EEWORLDEEWORLDEEWORLD

Part Number

Search

CMZ1601-9ERD6AHFU

Description
DC-DC Regulated Power Supply Module, 1 Output, 168.50 X 111.20 MM, 38.70 MM HEIGHT, METAL, CASE M02, MODULE
CategoryPower/power management    The power supply circuit   
File Size536KB,24 Pages
ManufacturerBel
Websitehttp://www.belfuse.com
Download Datasheet Parametric View All

CMZ1601-9ERD6AHFU Overview

DC-DC Regulated Power Supply Module, 1 Output, 168.50 X 111.20 MM, 38.70 MM HEIGHT, METAL, CASE M02, MODULE

CMZ1601-9ERD6AHFU Parametric

Parameter NameAttribute value
Brand NamePower-One
Is it lead-free?Contains lead
Is it Rohs certified?incompatible
MakerBel
Parts packaging codeMODULE
package instruction,
Manufacturer packaging codeCASE M02
Reach Compliance Codecompliant
ECCN codeEAR99
Analog Integrated Circuits - Other TypesDC-DC REGULATED POWER SUPPLY MODULE
Maximum input voltage140 V
Minimum input voltage28 V
Nominal input voltage60 V
JESD-30 codeR-MXMA-X
JESD-609 codee0
Maximum load regulation0.333%
Number of functions1
Output times1
Maximum operating temperature71 °C
Minimum operating temperature-40 °C
Maximum output voltage26.4 V
Minimum output voltage4 V
Nominal output voltage24 V
Package body materialMETAL
Package shapeRECTANGULAR
Package formMICROELECTRONIC ASSEMBLY
Peak Reflow Temperature (Celsius)NOT SPECIFIED
Certification statusNot Qualified
surface mountNO
Temperature levelOTHER
Terminal surfaceTIN LEAD
Terminal formUNSPECIFIED
Terminal locationUNSPECIFIED
Maximum time at peak reflow temperatureNOT SPECIFIED
Fine-tuning/adjustable outputYES
M-Family
DC-DC Converters <100 W
Rugged Environment
50 W DC-DC (AC-DC) Converters
Class I Equipment
Single output: series AM...LM 1000
Dual output:
series AM...LM 2000
Triple output: series AM...LM 3000
Class II Equipment (double insulation)
Single output: series CMZ/DMZ/LMZ 1000
Dual output:
series CMZ/DMZ/LMZ 2000
Triple output: series CMZ/DMZ/LMZ 3000
• Extremely wide input voltage range suitable for
battery (and AC) operation
• Efficient input filter and built-in surge and transient
suppression circuitry
• 4 kV
rms
input to output electric strength test
• Outputs individually isolated and controlled
• Outputs fully protected against overload
Safety according to IEC 950
LGA
C
M-Family
Table of Contents
........................................... Page
Description .................................................................. 7 - 2
Type Survey ................................................................ 7 - 3
Safety and Installation Instructions ............................. 7 - 4
Functional Description ................................................. 7 - 6
Electrical Input Data .................................................... 7 - 7
Electrical Output Data ................................................. 7 - 9
EMC and Immunity to Input Transients ..................... 7 - 13
Supplementary Data ................................................. 7 - 15
Description of Options ............................................... 7 - 16
Immunity to Environmental Conditions ...................... 7 - 22
Mechanical Data ....................................................... 7 - 24
Type Key and Product Marking ................................. 7 - 25
7.1
Description
The M-family of DC-DC (AC-DC) converters represents a
broad and flexible range of power supplies for use in ad-
vanced industrial electronic systems. Features include high
efficiency, reliability, low output voltage noise and excellent
dynamic response to load/line changes due to individual
regulation of each output.
The converter inputs are protected against surges and tran-
sients occuring at the source lines. An input over- and
undervoltage cut-out circuitry disables the outputs if the in-
put voltage is outside the specified range. Certain types in-
clude an inrush current limitation preventing circuit break-
ers and fuses from being damaged at switch-on.
All outputs are open- and short-circuit proof and are pro-
tected against overvoltages by means of built-in suppres-
sor diodes. The outputs can be inhibited by a logic signal
applied to the connector pin 2 (i). If the inhibit function is not
used pin 2 should be connected with pin 23 to enable the
outputs.
LED indicators display the status of the converter and allow
visual monitoring of the system at any time.
Full input to output, input to case, output to case and output
to output isolation is provided. The modules are designed
and built according to the international safety standard
IEC 950 and have been approved by the safety agencies
LGA (Germany) and UL (USA). The UL Mark for Canada
has been officially recognized be regulatory authorities in
provinces across Canada.
The case design allows operation at nominal load up to
71°C in a free air ambient temperature. If forced cooling is
provided, the ambient temperature may exceed 71
°C
but
the case temperature should remain below 95°C under all
conditions.
A temperature sensor generates an inhibit signal which
disables the outputs if the case temperature
T
C
exceeds the
limit. The outputs are automatically re-enabled when the
temperature drops below the limit.
Various options are available to adapt the converters to in-
dividual applications.
The modules may either be plugged into 19 inch rack sys-
tems according to DIN 41494, or be chassis mounted.
Case: aluminium, black finish, self cooling.
Dimensions: 38.7
×
111.2
×
168.5 mm. Weight: 770 g.
7-2
MELCHER
The Power Partners.
Edition 2/96 - © Melcher AG
Be a great "painter" - abandon carbon paper, rubbing boards, and printers from now on!
After seeing the laser engraving machine on the forum before, I suddenly felt that this thing could be used for drawing, and it could remove a lot of structural support parts to achieve the effect of ...
cardin6 Creative Market
Common coaxial cable types and characteristics
1. Consider transmission attenuation: When the floor is very high and far from the monitoring center, the transmission attenuation problem should be carefully considered. When choosing cables, everyon...
jek9528 Industrial Control Electronics
STM32 learning seventh post, function variable parameter chapter, welcome experts to spray, to guide attach_img
This code is copied from Baidu on the Internet. There are two main problems. The 32-bit compilation is correct, but the 64-bit compilation is wrong. Can you give me some guidance?#define va_list void*...
long521 stm32/stm8
PCB engineer classification basis
Job position: Entry-level PCB engineer Competency requirements: 1. Able to make simple packages, such as DIP10, etc.; 2. Master the basic operation of at least one PCB design software, and be able to ...
yuandayuan6999 PCB Design
EEWORLD website system upgrade announcement
[font=微软雅黑][size=4] Dear EEWORLD netizens: Hello everyone! In order to provide you with better service and improve the user experience of the website, EEWORLD will carry out system maintenance and upg...
EEWORLD社区 Suggestions & Announcements
PIC microcontroller learning and communication in progress
I am a beginner of PIC16F877A microcontroller. I have learned 51 before. Can you please give me some advice? Also, if anyone has the PIC8.05 version of the compiler, please send it to me. Thank you in...
飓风狂飙 Microchip MCU

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 522  821  516  1127  1072  11  17  23  22  34 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号