The DS1099 is a low-cost, low-power, low-frequency
silicon oscillator that generates two square-wave out-
puts with frequencies between 0.25Hz and 1.048MHz.
Individual output enables allow both outputs to be
enabled/disabled independently. Both outputs are
capable of sinking 16mA, allowing them to directly
interface to light-emitting diodes (LEDs) as well as other
external circuitry. The DS1099 operates over a wide
supply voltage, making it suitable for both 3V and 5V
systems. The device is shipped from the factory custom
programmed and calibrated, ready to be inserted into
the end application.
Contact the factory for custom frequencies or require-
ments.
Features
♦
Low-Cost, Low-Frequency EconOscillator™ with
Dual Outputs
♦
Factory Programmed
♦
Output Frequencies Independently Programmable
from 0.25Hz to 1.048MHz
♦
2.7V to 5.5V Single-Supply Operation
♦
No External Timing Components Required
♦
Independent Output Enables
♦
CMOS/TTL-Compatible Outputs
♦
Oscillator Outputs Capable of Sinking 16mA to
Directly Drive LEDs
♦
Relieves Microprocessor of Periodic Interrupt
♦
Low-Power Consumption
♦
Operating Temperature Range: -40°C to +85°C
♦
±100ppm/°C Temp Drift (MAX)
DS1099
Applications
Flashing LED Status Indicators
Consumer Appliances
Automotive
Servers
Printers
Switch-Mode Power Supplies
Ordering Information
PART
DS1099U-α
0
α
1
*
TEMP RANGE
-40°C to +85°C
PIN-PACKAGE
8 µSOP
*Where
α
0
and
α
1
specify the factory programmed divider set-
tings for OUT0 and OUT1, respectively.
Ordering information is continued on the last page.
EconOscillator is a trademark of Dallas Semiconductor.
Typical Operating Circuit
V
CC
V
CC
Pin Configuration
TOP VIEW
V
CC
OE0
OE1
N.C.
N.C.
OUT1 1
OUT0
OUT1
OUT0
V
CC
2
3
8
7
N.C.
N.C.
OE1
OEO
DS1099
GND
DS1099
6
5
GND 4
OE1 CAN INSTEAD
BE TIED TO V
CC
IF OUT1 IS NOT USED.
OUTPUTS CAPABLE OF
SINKING 16mA
µSOP
______________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Low-Frequency Dual EconOscillator
DS1099
ABSOLUTE MAXIMUM RATINGS
Voltage Range on V
CC
Relative to Ground ...........-0.5V to +6.0V
Voltage Range on
OE0
and
OE1
Relative to Ground.................................-0.5V to (V
CC
+ 0.5V),
not to exceed 6.0V
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-55°C to +125°C
Soldering Temperature .......................................See IPC/JEDEC
J-STD-020A Specification
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
[p=24, null, left][color=rgb(0, 0, 0)][font=simsun, Arial]A gas sensor is a device that converts information such as the composition and concentration of a gas into information that can be used by per...
How can I dynamically generate a date time picker instead of dragging and dropping? I searched online and found that the CDateTimeCtrl class can be used, but how does this class display the time picke...
Thank you very much for the post https://bbs.eeworld.com.cn/thread-465837-1-1.html[/url] by 3[color=#333333][backcolor=rgb(229, 237, 242)][size=12px][url=https://home.eeworld.com.cn/space-uid-598568.h...
The program is very simple, it only needs to use webservice and browse the web. I want to use EVC4 to develop, but it can only make mobile 5.0 programs. Can I ask you, if a mobile 5.0 program needs to...
I have time on Sunday. I start to recharge in the morning, and then I go to do other things.
In the afternoon, at 17:30, the emergency lights started to work. When I went to work at around 6:36 in the...
Industrial Control Electronics
京公网安备 11010802033920号
EEWORLD
