The MCS 51 CHMOS microcontroller products are fabricated on Intel’s reliable CHMOS process and are
functionally compatible with the standard MCS 51 HMOS microcontroller products This technology combines
the high speed and density characteristics of HMOS with the low power attributes of CHMOS This combina-
tion expands the effectiveness of the powerful MCS 51 microcontroller architecture and instruction set
Like the MCS 51 HMOS microcontroller versions the MCS 51 CHMOS microcontroller products have the
following features 4 Kbytes of EPROM ROM (87C51 80C51BH respectively) 128 bytes of RAM 32 I O lines
two 16-bit timer counters a five-source two-level interrupt structure a full duplex serial port and on-chip
oscillator and clock circuitry In addition the MCS 51 CHMOS microcontroller products exhibit low operating
power along with two software selectable modes of reduced activity for further power reduction Idle and
Power Down
The Idle mode freezes the CPU while allowing the RAM timer counters serial port and interrupt system to
continue functioning The Power Down mode saves the RAM contents but freezes the oscillator causing all
other chip functions to be inoperative
The 87C51 is the EPROM version of the 80C51BH It contains 4 Kbytes of on-chip program memory that can
be electrically programmed and can be erased by exposure to ultraviolet light The 87C51 EPROM array uses
a modified Quick-Pulse Programming algorithm by which the entire 4 Kbyte array can be programmed in about
12 seconds
NOTICE
This datasheet contains information on products in full production Specifications within this datasheet
are subject to change without notice Verify with your local Intel sales office that you have the latest
datasheet before finalizing a design
Other brands and names are the property of their respective owners
Information in this document is provided in connection with Intel products Intel assumes no liability whatsoever including infringement of any patent or
copyright for sale and use of Intel products except as provided in Intel’s Terms and Conditions of Sale for such products Intel retains the right to make
changes to these specifications at any time without notice Microcomputer Products may have minor variations to this specification known as errata
[size=18px]Interrupt output problem in cc2430 chip. Here is the approximate structure of the program for(i=0;i<9;i++) { for(j=0;j<16;j++); ENCDI=INDATA[i*16+j]; //Put the data to be processed in ENCDI...
AVCC: power supply for analog part; AGND: analog ground DVCC: power supply for digital part; DGND: digital ground. This distinction is to isolate the digital part from the analog part and reduce the i...
This glossary collects op amp terms and specifications to provide a handy reference guide for designers. This article describes op amp parameters listed in the Electrical Characteristics table of an o...
I will be doing my graduation project in a few days, but I have never done it before and now I have basically no idea. Please help me. Topic: Experimental research and design of wireless receiver base...
I am porting UIP recently and compiling it in ADS1.2. An error occurred during compilation, described as Error: (serious) ......: size of 'struct uip_eth_addr' needed but not yet defined. The error co...
Is electromagnetic radiation from electric vehicles harmful to the human body? Recently, the issue of electromagnetic radiation from electric vehicles has garnered widespread attention. However, pu...[Details]
As the number of cars increases, environmental pressures are also increasing. At this time, some people are saying that new energy vehicles are energy-efficient and environmentally friendly, and ar...[Details]
The most significant feature of IPS panels is that both electrodes are located on the same surface, unlike other LCD panels, which have electrodes arranged on top and bottom surfaces in a three-dim...[Details]
With the rapid adoption of smart electric vehicles, automotive chips are evolving from auxiliary control units to the foundation of the entire vehicle's intelligence. Their applications extend from...[Details]
On August 21, WeRide officially launched WePilot AiDrive, a one-stage end-to-end assisted driving solution developed in cooperation with Bosch. This comes only half a year after the two parties' "t...[Details]
Reflow soldering is one of the most commonly used methods in electronics manufacturing, allowing for the soldering of large numbers of components in a relatively short time. However, any experience...[Details]
Civilian internal combustion engines operate in the range of approximately 1000-4000 rpm. This results in the engine's kinetic energy being ineffective at low or high rpm, making starting difficult...[Details]
"I want to ask why there are so many manufacturers making mobile phone CPUs, but only Intel and AMD make computer CPUs?"
The progress of domestic PC CPU production has disappointed many ...[Details]
Cadence and NVIDIA Collaborate to Revolutionize Power Analysis Technology, Accelerating Development of Billion-Gate AI Designs
Cadence's new Palladium Dynamic Power Analysis applicat...[Details]
Bearing wear is a common equipment problem in the manufacturing industry. In today's world where controlling production costs is advocated, using repair technology to reduce the scrapping and repla...[Details]
1. Static Balance
Static balancing is performed on one correction surface of the rotor. The remaining unbalance after correction is used to ensure that the rotor is within the specified range ...[Details]
No one expected that after about a day of downtime, four or five thermostats on the control panel would display four 0000s and flash. We knew it was caused by poor contact of the temperature sensin...[Details]
On August 18, Zhiyuan Robotics released information showing that the company's entire product line is officially on sale.
The full range of products launched this time includes six major produ...[Details]
Simply put, the cockpit domain control chip is the chip that controls the cockpit domain. It's like the brain of the cockpit, responsible for processing and controlling signals from various devices...[Details]
Sometimes an IAR project is closed abnormally. When you open the IAR project again, the project will not be displayed in the Workspace column, as shown in the following figure:
C...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
