Plug & Play™ Universal Std-Loss MTP
®
/MT-
RJ Hybrid Armored Extender Trunk, 62.5 µm
Multimode (OM1)
MTP
®
(pinned) to MT-RJ (pinned), 24 F, 36-in MTP legs and 48-in
MT-RJ legs, pulling grip one side, 100 ft
Plug & Play™ Universal Systems extender trunks are
used to distribute portions, or all, of the fibers in a Plug
& Play Universal systems trunk to other areas in the
infrastructure. For example, a high-fiber-count trunk can
be deployed from a main distribution area (MDA) to a
zone distribution area (ZDA). Lower-fiber-count extender
trunks can then be utilized to distribute fiber from the
ZDAs into cabinets.
Hybrid extender trunks are terminated with MTP
®
Connectors on one end of the trunk and MT-RJ connec-
tors on the other end for applications requiring one end
of the trunk to connect directly into system equipment or
patch panels. Both Plug & Play Universal Systems trunks
and extender trunks are available in hybrid connector
options.
Additional product configurations are available.
Please download the family specification sheet to
view all options.
Features and Benefits
Factory-terminated solutions
Provide consistent quality, ensure system performance
and reduce installation time
Universal-wired modular system components
Enable moves, adds and changes without polarity con-
cerns; provide a simple migration path between 2-fiber
and parallel optics applications
Maximum skew of 0.75 ns
Product is assured to work in parallel optic applications
for Ethernet, Fiber Channel and InfiniBand
Protective pulling grips
Protects both ends of assembly during installation
Standards
Approvals and Listings
Design and Test Criteria
National Electrical Code
®
(NEC
®
) OFCP, CSA FT-6
NFPA 262 (for plenum, riser
and general building appli-
cations)
Product Specification A708624KADBMZ100F_NAFTA_AEN
Page 1 | Revision date 2014-10-01
Plug & Play™ Universal Std-Loss MTP
®
/MT-
RJ Hybrid Armored Extender Trunk, 62.5 µm
Multimode (OM1)
MTP
®
(pinned) to MT-RJ (pinned), 24 F, 36-in MTP legs and 48-in
MT-RJ legs, pulling grip one side, 100 ft
Specifications
General Specifications
Application
Flame Rating
Fiber Category
Cable Assembly Type
Cable Type
Number of Pulling Grips
Data Center LAN/SAN
Plenum (OFCP)
62.5 µm MM (OM1)
Plug & Play™ Extender Trunk
Indoor; ANSI/ICEA S-83-596
1
Temperature Range
Operation
-10 °C to 60 °C (14 °F to 140 °F)
Design - Connector A
Connector Type
Ferrule Material
MTP
®
(pinned)
Composite
Optical Specifications - Connector A
Reflectance, Typical
Insertion Loss, Max.
< -20 dB
0.5 dB
Design - Connector B
Connector Type
Ferrule Material
MT-RJ (pinned)
Composite
Optical Specifications - Connector B
Reflectance, Typical
Insertion Loss, Max.
< -20 dB
0.5 dB
Cable Design
Fiber Count
Outer Jacket Color
Product Specification A708624KADBMZ100F_NAFTA_AEN
Page 2 | Revision date 2014-10-01
24
Orange
Plug & Play™ Universal Std-Loss MTP
®
/MT-
RJ Hybrid Armored Extender Trunk, 62.5 µm
Multimode (OM1)
MTP
®
(pinned) to MT-RJ (pinned), 24 F, 36-in MTP legs and 48-in
MT-RJ legs, pulling grip one side, 100 ft
Mechanical Characteristics Cable
Nominal Outer Diameter
Min. Bend Radius Installation
Min. Bend Radius Operation
Max. Tensile Strength for Installation
Weight
17.3 mm (± 1.5 mm) (0.68 in (± 0.06 in))
173 mm (6.8 in)
260 mm (10.2 in)
660 N
235 kg/km (521 lb/1000 ft)
Optical Characteristics (cabled)
Fiber Compliance
Wavelengths
Maximum Attenuation
Min. Overfilled Launch (OFL) Bandwidth
Minimum Effective Modal Bandwidth (EMB)
Serial 1 Gigabit Ethernet
Serial 10 Gigabit Ethernet
Induced Attenuation @ 15 mm Radius
Skew
IEC 60793-2-10, ITU-G.651.1
850 nm / 1300 nm
3.4 dB/km / 1.0 dB/km
200 MHz*km / 500 MHz*km
220 MHz*km / -
300 m / 550 m
33 m / -
< 1.0 dB (2 turns; 15 mm radius; 850 nm)
< 0.75 ns @ 300 m
Furcation - Connector A
Leg Length
Leg Color
Leg Diameter
Furcation Type - A
914 mm [Shortest Leg = (+76 mm/-0 mm), Others Vary] (36 in
[Shortest Leg = (+3 in/-0 in), Others Vary])
Orange
2.0 mm
PnP Size 1
Furcation - Connector B
Leg Length
Leg Color
Leg Diameter
Furcation Type - B
1,219 mm [Shortest Leg = (+76 mm/-0 mm), Others Vary] (48
in [Shortest Leg = (+3 in/-0 in), Others Vary])
Orange
2.0 mm
PnP Size 1
Product Specification A708624KADBMZ100F_NAFTA_AEN
Page 3 | Revision date 2014-10-01
Plug & Play™ Universal Std-Loss MTP
®
/MT-
RJ Hybrid Armored Extender Trunk, 62.5 µm
Multimode (OM1)
MTP
®
(pinned) to MT-RJ (pinned), 24 F, 36-in MTP legs and 48-in
MT-RJ legs, pulling grip one side, 100 ft
Pulling Grip - Connector A
Pulling Grip - Connector A
Pulling Grip Outer Diameter
Min. Duct Size Diameter
Tensile Strength
Yes
44 mm (1.75 in)
57 mm (2.25 in)
440 N (100 lb)
Pulling Grip - Connector B
Pulling Grip - Connector B
No
Chemical Characteristics
RoHS
Free of hazardous substances according to RoHS 2002/95/
EG
Fiber Specifications
Optical Characteristics (cabled)
Fiber Core Diameter
Fiber Category
Fiber Code
Performance Option Code
Wavelengths
Maximum Attenuation
Serial 1 Gigabit Ethernet
Serial 10 Gigabit Ethernet
Min. Overfilled Launch (OFL) Bandwidth
Minimum Effective Modal Bandwidth (EMB)
62.5 µm
OM1
K
30
850 nm / 1300 nm
3.4 dB/km / 1.0 dB/km
200 m / 500 m
220 m / -
300 MHz*km / 550 MHz*km
33 MHz*km / -
Ordering Information
Part Number
Product Description
Length
Weight
A708624KADBMZ100F
Plug & Play™ Universal Std-Loss MTP
®
/MT-RJ Hybrid
Extender Armored Trunk, 62.5 µm Multimode (OM1), MTP
(pinned) to MT-RJ (pinned), 24 F, 36-in MTP legs and 48-in
MT-RJ legs, pulling grip one side, 100 ft
100 ft (+7.5 ft/-0 ft) (30 m (+2.29 m/-0 m))
62 lb (28 kg)
Product Specification A708624KADBMZ100F_NAFTA_AEN
Page 4 | Revision date 2014-10-01
Plug & Play™ Universal Std-Loss MTP
®
/MT-
RJ Hybrid Armored Extender Trunk, 62.5 µm
Multimode (OM1)
MTP
®
(pinned) to MT-RJ (pinned), 24 F, 36-in MTP legs and 48-in
MT-RJ legs, pulling grip one side, 100 ft
Shipping Information
Units per Delivery
1/1
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm
A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks.
All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. ©
2014 Corning Optical Communications. All rights reserved.
Product Specification A708624KADBMZ100F_NAFTA_AEN
Page 5 | Revision date 2014-10-01
京公网安备 11010802033920号
EEWORLD
