BALL GRID ARRAYS
Series 540, 579, 582, 587, 599
For 0,8mm Grid, 1mm Grid and .050”Grid
Male Pin Adapters & Female Sockets
•
BGA adapter/socket systems are a reliable way to make BGAs pluggable. They may also be
used as a high density board-to-board interconnect.
•
The BGA device for a 0,8mm or 1mm grid is soldered to a 9929 adapter (or a 7929 adapter is
soldered to a PCB), then either one can be plugged into a 9942 (0.8mm grid) or 9928
(1mm grid) surface mount socket.
•
The BGA device for a .050” grid is soldered to a 8737/4048 adapter (or a 4098/4054 adapter
is soldered to a PCB), then either one can be plugged into a 8214 surface mount socket.
•
Both socket and adapter have the same footprint as the BGA device.
•
Insertion force is .4N per pin for standard pins 7929/9929, 8737/4098. Tapered EZ-IN pins
4048/4054 reduce insertion force to only .08N, and are recommended for pin counts greater
than 500.
•
Insulator material is FR-4 epoxy having a TCE to match the BGA device and circuit board.
For Electrical,
Mechanical & Enviromental
Data, See pg. 113
XX=Plating Code
See Below
BGA MOUNT TYPE 9929
SERIES 599...429
PCB MOUNT TYPE 7929
SERIES 579...429
.024 DIA.
.018
.047
.123
BGA MOUNT TYPE 8737
SERIES 587...437
.034 DIA.
.024 DIA.
.062
.047
.068
.054
.054
.141
.010 DIA.
.010 DIA.
.018 DIA.
.127
For 0,8mm & 1mm Grid Only
EZ-IN BGA MOUNT TYPE 4048
SERIES 540...448
.034 DIA.
.016 DIA.
For 0,8mm & 1mm Grid Only
STANDARD PCB MOUNT TYPE 4098
SERIES 540...498
.022 DIA.
.023
For .050” Grid Only
EZ-IN PCB MOUNT TYPE 4054
SERIES 540...454
.022 DIA.
.023
.062
.091
.062
.068
.034 DIA.
.062
.091
.034 DIA.
.016 DIA.
.127
.018 DIA.
.127
.127
.013 DIA.
.013 DIA.
For .050” Grid Only
SURFACE MOUNT TYPE 9942
SERIES 599...442
.027 DIA.
For .050” Grid Only
SURFACE MOUNT TYPE 9928
SERIES 599...428
For .050” Grid Only
SURFACE MOUNT TYPE 8214
SERIES 582...414
.043 DIA.
.013
.033 DIA.
.024
.025
.062
.115
.024 DIA.
.062
.090
.024 DIA.
.016 DIA.
.062
.090
.036 DIA.
.140
.022 DIA.
For 0,8mm Grid Only
For 1mm Grid Only
SPECIFY PLATING CODE XX=
For .050” Grid Only
11
10µ” Au
10µ” Au
PLATING CODE XX=
Visit www.mill-max.com/bga
To configure a formal Part Number
10
10µ” Au
Sleeve (Receptacle)
Contact (Internal Clip)
Pin Plating
w w w. m i l l - m a x . c o m
117
516-922-6000