-
Using Systick timer to achieve delay 1. SysTick timer characteristics The SysTick timer is a 24-bit down counter, that is, when vlue is decremented to 0, an interrupt is triggered and the load va...[Details]
-
UART has three operation modes: polling mode, interrupt mode and DMA mode. Chip: STM32F103C8T6 Application Pin: Output: PA0, PA1 USART1 Configuration interface Add interrupt configuration Add DMA...[Details]
-
1 Introduction Due to the special working environment of coal mine production, the production process is more dangerous and unsafe than the general industry. With the continuous increase in c...[Details]
-
On Sunday, the South Australian government unveiled plans to build the world's largest virtual power plant, which will connect at least 50,000 homes over four years and have a capacity ...[Details]
-
Every era has anxiety that has nowhere to go. Let's follow the embedded editor to learn about the relevant content.
The anxiety of the post-Internet era is that if you don’t revolutionize ...[Details]
-
According to TechRadar, given rumors that
Google
is developing a Pixel Watch
,
the
recently renamed Wear OS
smartwatch
operating system may soon be able to show its full cap...[Details]
-
If you do not use an external crystal on the STM32, the connection method of OSC_IN and OSC_OUT If you use the internal RC oscillator instead of an external crystal, please follow the following metho...[Details]
-
environment: Host: XP Development environment: MDK4.23 MCU:STM32F103CBT6 illustrate: Collect AD through pins PA1 and PA2. Collect AD 10 times for each channel. #include "ad_driver.h" //Global ...[Details]
-
On November 23, Toyota recently released its latest humanoid robot, the T-HR3, which the company said "represents an evolution of the humanoid robot played by previous devices ". This new robot was...[Details]
-
Semiconductor giant Intel has launched the desktop version of the 8th generation Coffee Lake architecture
Core
processor more than a month ago, and its performance is said to be 30% to 40% ...[Details]
-
The clock sources are LFXT1 (low frequency or high frequency), XT2 (high frequency), DCO (digital control). The clock signals are ACLK (auxiliary clock), SMCLK (subsystem clock), MCLK (system clock)...[Details]
-
The chip is EM78P153 ; P64, P65 are connected to the crystal oscillator, the oscillation mode is 4MHz crystal oscillator ; the watchdog is off, the instruction cycle is 2 CLOCK, and P63 is the rese...[Details]
-
Recently, the 2017 Review and 2018 Outlook Seminar of the Photovoltaic Industry was held in Beijing. Sungrow, a powerful inverter technology company, was invited to attend the seminar. With 20 year...[Details]
-
在一个沒有規则性的内容转换中，查表程序是相当有用的，用户可以使用查表程序很快速的得到相关内容的转换。 例：设计一个程序，將如下图所示中的PORT5读到的一个数值，将输入内容做转换，然后输出到PORT6的7段显示器上。 上图中开关关闭，I/O引脚可以得到一个低电位，若是开关开启则I/O引脚可以得到一个高电位。 图 5.2 数码管 八段说明 7段显示器的接线图如上，我們要編一...[Details]
-
The overall operating performance of an electric car depends first on its battery system and motor drive system. The drive system of an electric car is generally composed of three main parts: a contr...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
