EEWORLDEEWORLDEEWORLD

Part Number

Search

575S10IB32M0000

Description
Clipped Sine Output Oscillator, 32MHz Nom, GREEN, HERMETIC SEALED, CERAMIC PACKAGE-4
CategoryPassive components    oscillator   
File Size245KB,4 Pages
ManufacturerCTS
Environmental Compliance  
Download Datasheet Parametric View All

575S10IB32M0000 Overview

Clipped Sine Output Oscillator, 32MHz Nom, GREEN, HERMETIC SEALED, CERAMIC PACKAGE-4

575S10IB32M0000 Parametric

Parameter NameAttribute value
Is it lead-free?Lead free
Is it Rohs certified?conform to
MakerCTS
Reach Compliance Codecompliant
Other featuresTAPE AND REEL
Ageing1 PPM/FIRST YEAR
Maximum control voltage2.5 V
Minimum control voltage0.5 V
Frequency Adjustment - MechanicalNO
Frequency offset/pull rate8 ppm
frequency stability1%
JESD-609 codee4
Installation featuresSURFACE MOUNT
Nominal operating frequency32 MHz
Maximum operating temperature85 °C
Minimum operating temperature-40 °C
Oscillator typeCLIPPED SINE
Output impedance10000 Ω
Output level0.8 V
physical size7.0mm x 5.0mm x 2.0mm
Nominal supply voltage5 V
surface mountYES
Terminal surfaceGold (Au) - with Nickel (Ni) barrier
Base Number Matches1
Model 575
Temperature Compensated Crystal Oscillator
FEATURES
Clipped Sine Wave Output
Optional Voltage Control for Frequency Tuning [VCTCXO]
7.0mmx5.0mm Surface Mount Package
Frequency Range 10 – 40 MHz
[Standard Frequencies List Shown Below]
Fundamental Crystal Design
Frequency Stability, several options to choose from, ±0.5ppm ~ ±5.0ppm
Operating Voltage, +2.8Vdc ~ +5.0Vdc
Operating Temperature to -40°C to +85°C
Tape & Reel Packaging Available
RoHS/Green Compliant (6/6)
APPLICATIONS
The Model 575 Temperature Compensated Crystal Oscillator (TCXO) is a quartz
based, clipped sine wave output, analog temperature compensated oscillator with
optional frequency tuning, in a hermetically sealed ceramic package. M575 is suitable for base stations,
wireless communications, test and measurement, Femtocell, WLAN/WiMax/WIFI and mobile phone applications.
ORDERING INFORMATION
575
SUPPLY VOLTAGE
T = +2.8Vdc
R = +3.0Vdc
L = +3.3Vdc
S = +5.0Vdc
FREQUENCY STABILITY *
05
10
15
20
25
30
40
50
=
=
=
=
=
=
=
=
±
±
±
±
±
±
±
±
0.5 ppm
1
1.0 ppm
1.5 ppm
2.0 ppm
2.5 ppm (std)
3.0 ppm
4.0 ppm
5.0 ppm
M
FREQUENCY IN MHz
M - indicates MHz and decimal point.
2
[See table below for standard frequencies available.]
FREQUENCY TUNING (AFC)
A = ± 5 ppm (std)
B = ± 8 ppm
C = ± 10 ppm
D = ± 12 ppm
T = TCXO (no AFC)
{V
CON
: 1.5Vdc ± 1.0Vdc}
OPERATING TEMPERATURE RANGE
H = -10°C to +60°C
C = -20°C to +70°C
D = -30°C to +85°C (std)
I = -40°C to +85°C
* Frequency vs. Temperature Only
1] Only available with temperature range codes "H" and "C".
2] Frequency is recorded with two leading digits before the ‘M’ and 4 significant digits after the ‘M’ (including zeros).
[Ex. XXMXXXX (10M0000), XXMXXXX (16M3840)]
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
M575 Standard Frequencies
10.000 MHz
10.240 MHz
12.000 MHz
12.288 MHz
12.800 MHz
13.000 MHz
14.000 MHz
14.400 MHz
15.360 MHz
16.000 MHz
16.800 MHz
18.000 MHz
18.432 MHz
19.200 MHz
19.440 MHz
19.998 MHz
20.000 MHz
20.480 MHz
21.000 MHz
24.000 MHz
24.576 MHz
25.000 MHz
26.000 MHz
27.000 MHz
32.000 MHz
32.768 MHz
38.880 MHz
40.000 MHz
Document No. 008-0307-0
Page 1 - 4
Rev. F
www.ctscorp.com
ARM Developer Suit
ARM DeveloperSuit...
yepizhou ARM Technology
Understanding and Optimizing the Electromagnetic Compatibility of Switch-Mode Power Supplies
The electromagnetic compatibility problem of switching power supply always coexists with switching power supply technology. How to optimize it? Here is an article for you to read...
dontium Analogue and Mixed Signal
What is the function of the potentiometer next to the LM3900 op amp? How to adjust it?
[i=s]This post was last edited by wuxanzi on 2017-9-30 14:54[/i]...
wuxanzi Analog electronics
Can I boot from sdcard if mmc/sdcard is supported? What is the process?
For example, the samxung 6410 has register definitions for booting from mmc/sdcard, and the board has a switch. What's going on? If you tell it to boot from sdcard, will it boot from sdcard? :), can y...
502815059 Embedded System
Using the ADC of MSP430F5437A to measure the voltage of two 1.5v dry batteries
How to use the MSP430F5437A ADC to measure the voltage of two 1.5V dry batteries? How to design the circuit and how to implement it?...
yyh9037 Analogue and Mixed Signal
AD8629 input square wave abnormality
AD8629 and FZT1047A are used to form a V/I conversion circuit. The input is a square wave voltage UH=3V, UL=0.45V, f=20kHz. The output is a square wave current IH=200mA, IL=30mA, f=20kHz. The PSpice s...
microyw ADI Reference Circuit

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1705  2860  935  2063  779  35  58  19  42  16 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号