UPD70F3114GC-8EU datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> UPD70F3114GC-8EU

UPD70F3114GC-8EU: DescriptionRISC Microcontroller, 32-Bit, FLASH, 40MHz, CMOS, PQFP100, 14 X 14 MM, FINE PITCH, PLASTIC, LQFP-100; CategoryThe embedded processor and controller Microcontrollers and processors; File Size4MB，692 Pages; ManufacturerNEC Electronics

Download Datasheet Parametric View All

UPD70F3114GC-8EU Overview

RISC Microcontroller, 32-Bit, FLASH, 40MHz, CMOS, PQFP100, 14 X 14 MM, FINE PITCH, PLASTIC, LQFP-100

UPD70F3114GC-8EU Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
package instruction	14 X 14 MM, FINE PITCH, PLASTIC, LQFP-100
Reach Compliance Code	compliant
Has ADC	YES
Address bus width	22
bit size	32
maximum clock frequency	50 MHz
DAC channel	NO
DMA channel	YES
External data bus width	16
JESD-30 code	S-PQFP-G100
JESD-609 code	e0
length	14 mm
Number of I/O lines	53
Number of terminals	100
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
PWM channel	YES
Package body material	PLASTIC/EPOXY
encapsulated code	LFQFP
Package shape	SQUARE
Package form	FLATPACK, LOW PROFILE, FINE PITCH
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
Certification status	Not Qualified
ROM programmability	FLASH
Maximum seat height	1.6 mm
speed	40 MHz
Maximum supply voltage	3.6 V
Minimum supply voltage	3 V
Nominal supply voltage	3.3 V
surface mount	YES
technology	CMOS
Temperature level	INDUSTRIAL
Terminal surface	TIN LEAD
Terminal form	GULL WING
Terminal pitch	0.5 mm
Terminal location	QUAD
Maximum time at peak reflow temperature	NOT SPECIFIED
width	14 mm
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER, RISC
Base Number Matches	1

Preview

Download Datasheet

View All

User’s Manual

V850E/IA2

32-Bit Single-Chip Microcontrollers

Hardware

PD703114

PD703114(A)

PD70F3114

PD70F3114(A)

Document No. U15195EJ5V0UD00 (5th edition)

Date Published August 2005 N CP(K)

2001

Printed in Japan

NOTES FOR CMOS DEVICES

VOLTAGE APPLICATION WAVEFORM AT INPUT PIN

Waveform distortion due to input noise or a reflected wave may cause malfunction. If the input of the

CMOS device stays in the area between V

(MAX) and V

(MIN) due to noise, etc., the device may

malfunction. Take care to prevent chattering noise from entering the device when the input level is fixed,

and also in the transition period when the input level passes through the area between V

(MAX) and

(MIN).

HANDLING OF UNUSED INPUT PINS

Unconnected CMOS device inputs can be cause of malfunction. If an input pin is unconnected, it is

possible that an internal input level may be generated due to noise, etc., causing malfunction. CMOS

devices behave differently than Bipolar or NMOS devices. Input levels of CMOS devices must be fixed

high or low by using pull-up or pull-down circuitry. Each unused pin should be connected to V

or GND

via a resistor if there is a possibility that it will be an output pin. All handling related to unused pins must

be judged separately for each device and according to related specifications governing the device.

PRECAUTION AGAINST ESD

A strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and

ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as

much as possible, and quickly dissipate it when it has occurred.

Environmental control must be

adequate. When it is dry, a humidifier should be used. It is recommended to avoid using insulators that

easily build up static electricity. Semiconductor devices must be stored and transported in an anti-static

container, static shielding bag or conductive material. All test and measurement tools including work

benches and floors should be grounded.

The operator should be grounded using a wrist strap.

Semiconductor devices must not be touched with bare hands. Similar precautions need to be taken for

PW boards with mounted semiconductor devices.

STATUS BEFORE INITIALIZATION

Power-on does not necessarily define the initial status of a MOS device. Immediately after the power

source is turned ON, devices with reset functions have not yet been initialized. Hence, power-on does

not guarantee output pin levels, I/O settings or contents of registers. A device is not initialized until the

reset signal is received. A reset operation must be executed immediately after power-on for devices

with reset functions.

POWER ON/OFF SEQUENCE

In the case of a device that uses different power supplies for the internal operation and external

interface, as a rule, switch on the external power supply after switching on the internal power supply.

When switching the power supply off, as a rule, switch off the external power supply and then the

internal power supply. Use of the reverse power on/off sequences may result in the application of an

overvoltage to the internal elements of the device, causing malfunction and degradation of internal

elements due to the passage of an abnormal current.

The correct power on/off sequence must be judged separately for each device and according to related

specifications governing the device.

INPUT OF SIGNAL DURING POWER OFF STATE

Do not input signals or an I/O pull-up power supply while the device is not powered. The current

injection that results from input of such a signal or I/O pull-up power supply may cause malfunction and

the abnormal current that passes in the device at this time may cause degradation of internal elements.

Input of signals during the power off state must be judged separately for each device and according to

related specifications governing the device.

User’s Manual U15195EJ5V0UD

These commodities, technology or software, must be exported in accordance

with the export administration regulations of the exporting country.

Diversion contrary to the law of that country is prohibited.

•

The information in this document is current as of March, 2005. The information is subject to change

without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or

data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all

products and/or types are available in every country. Please check with an NEC Electronics sales

representative for availability and additional information.

•

No part of this document may be copied or reproduced in any form or by any means without the prior

written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may

appear in this document.

•

NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual

property rights of third parties by or arising from the use of NEC Electronics products listed in this document

or any other liability arising from the use of such products. No license, express, implied or otherwise, is

granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.

•

Descriptions of circuits, software and other related information in this document are provided for illustrative

purposes in semiconductor product operation and application examples. The incorporation of these

circuits, software and information in the design of a customer's equipment shall be done under the full

responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by

customers or third parties arising from the use of these circuits, software and information.

•

While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,

customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To

minimize risks of damage to property or injury (including death) to persons arising from defects in NEC

Electronics products, customers must incorporate sufficient safety measures in their design, such as

redundancy, fire-containment and anti-failure features.

•

NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and

"Specific".

The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-

designated "quality assurance program" for a specific application. The recommended applications of an NEC

Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of

each NEC Electronics product before using it in a particular application.

"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio

and visual equipment, home electronic appliances, machine tools, personal electronic equipment

and industrial robots.

"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster

systems, anti-crime systems, safety equipment and medical equipment (not specifically designed

for life support).

"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems and medical equipment for life support, etc.

The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC

Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications

not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to

determine NEC Electronics' willingness to support a given application.

(Note)

(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its

majority-owned subsidiaries.

(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as

defined above).

M8E 02. 11-1

User’s Manual U15195EJ5V0UD

Recommended Resources

Common Mode Volume and Tone Control Circuit

Fully functional refrigerator protector

68722 type electrocardiograph circuit

Digital display temperature measurement and control circuit

Computer motherboard circuit diagram 440BX_02

How to run Chinese programs in English CE?: Need to install fonts? How?...; zoloq Embedded System

I have a problem with the BIOS program. Can you please help me?: [i=s] This post was last edited by dontium on 2015-1-23 13:31 [/i] 2812 The program written in BIOS runs two tasks first, then the task is suspended, and then it should run a PRD function I defined, b...; linjh052 Analogue and Mixed Signal

I have a question that has puzzled me for several days. I hope you can give me some advice.: I wrote a small driver called keyboard.sys, and then I used SRVINSTW.EXE to register this driver as a service called mykeyboard. Why do I always get a prompt "System error 161 The specified path is in...; ahwangbang Embedded System

[RISC-V MCU CH32V103 Review] SPI Test: I have an OLED screen with SPI interface, 128*64 in size, and the control chip is SSD1306This screen is tested by me under the STM32 development board. The specific parameters of STM32 are as follows ...; bigbat Domestic Chip Exchange

TD digital cordless phone to be launched this year: a killer product: After the home information machine, TD-SCDMA has launched fixed-line products. The launch of the world's first digital cordless phone solution based on TD-SCDMA marks that China Mobile's TD-SCDMA prod...; xtss RF/Wirelessly

Driver and application interaction issues: There is a virtual camera driver in WINDOWS DDK. If we use it, it will display a picture. I want to use another program to control the source of this virtual camera. That is to say, if I want to make ...; TonnySun Embedded System

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components