Ortel’s Model 755MM-U is a 1550 nm transmitter suitable for link
lengths of up to 10 km with 79 channel analog loading. The 755MM-U
may also be used up to 20 km with a lower channel load of 11 analog
channels and 40 QAM channels. The 75Ω
RF video input supports
frequencies up to 870 MHz. A 50Ω (75
Ω
available ) RF input supports
frequencies from 950 to 2600 MHz for FTTP, L-Band satellite, and
wireless applications.
Applications
Video signal distribution to
HFC CATV and FTTP nodes
Video overlay in passive
optical networks (PON)
Combines CATV + L Band
inputs into a single platform
Also integrated into the RF/Optical design are Ortel’s low chirp control
and noise suppression circuitry. Ortel’s patented pre distortion
technology provides outstanding performance with any of Ortel’s wide
range of cooled broadband lasers. These modules have optional dual
redundant power supplies and SNMP capability.
The performance specifications indicated below are subject to change.
Performance Highlights
Parameter
Operating Temperature Range
Wavelength (Multiple Options)
Optical Power
Frequency Response
CNR (10 km)
CNR (20 km)
CSO (10 km)
CSO (20 km)
CTB (10 km)
CTB (20 km)
SBS (10 km)
SBS (20 km)
RF Input Return Loss
Optical Return Loss
Min
0
1530
10
47
950
52
48
-
-
-
-
-
-
16
40
Typ
25
-
-
-
-
-
-
-
-
-
-
-
-
-
Max
50
1560
-
870
2600
-
-56
-56
-63
-63
17
12
Unit
°C
nm
dBm
MHz
MHz
dB
dBc
dBc
dBc
dBc
dBm
dBm
dB
dB
Features
Optical Spectrum Reshaping
Technology
Optimized RF integration of
predistorter, amplifiers and
laser
Dual redundant power
supplies
Supports SNMP protocol
Complete, efficient laser bias
and TEC control circuitry
OEM/ODM opportunities
available through Ortel
Wideband Transmitter
Digital monitoring and control
ITU Wavelengths
-
-
See following pages for complete specifications and operating/test conditions.
For more information on this and other products:
Contact Sales at Ortel 626-293-3400, or visit www.emcore.com.
755MM-U 1550 nm Transmitter
DATASHEET- OCT, 2006
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in
excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect device reliability.
Parameter
Operating Temperature Range
Storage Case Temperature Range
RF Input Level
Symbol
T
OP
T
stg
-
Min.
0
-20
-
Max.
50
65
3
Unit
°
C
°
C
dBm
RF Characteristics
Parameter
Bandwidth
Frequency Response
RF Input Level
CNR
3
(10 km)
CNR
5
(20 km)
CSO
2
(10 km)
5
CSO (20 km)
CTB
2
(10 km)
5
CTB (20 km)
Input Impedance
75Ω Video Input Return Loss
75Ω Test Port Input Return Loss
50Ω Input Return Loss
4
1.Excludes tilt component.
2.CW carriers, 79 channel NTSC channel plan, 4 MHz noise bandwidth, -5 dBm received power, SMF-28 or equivalent.
3. CW carriers, 79 channel NTSC channel plan, 4 MHz noise bandwidth, 0 dBm received power, SMF-28 or equivalent
4. 75Ω option available
5. 11 channel NTSC channel plan with 40 channel QAM, 4 MHz noise bandwidth, 0 dBm received power, SMF-28 or equivalent
Condition
-
47-870 MHz
950-2600 MHz
79 channels analog
11 channel analog + 40 QAM
-
-
-
-
-
-
47 – 870 MHz RF Input
950-2600 MHz RF Input
47 to 870 MHz
47 to 870 MHz
950 to 2600 MHz
Min
47
-
-
-2.5
-5.8
52
48
-
-
-
-
-
-
16
16
10
Typ
-
-
-
-2
-5.3
-
-
-
-
-
-
75
4
50
-
-
-
Max
2600
1.5
3.5
1
Unit
MHz
dB
p-p
dB
p-p
dBm
dBm
dB
dB
dBc
dBc
dBc
dBc
Ohms
Ohms
dB
dB
dB
-1.5
-4.8
-
-
-56
-56
-63
-63
-
-
-
-
-
Optical Characteristics
Parameter
Optical Output Power
SBS Threshold
Side Mode Suppression Ratio
Optical Return Loss
1
Condition
-
10 km SMF-28
20 km SMF-28
-
APC style connector
Min
-
-
-
30
40
Typ
10
-
-
-
-
Max
-
17
12
-
-
Unit
dBm
dBm
dBm
dB
dB
1. In order to prevent reflection-induced distortion, the laser must be connected to an optical cable having a return loss of at least 55 dB for discrete
reflections and 30 dB for distributed reflections
2 of 5
755MM-U 1550 nm Transmitter
DATASHEET- OCT, 2006
Power Requirements
Parameter
AC Input Range
DC Input Range
Power
Min.
94
50
36
-
Max.
245
60
60
50
Unit
Vac
Hz
Vdc
W
Package Characteristics
Parameter
Height
Width
Depth
Weight
Dimension
1.75 (44), 1U
19 (483)
17.77(452) with fans
9.0 (4)
Unit
in. (mm.)
in. (mm.)
in. (mm.)
lbs. (kg.)
Part Number / Ordering Information
(Note: customization can be made available upon request)
755MM-U
-
-
-
- XX -
Channel Plan
A = NTSC 80-Ch
L Band Option
50 = 50 ohm
75 = 75 ohm
Options
Connectors
ITU Wavelengths
AC Power Cord
NA = N.AMERICA
UK = U.K. & IRE.
EU = EUROPE
EC = EC NEMA
JP = JAPAN
A = Dual PS + SNMP
SC = SC/APC
ee= 21, 1560.61nm
B = Dual PS, No SNMP
FC = FC/APC
:
C = Single PS, No SNMP EC = E2000/APC ee= 59, 1530.33 nm
3 of 5
755MM-U 1550 nm Transmitter
DATASHEET- OCT, 2006
ITU Wavelength Channel Designations
Channel
21
23
25
27
29
31
33
Wavelength
(nm)
1560.61
1558.98
1557.36
1555.75
1554.13
1552.52
1550.92
Channel
35
37
39
41
43
45
47
Wavelength
(nm)
1549.32
1547.72
1546.12
1544.53
1542.94
1541.35
1539.77
Channel
49
51
53
55
57
59
Wavelength
(nm)
1538.19
1536.61
1535.04
1533.47
1531.90
1530.33
4 of 5
755MM-U 1550 nm Transmitter
DATASHEET- OCT, 2006
Laser Safety Information
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH
Class IIIb laser product. This device has been classified with the FDA/CDRH under accession number 0220800.
Single-mode bulkhead receptacles with internal SC/APC connectors (standard).
Wavelength = 1.5
μm.
Maximum power = 30 mW.
Product is shipped with internal AC/DC and DC/DC power supply converters.
Caution: Use of controls, adjustments and procedures other than those specified herein may result in
hazardous laser radiation exposure.
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation.
According to the official information of SHT31 Smart Gadget, we know that the module is designed with two single-chip systems. The nrf51822 is a Bluetooth module without too many pins, and the MC9S08L...
I admit that I was lazy. After finding a job, the SOPC competition on the 16th, and the daily lab classes recently, I didn't want to adjust it at all, haha. Today I took some time to adjust the ad fir...
The emulator is a USB MSP430 (FPA) JTAG/BSL programming emulator. I made a core board myself. There was no problem downloading the simulation for the first few times, but later it could not download a...
Current feedback amplifiers (CFAs) have not historically been the first choice for transimpedance amplifiers (TIAs) because they have high inverting input current and inverting input current noise, wh...
According to foreign media reports, Ford Motor has applied to the U.S. Patent and Social Security Administration (USPTO) for a patent for a remote vehicle control system that may be used in future ...[Details]
1. Equipment Overview
Shell-and-tube heat exchangers are a common heat exchange device used in chemical evaporation and heating equipment. Currently, the tubesheets of shell-and-tube heat exch...[Details]
Wave soldering is a crucial electronic component soldering technique used in the production of a wide range of electronic devices, from home appliances to computers to avionics. The process is wide...[Details]
The problem of dynamic sealing of equipment always exists with the operation of the equipment. Today, we have specially sorted out the various commonly used sealing forms, usage scope and character...[Details]
EtherCAT (Ethernet for Control Automation Technology) is a real-time industrial fieldbus communication protocol based on an Ethernet-based development framework. EtherCAT is one of the fastest indu...[Details]
In recent years, the government has increasingly supported electric vehicles, and the number of electric vehicles has increased. Observant drivers will notice that there are many more green license...[Details]
According to foreign media reports, secondary battery materials company POSCO Future M announced that it has successfully developed two experimental (prototype) positive electrode materials for the...[Details]
This paper proposes a temperature real-time transmission and display solution based on LED optical data transmission, with Jingwei Yager low-power FPGA HR (Yellow River) series as the main controll...[Details]
Since its invention in the mid-1940s, the microwave oven has evolved from a humble beginning to commercial use, entering homes in the 1960s and rapidly gaining popularity. Its basic functionality a...[Details]
In the electronics manufacturing industry, surface mount technology (SMT) placement machines are core equipment for production lines. However, with many different models available on the market, ch...[Details]
Based on the commutation technology, thyristor rectifiers are classified into two main types. Line-commutated and force-commutated inverters are commonly used, while other commutated inverters, nam...[Details]
On August 22, the Wall Street Journal reported on the 21st local time that the new US government does not plan to acquire equity in semiconductor wafer foundry giant TSMC and Micron, one of the thr...[Details]
There are more and more electric vehicles. Recently, I have heard some news about electric vehicles performing poorly in winter. I would like to briefly introduce whether heat pump technology is mo...[Details]
With growing environmental awareness, the continuous improvement of three-electric technology and the increasing deployment of infrastructure such as charging stations, the electrification of new e...[Details]
When American cartoonist Chester Gould sketched the watch on Dick Tracy's wrist, he had no idea that science fiction would become reality 70 years later. As a comic strip artist, Gould imagined fut...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD
