5962-1024303KXC datasheet, PDF

Datasheet> All Categories > Analog mixed-signal IC> The signal circuit> 5962-1024303KXC

5962-1024303KXC: DescriptionSingle-Ended Multiplexer, 1 Func, 16 Channel, CMOS, CDSO24,; CategoryAnalog mixed-signal IC The signal circuit; File Size240KB，20 Pages; ManufacturerAeroflex; Websitehttp://www.aeroflex.com/

Download Datasheet Parametric Compare View All

5962-1024303KXC Overview

Single-Ended Multiplexer, 1 Func, 16 Channel, CMOS, CDSO24,

5962-1024303KXC Parametric

Parameter Name	Attribute value
Maker	Aeroflex
package instruction	SOP, SOP24,.4
Reach Compliance Code	unknown
Analog Integrated Circuits - Other Types	SINGLE-ENDED MULTIPLEXER
JESD-30 code	R-XDSO-G24
Number of channels	16
Number of functions	1
Number of terminals	24
Maximum on-state resistance (Ron)	1000 Ω
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package body material	CERAMIC
encapsulated code	SOP
Encapsulate equivalent code	SOP24,.4
Package shape	RECTANGULAR
Package form	SMALL OUTLINE
power supply	5 V
Certification status	Not Qualified
Filter level	38535V;38534K;883S
Maximum supply current (Isup)	5 mA
Nominal supply voltage (Vsup)	5 V
surface mount	YES
technology	CMOS
Temperature level	MILITARY
Terminal form	GULL WING
Terminal pitch	1.27 mm
Terminal location	DUAL
Base Number Matches	1

Preview

Download Datasheet

View All

REVISIONS

LTR

DESCRIPTION

DATE (YR-MO-DA)

APPROVED

REV

SHEET

REV

SHEET

REV STATUS

OF SHEETS

PMIC N/A

REV

SHEET

PREPARED BY

Steve L. Duncan

CHECKED BY

Greg Cecil

APPROVED BY

Charles F. Saffle

DRAWING APPROVAL DATE

13-03-27

REVISION LEVEL

STANDARD

MICROCIRCUIT

DRAWING

THIS DRAWING IS

AVAILABLE

FOR USE BY ALL

DEPARTMENTS

AND AGENCIES OF THE

DEPARTMENT OF DEFENSE

AMSC N/A

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

http://www.dscc.dla.mil/

MICROCIRCUIT, CMOS, LINEAR,

ANALOG MULTIPLEXER, 16 CHANNEL,

+3.3 TO +5 VOLT, MONOLITHIC SILICON

SIZE

SHEET

CAGE CODE

67268

1 OF

5962-10243

5962-E319-13

DSCC FORM 2233

APR 97

2. APPLICABLE DOCUMENTS

2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part

of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-PRF-38534 - Hybrid Microcircuits, General Specification for.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883 - Test Method Standard Microcircuits.

MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.

DEPARTMENT OF DEFENSE HANDBOOKS

MIL-HDBK-103 - List of Standard Microcircuit Drawings.

MIL-HDBK-780 - Standard Microcircuit Drawings.

(Copies of these documents are available online at

https://assist.mil/quicksearch/

or from the Standardization Document Order

Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text

of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Item requirements. The individual item performance requirements for device classes D, E, G, H, and K shall be in

accordance with MIL-PRF-38534. Compliance with MIL-PRF-38534 shall include the performance of all tests herein or as

designated in the device manufacturer's Quality Management (QM) plan or as designated for the applicable device class. The

manufacturer may eliminate, modify or optimize the tests and inspections herein, however the performance requirements as

defined in MIL-PRF-38534 shall be met for the applicable device class. In addition, the modification in the QM plan shall not

affect the form, fit, or function of the device for the applicable device class.

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified

in MIL-PRF-38534 and herein.

3.2.1 Case outline(s). The case outline(s) shall be in accordance with 1.2.4 herein and figure 1.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 2.

3.2.3 Truth table(s). The truth table(s) shall be as specified on figure 3.

3.2.4 Switching test waveform(s). The switching test waveform(s) shall be as specified on figure 4.

3.2.5 Block diagram. The block diagram(s) shall be as specified on figure 5.

3.2.6 Radiation exposure circuits. The radiation exposure circuits shall be maintained by the manufacturer under document

revision level control and shall be made available to the preparing and acquiring activity upon request.

3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are

as specified in table I and shall apply over the full specified operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are defined in table I.

STANDARD

MICROCIRCUIT DRAWING

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

SIZE

REVISION LEVEL

5962-10243

SHEET

DSCC FORM 2234

APR 97

5962-1024303KXC Related Products

	5962-1024303KXC	5962-1024303KXA
Description	Single-Ended Multiplexer, 1 Func, 16 Channel, CMOS, CDSO24,	Single-Ended Multiplexer, 1 Func, 16 Channel, CMOS, CDSO24,
Maker	Aeroflex	Aeroflex
package instruction	SOP, SOP24,.4	SOP, SOP24,.4
Reach Compliance Code	unknown	unknown
Analog Integrated Circuits - Other Types	SINGLE-ENDED MULTIPLEXER	SINGLE-ENDED MULTIPLEXER
JESD-30 code	R-XDSO-G24	R-XDSO-G24
Number of channels	16	16
Number of functions	1	1
Number of terminals	24	24
Maximum on-state resistance (Ron)	1000 Ω	1000 Ω
Maximum operating temperature	125 °C	125 °C
Minimum operating temperature	-55 °C	-55 °C
Package body material	CERAMIC	CERAMIC
encapsulated code	SOP	SOP
Encapsulate equivalent code	SOP24,.4	SOP24,.4
Package shape	RECTANGULAR	RECTANGULAR
Package form	SMALL OUTLINE	SMALL OUTLINE
power supply	5 V	5 V
Certification status	Not Qualified	Not Qualified
Filter level	38535V;38534K;883S	38535V;38534K;883S
Maximum supply current (Isup)	5 mA	5 mA
Nominal supply voltage (Vsup)	5 V	5 V
surface mount	YES	YES
technology	CMOS	CMOS
Temperature level	MILITARY	MILITARY
Terminal form	GULL WING	GULL WING
Terminal pitch	1.27 mm	1.27 mm
Terminal location	DUAL	DUAL
Base Number Matches	1	1

Recommended Resources

DC 12V to AC 100V inverter power supply circuit design

Mono cassette recorder circuit

Typical application circuit diagram of MAX764,765,766 b

Infrared thermometer preamplifier circuit

One of the self-excited switching regulated power supplies

Amplifier for measuring tiny currents

Why is there a question mark when 1602 clock 1302 displays the time? I hope you all can help me: As shown in the picture. . . . Main function#includesbit DS1302_CE = P1^7; sbit DS1302_CK = P3^5; sbit DS1302_IO = P3^4; bit flag200ms = 0; //200ms timing flag unsigned char T0RH = 0; //High byte of T...; zfw416 Electronics Design Contest

Communication protocol conversion: I want to use a microcontroller to make a protocol converter, because the BMW host computer can only use kma200d protocol, but now there is only kma215 chip, so I need to convert 215 to 200 protocol t...; tl520 Sensor

Overview of Phase-Shifted Full-Bridge ZVZCS DC/DC Converter: Overview of Phase-Shifted Full-Bridge ZVZCS DC/DC Converter Abstract: This paper summarizes 9 types of phase-shifted full-bridge ZVZCS DC/DC converters, briefly introduces the working principles of va...; zbz0529 Analog electronics

Why is it so painful to convert PLC to ARM?: I have been using PLC to implement industrial control before, and recently started to switch to ARM. Why does it feel so painful? A function that was very simple before now requires so much effort to ...; dinglinx1987 Embedded System

Electrician Level 3 Question Bank: Electrician Level 3 Question Bank...; fighting Embedded System

Sharing the process of WEBENCH design + designing LED power supply: I am going to use the software to design an LED power supply.Enter the number of series and parallel connections in the interface, then select the LED selection and the maximum and minimum values of t...; yuanxiaoxiao Analogue and Mixed Signal

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components