EEWORLDEEWORLDEEWORLD

Part Number

Search

ET03M3D1V3KE

Description
Toggle Switch, SPDT, Latched, 0.02A, 20VDC, Solder Terminal, Plastic, Anti-static Actuator, Through Hole-straight
CategoryMechanical and electronic products    switch   
File Size692KB,7 Pages
ManufacturerITT
Websitehttp://www.ittcannon.com/
Download Datasheet Parametric View All

ET03M3D1V3KE Overview

Toggle Switch, SPDT, Latched, 0.02A, 20VDC, Solder Terminal, Plastic, Anti-static Actuator, Through Hole-straight

ET03M3D1V3KE Parametric

Parameter NameAttribute value
Is it Rohs certified?incompatible
Reach Compliance Codeunknown
ECCN codeEAR99
Actuator typePLASTIC, ANTI-STATIC
body width5.08 mm
body height9.3 mm
Body length or diameter10.57 mm
Contact (AC) maximum rated R load.02A@20VAC
Maximum contact current (AC)0.02 A
Maximum contact current (DC)0.02 A
Contact (DC) maximum rated R load.02A@20VDC
Maximum contact voltage (AC)20 V
Maximum contact voltage (DC)20 V
Electrical life30000 Cycle(s)
JESD-609 codee0
Manufacturer's serial numberET03
Installation featuresTHROUGH HOLE-STRAIGHT
Maximum operating temperature85 °C
Minimum operating temperature-30 °C
sealEPOXY TERMINAL SEALED; IP57
surface mountNO
Switch actionLATCHED
switch functionSPDT
Switch typeTOGGLE SWITCH
Terminal surfaceTin/Lead (Sn/Pb) - with Nickel (Ni) barrier
Termination typeSOLDER
Base Number Matches1
C&K ET Series
Sealed Subminiature Toggle Switches
Features/Benefits
Sealed against solder and cleaning
process contaminants
ESD protection available
Thru-hole and surface mount models
Compact size and small footprint
save PCB space
RoHS compliant models available
Typical Applications
Hand-held telecommunications
Instrumentation
Medical equipment
Models Available
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @
20 V AC or DC max. See page F-32 for additional ratings.
ELECTRICAL LIFE: ETX1 models: 60,000 make-and-break cycles at
full load. All other models: 30,000 cycles.
CONTACT RESISTANCE: Below 20 m
typ. initial @ 2-4
V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109
min.
ELECTROSTATIC DISCHARGE (ESD) RESISTANT OPTION:
M3 & S3 insulating actuator only: 9,000 V DC min. @ sea level,
actuator to terminals. F1 conductive bushing only: Dissipates
up to 20,000 V DC from actuator to ground. M3 & S3 actuator
and F1 bushing options are not recommended for use together.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
DEGREE OF PROTECTION: IP57; Protection against harmful dust
deposit, full-scale voltage protection, temporary immersion.
PACKAGING: Surface mount switches are shipped in tape and reel
packaging, see page G-35 for drawings and reel information.
Materials
CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat
stabilized (UL 94V-0). SA surface mount: High temperature
material, glass filled 4/6 nylon, flame retardant, heat stabilized
(UL 94V-0). F1 conductive bushing option is impregnated
with carbon fibers.
ACTUATOR: M3 & S3 anti-static actuator: Nylon 4/6, black standard
(UL 94V-0). All other actuators: Brass, chrome plated. Internal
o-ring seal standard with all actuators.
SWITCH SUPPORT: Brass, tin plated.
CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See G-35 for additional contact materials.
TERMINAL SEAL: Epoxy.
NOTE:
Any models supplied with Q, B, G, P or R contact material are RoHS compliant
and compatible. For the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
NOTE:
Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages G–31 thru G–35. For additional options not shown in catalog, consult our Customer Service Center. All
models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
Switch Function
ET01
SP, On-None-On
ET02
SPST, Off-None-On
ET03
SP, On-Off-On
ET05
SP, Mom.-Off-Mom.
ET07
SP, On-Off-Mom.
ET08
SP, On-None-Mom.
ET21
DP, On-None-On
ET23
DP, On-Off-On
ET24
DP, On-On-On
ET25
DP, Mom.-Off-Mom.
ET27
DP, On-Off-Mom.
ET28
DP, On-None-Mom.
Actuator
M
.240" high
M3
Plastic, anti-static,
.240" high
S
.400" high
L
.320" high
S1
.540" high
Bushing
D1
.177" High, Unthreaded
F1
.177" high, unthreaded, ESD conductive
Terminations
A
Right angle, PC thru-hole
AV
Vertical right angle, PC thru-hole
C
PC Thru-hole
SA
Right angle, surface mount
SA1
Right angle, surface mount rear-facing
V3
Vertical mount, V-bracket
AV3
Vertical right angle, snap-in, PC thru-hole
V31
Vertical mount, V-bracket, snap-in
Contact Material
W
Wire wrap
B
Gold
K
Gold, tin-lead
P
Gold, matte tin
Q
Silver
G
Gold over silver
L
Gold over silver,
tin-lead
R
Gold over silver,
matte-tin
G
Toggle
Seal
E
Epoxy
Plastic Actuator Color
NONE
No actuator color
2
Black
1
White
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
G–30
www.ittcannon.com
The process of WEBENCH design + indoor LED lighting design under the guidance of WEBENCH (2)
[i=s]This post was last edited by Diguapatch on 2014-8-18 18:27[/i] Ti's online design software webench provides a special design process and method for the increasingly popular LED lighting. This pos...
地瓜patch Analogue and Mixed Signal
There is a problem with the msp430f149 breathing light program
;k++); } // ***************************************************************** void delay_1ms(void) { unsigned int k; for (k=0;k0;i-=1) { CCR1=i; delay_nms(4-(i/500)); //Delay of duty cycle change, adj...
winter_2013 Microcontroller MCU
Help! Cannot generate bin and nb0 files
d 30668 NK.exe .txt a0031000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0...
baozugong Embedded System
IAR_STM8 compilation error please help
I have a question. I have a program that was previously completed in the ST Visual Develop environment. Now I have moved it to the IAR environment and compiled it. The following error is reported: I d...
vongy stm32/stm8
Try bb black
[table=98%] [tr][td][/td][/tr] [tr][td][table=98%] [tr][td][b]Open Source BeagleBone System Installation[/b][/td][/tr] [tr][td] [/td][/tr] [tr][td][float=right] [img]http://gg.eefocus.com/www/delivery...
7leaves DSP and ARM Processors
Bias resistor selection for mic
[i=s] This post was last edited by paulhyde on 2014-9-15 09:14 [/i] Will the audio question this year include mic and amplifier? Find a document on how to select bias resistors for a mic...
leo10202 Electronics Design Contest

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 275  121  1614  322  646  6  3  33  7  14 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号