an oscillator STOP flag. Block access of the register
map is identical to the ST device. Two additional regis-
ters, which are accessed individually, are required for
the trickle charger and flag. The clock/calendar pro-
vides seconds, minutes, hours, day, date, month, and
year information. A built-in power-sense circuit detects
power failures and automatically switches to the back-
up supply. Reads and writes are inhibited while the
clock continues to run. The device is programmed seri-
ally through an I
2
C
*
bidirectional bus.
Features
♦
Enhanced Second Source for the ST M41T00
♦
Available in a Surface-Mount Package with an
Integrated Crystal (DS1340C)
♦
Fast (400kHz) I
2
C Interface
♦
Software Clock Calibration
♦
RTC Counts Seconds, Minutes, Hours, Day, Date,
Month, and Year
♦
Automatic Power-Fail Detect and Switch Circuitry
♦
Trickle-Charge Capability
♦
Low Timekeeping Voltage Down to 1.3V
♦
Three Operating Voltage Ranges (1.8V, 3V, and 3.3V)
♦
Oscillator Stop Flag
♦
Available in 8-Pin
µSOP
or SO Packages
♦
Underwriters Laboratory (UL) Recognized
DS1340
Applications
Portable Instruments
Point-of-Sale Equipment
Medical Equipment
Telecommunications
PART
DS1340Z-18
DS1340Z-3
DS1340Z-33
DS1340U-18
DS1340U-3
DS1340U-33
V
CC
CRYSTAL
V
CC
R
PU
R
PU
1
X1
6 SCL
CPU
2
X2
8
V
CC
FT/OUT
7
C1
V
CC
Ordering Information
TEMP RANGE PIN-PACKAGE
-40°C to +85°C 8 SO (0.150in)
-40°C to +85°C 8 SO (0.150in)
-40°C to +85°C 8 SO (0.150in)
-40°C to +85°C 8 µSOP
-40°C to +85°C 8 µSOP
-40°C to +85°C 8 µSOP
-40°C to +85°C 16 SO
-40°C to +85°C 16 SO
-40°C to +85°C 16 SO
-40°C to +85°C 8 SO (0.150in)
-40°C to +85°C 8 SO (0.150in)
-40°C to +85°C 8 SO (0.150in)
-40°C to +85°C 8 µSOP
-40°C to +85°C 16 SO
-40°C to +85°C 16 SO
-40°C to +85°C 16 SO
TOP
MARK
†
D1340-18
DS1340-3
D1340-33
1340A1-18
1340A1-3
1340A1-33
1340C-18
1340C-3
1340C-33
D1340-18
DS1340-3
D1340-33
1340A1-18
1340A1-3
1340A1-33
1340C-18
1340C-3
1340C-33
Typical Operating Circuit
DS1340C-18
DS1340C-3
DS1340C-33
DS1340Z-18+
DS1340Z-3+
DS1340Z-33+
DS1340U-3+
DS1340C-18#
DS1340C-3#
DS1340C-33#
DS1340U-18+ -40°C to +85°C 8 µSOP
DS1340
5 SDA
R
PU
= t
R
/ C
B
GND
4
V
BACKUP
3
DS1340U-33+ -40°C to +85°C 8 µSOP
+
Denotes a lead-free/RoHS-compliant device.
*Purchase
of I
2
C components from Maxim Integrated Products,
Inc., or one of its sublicensed Associated Companies, conveys
a license under the Philips I
2
C Patent Rights to use these com-
ponents in an I
2
C system, provided that the system conforms to
the I
2
C Standard Specification as defined by Philips.
#
Denotes a RoHS-compliant device that may include lead that
is exempt under RoHS requirements. The lead finish is JESD97
category e3, and is compatible with both lead-based and lead-
free soldering processes.
†
A "+" anywhere on the top mark denotes a lead-free device.
A "#" denotes a RoHS-compliant device.
Pin Configurations appear at end of data sheet.
______________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
I
2
C RTC with Trickle Charger
DS1340
ABSOLUTE MAXIMUM RATINGS
Voltage Range on V
CC
Pin Relative to Ground .....-0.3V to +6.0V
Voltage Range on SDA, SCL, and FT/OUT
Relative to Ground..................................-0.3V to (V
CC
+ 0.3V)
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-55°C to +125°C
Soldering Temperature Range............................See IPC/JEDEC
J-STD-020 Specification
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
As shown in the picture, this is a bluetooth antenna. After coming out of the chip, the antenna splits into two paths, one goes back to the GND of the motherboard, and the other goes out. I would like...
[i=s]This post was last edited by paulhyde on 2014-9-15 09:46[/i] We have built the 90MHZ band circuit of ad603 according to the information, but there is self-excitation. We have added decoupling cap...
[align=left][color=rgb(25, 25, 25)][font="]The oscilloscope is a commonly used electronic measuring instrument with many advantages such as high measurement accuracy, good stability, strong durability...
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
1. Introduction
Since the 1980s, with the continuous development of automotive electronic technology, there are more and more electronic control units in automobiles, such as electronic fuel i...[Details]
In recent years, lighting has become an important area that countries around the world are targeting to promote energy conservation and environmental protection. According to statistics, about 20% ...[Details]
Power management solutions for today's portable application processors are becoming increasingly integrated. Total power consumption, standby and sleep current consumption affect battery size, bill...[Details]
1 Introduction
As an emerging microfabrication technology, micro-electromechanical system (MEMS) technology has begun to be applied in various fields. It can integrate functions such as inform...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
Since the No. 4 blast furnace of Handan Iron and Steel was put into operation in 1993, its external equipment has been seriously aged, and the original PLC control system TDC3000 of the hot blast furn...[Details]
On the afternoon of July 10, Beijing time, Taiwan's largest chip designer MediaTek expects its smartphone chip shipments to grow by double digits in the third quarter of this year, and the company is ...[Details]
With the rapid development of intelligent control technology, computers and information technology, the trend of information appliances IA (Information Application), computers and communications integ...[Details]
Flooded Batteries
This battery developed in Germany can be used to power flashlights, strobe lights and toys as long as it is filled with water. This battery can be stored for 50 years and can...[Details]
Introduction
Liquid crystal, as a display device, is widely used in low-power products such as instruments, meters, and electronic equipment with its unique advantages. In the past, the displ...[Details]
Abstract: The output of high-range acceleration sensor is less than 10 mV under the excitation of small signal. The noise of traditional test system may cover such small voltage signal, so that hig...[Details]
LED guardrail lights use fluorescent tubes or LEDs as light sources and continuous guardrails as carriers to form an approximately linear guardrail light strip. This article mainly introduces...[Details]
Only a small number of LED manufacturers can produce high-quality LEDs. For applications that are only used for simple indication, low-quality LEDs are sufficient. However, high-quality LEDs must...[Details]
To understand how and why OLED power supply affects display image quality, you must first understand OLED display technology and power supply requirements. This article will explain the latest OLED...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
