Lite-On began producing LED lamps in 1975; the company has steadily grown to become one of the world's largest manufacturers of optoelectronics products by providing customers with visible and infrared product solutions. High-volume production of commercial and application-specific products, as well as strong R&D and vertical integration capabilities have proven to be key and differentiating factors in Lite-On's success.
[i=s]This post was last edited by ddllxxrr on 2014-4-3 15:57[/i] Everyone is going to be dismissive again. Who hasn't seen a flashlight? I feel the same way about this one, but I received this one a l...
To be honest, I think it is a good idea to use C to write microcontroller programs, not to mention the portability. Although assembly language is very suitable for registers and has a fast processing ...
1. Primary school numerical calculation: 0.65( 。)73( 。)÷1.5( 。)4869( 。)=0.X( 。)XXX………XXXX( 。) 2. Use two common I/O ports of a 3.3V working CPU, such as P0.0, P0.1 and Vc=3.3V, R1>1K, R2=?, R3=? to po...
In DSP operations, it is often necessary to process the input time domain signal in the frequency domain and then restore it to the time domain signal, which requires FFT and IFFT operations:x(n) - FF...
I don't know if there is a follow function in the forum. For example, if I like a certain moderator's article, I can follow him. The system can give a prompt or something :pleased:...
LED technology has made rapid progress, and improvements in chip design and materials have promoted the development of brighter and more durable light sources, and the scope of light source applica...[Details]
introduction
LEDs continue to gain popularity in automotive applications, thanks to their long lifespan and the flexibility they offer for body styling and interior design. Some may be surpris...[Details]
A few days ago, I bought an 8LED flashlight in the market (the flashlight uses No. 5 batteries). Because I had other things to do, I didn't pay attention when purchasing it. When I got home and use...[Details]
In order to reduce the proportion of data transmission time in the entire system processing time index, the data transmission rate should be no less than E1 (2.048Mb/s), and the communication...[Details]
1. What is the difference between the continuous output power and the peak output power of a power inverter?
Continuous power and peak power differ in the meaning they express.
Continuous...[Details]
Consumer demand for multimedia embedded processor products is growing rapidly, requiring both increased performance and reduced power consumption. However, high-performance processing requires incr...[Details]
Designing with FPGA, DSP or microprocessor is a critical part of the design and also takes the most time. System-level designers can benefit greatly by focusing their main efforts on system design, an...[Details]
Abstract: According to the requirements of pulse carburizing power supply, an IGBT strong drive circuit with high reliability, no signal transmission delay, strong driving ability and other charact...[Details]
As a new type of display material, LED dot matrix has developed rapidly in recent years and has a good market prospect. Among them, LED large-screen display screens are widely used in industries,...[Details]
At present, electronic equipment used in various electronic equipment and systems still uses printed circuit boards as the main assembly method. Practice has proved that even if the circuit schem...[Details]
1 Introduction
MAX16801A/B and MAX16802A/B use constant current to
drive
HB
LEDs
in
general lighting and
display
applications
to provide the required control functions. ...[Details]
1 Overview
Early power factor correction (PFC) technology was mainly implemented by passive devices such as inductors and capacitors, which is called passive PFC technology. The method is to c...[Details]
1 Introduction
As the mandatory national standard GB15579.10-2008 is about to be implemented, how to improve the electromagnetic compatibility (EMC) of inverter welding machines to meet the ...[Details]
The energy-saving concept of LED display screens has quietly become a highlight that attracts consumers' attention and is also the reason for its explosive growth in recent years. Of course, after...[Details]
Dow Corning Electronics Group has introduced
a new
optical
encapsulant, DOW CORNING OE-6450,
that is said to improve
LED
light output
. This new two-part formula cures into an elasti...[Details]