PRODUCT SPECIFICATION
®
1.27mm PITCH SLIM-GRID SHROUDED HEADERS (BOARD TO BOARD)
1.0 SCOPE
This Product Specification covers the 1.27mm centerline (pitch) printed circuit board (PCB)
connector series
2.0 PRODUCT DESCRIPTION
2.1 PRODUCT NAME AND SERIES NUMBER(S)
Product Name
1.27mm Pitch SLIM-GRID
1.27mm Pitch SLIM-GRID
1.27mm Pitch SLIM-GRID
1.27mm Pitch SLIM-GRID
®
®
®
®
Series Number
200989
201022
201173
201021
Vertical SMT Header
Vertical Thru-hole Header
Right Angle SMT Header
Right Angle Thru-hole Header
200989
201022
201021
201173
2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS
See Sales Drawing 2009890024, 2010210024, 2010220024 and 2011730024 for information
on dimensions, materials, platings and markings.
REVISION: ECR/ECN INFORMATION: TITLE:
A2
ECM:
118480
DATE:
2017/06/22
PRODUCT SPECIFICATION
®
1.27mm PITCH SLIM-GRID
SHROUDED HEADERS
CHECKED BY:
SHEET No.
1
of
12
APPROVED BY:
DOCUMENT NUMBER:
CREATED / REVISED BY:
2009890001
SCHEONG
CGOH
KHLIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
PRODUCT SPECIFICATION
2.3 SAFETY AGENCY APPROVALS
UL File Number :
File E29179, Vol 10
CSA File Number :
152514 (LR 19980)
CSA approval meets following standards/test procedures:
a) CSA std. C22.2 No. 182.3-M1987
b) UL-1977
* “C” and “US” mark adjacent to CSA signifies that the product has been evaluated to the applicable
CSA and ANSI/UL standards, for use in Canada and US respectively.
Series 78120, 87933, 200989, 201021, 201022, 201173, rated 4.3A, 125Vac
3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
The following documents form a part of this specification to the extended specified herewith. In the
event of conflict between the requirements of this specification and the product drawing, the
product drawing shall take precedence
Reference Product Specifications
®
781200001
1.27mm Pitch SLIM-GRID Receptacle
4.0 RATINGS
4.1 MAXIMUM VOLTAGE
125 Volts Vac
4.2 MAXIMUM CURRENT
4.3 Amps per pole (with 1 contact powered up)
Current rating is application dependent and each application should be evaluated by the end user for compliance to
specific safety agency requirements. The ratings listed in the chart below are per Molex test method based on a 30° C
maximum temperature rise over ambient temperature and are provided as a guideline. Appropriate de-rating is
required based on circuit size, ambient temperature, copper trace size on the PCB, gross heating from adjacent
modules/components and other factors that influence connector performance.
CIRCUIT SIZE (NUMBER OF CONTACTS POWERED UP)
8*
10*
12*
14
16*
18*
2*
Current
Rating
per
Pole
(Amps,
Max)
4
6*
20*
22*
24
3.60
3.00
2.70
2.50
2.40
2.30
2.20
2.10
2.10
2.00
2.00
1.90
*Extrapolated from test data. Refer to sheet 3 of 12 for more information.
REVISION: ECR/ECN INFORMATION: TITLE:
A2
ECM:
118480
DATE:
2017/06/22
PRODUCT SPECIFICATION
®
1.27mm PITCH SLIM-GRID
SHROUDED HEADERS
CHECKED BY:
SHEET No.
2
of
12
APPROVED BY:
DOCUMENT NUMBER:
CREATED / REVISED BY:
2009890001
SCHEONG
CGOH
KHLIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
PRODUCT SPECIFICATION
4.3 TEMPERATURE
Operating:
- 55°C to + 105°C
Non-operating: - 55°C to + 105°C
5.1 ELECTRICAL REQUIREMENTS
ITEM
DESCRIPTION
TEST CONDITION
Mate connectors: apply a maximum
voltage of
20
mV and a current of
100
mA.
(EIA-364-23)
Note: Wire resistance and traces shall be
removed from the measured value.
Mated & unmount connectors: apply a
voltage of
500
VDC between adjacent
terminals and between terminals to
ground.
(EIA-364-21)
Dielectric
Withstanding
Voltage
Mated & unmount connectors: apply a
voltage of
1000VAC
for
1
minute between
adjacent terminals and between terminals
to ground.
(EIA-364-20)
Mate connectors: measure the
temperature rise of the contact when the
maximum DC rated current is passed.
(EIA-364-70, Method 1)
REVISION: ECR/ECN INFORMATION: TITLE:
REQUIREMENT
1
Contact
Resistance
(LLCR)
30
milliohms
[MAXIMUM]
[initial]
2
Insulation
Resistance
1000
Megohms
[MINIMUM]
3
No breakdown;
Current leakage <
5
mA
4
Temperature
Rise
Temperature rise:
+30°C
[MAXIMUM]
A2
ECM:
118480
DATE:
2017/06/22
PRODUCT SPECIFICATION
®
1.27mm PITCH SLIM-GRID
SHROUDED HEADERS
CHECKED BY:
SHEET No.
3
of
12
APPROVED BY:
DOCUMENT NUMBER:
CREATED / REVISED BY:
2009890001
SCHEONG
CGOH
KHLIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
PRODUCT SPECIFICATION
5.2 MECHANICAL REQUIREMENTS
ITEM
DESCRIPTION
TEST CONDITION
REQUIREMENT
Mate Force
15N
(24ckt)
10N
(4ckt)
[MAXIMUM]
Unmate Force
3.0N
(24ckt)
0.5N
(4ckt)
[MINIMUM]
Appearance: No Damage
5
Connector Mate &
Unmate Force
Mate and unmate connectors at a rate of
25.4 mm/min..
(EIA-364-13D, Method A)
6
Durability
Mate connectors up to
50
cycles at a
maximum rate of
500 ±50 cycles/hr.
(EIA-364-09)
Contact Resistance:
15milliΩ
[MAXIMUM]
[CHANGE FROM INITIAL]
Appearance: No Damage
Contact Resistance:
15milliΩ
[MAXIMUM]
[CHANGE FROM INITIAL]
7
Reseating
Manually mate and unmate the connector
with mating half for
3 cycles
with rate of
5
cycles/min
maximum.
(EIA-364-09)
Axial pullout force on the terminal in the
housing at a rate of
25 ± 6
mm (1
± ¼
inch) per minute.
(EIA-364-29, Method C)
8
Terminal
Retention Force
(Header)
16.0 N
[MINIMUN]
REVISION: ECR/ECN INFORMATION: TITLE:
A2
ECM:
118480
DATE:
2017/06/22
PRODUCT SPECIFICATION
®
1.27mm PITCH SLIM-GRID
SHROUDED HEADERS
CHECKED BY:
SHEET No.
4
of
12
APPROVED BY:
DOCUMENT NUMBER:
CREATED / REVISED BY:
2009890001
SCHEONG
CGOH
KHLIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
PRODUCT SPECIFICATION
5.3 ENVIRONMENTAL REQUIREMENTS
Mate connectors and subject to the
following vibration conditions, for a period
of
2 hours
in each 3 mutually
perpendicular axis.
Amplitude:
1.52mm
(.060 inch) peak to
peak
Test pulse:
half sine
Sweep:
10->55->10 Hz
in
1 minute
Duration:
2 hours
in each x-y-z axis.
(EIA-364-28, Test Condition I)
Appearance: No Damage
15milliohms
[MAXIMUM]
(change from initial)
Discontinuity:
1.0 µs
[maximum]
9
Vibration
Mate connectors and subject to the
following shock conditions, 3 shocks shall
be applied along 3 mutually perpendicular
axis. (total of 18 shocks)
10
Mechanical shock
Peak value:
490
m/s sq. (50G)
Test pulse :
half sine
Duration :
11 ms
in each x-y-z axis
(EIA-364-27B Condition A)
Appearance: No Damage
Contact Resistance:
15milliΩ
[MAXIMUM]
[CHANGE FROM INITIAL]
Discontinuity:
1.0 µs
[maximum]
11
Thermal shock
Mate connectors, expose to 5 cycles of:-
Temperature °c
Duration
(minutes)
-55+0/-5
30
Transfer time from
5
maximum
cold to hot
+105+3/-0
30
Transfer time from
5
maximum
hot to cold
(EIA-364-32G Method A, Condition VII)
Appearance: No Damage
Contact Resistance:
15milliΩ
[MAXIMUM]
[CHANGE FROM INITIAL]
Mate connectors, expose to:-
12
Temperature life
Temperature:
105 ± 2
°c
Duration:
96
hours.
(EIA-364-17, Method A, Condition 4)
Appearance: No Damage
Contact Resistance:
15milliΩ
[MAXIMUM]
[CHANGE FROM INITIAL]
REVISION: ECR/ECN INFORMATION: TITLE:
A2
ECM:
118480
DATE:
2017/06/22
PRODUCT SPECIFICATION
®
1.27mm PITCH SLIM-GRID
SHROUDED HEADERS
CHECKED BY:
SHEET No.
5
of
12
APPROVED BY:
DOCUMENT NUMBER:
CREATED / REVISED BY:
2009890001
SCHEONG
CGOH
KHLIM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
Integrated technical exchanges
京公网安备 11010802033920号
EEWORLD
