ET27LF1AVBE1 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Mechanical and electronic products> switch> ET27LF1AVBE1

ET27LF1AVBE1: DescriptionToggle Switch, DPDT, Latched And Momentary, 0.02A, 20VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT; CategoryMechanical and electronic products switch; File Size459KB，7 Pages; ManufacturerITT; Websitehttp://www.ittcannon.com/; Environmental Compliance

Download Datasheet Parametric View All

ET27LF1AVBE1 Overview

Toggle Switch, DPDT, Latched And Momentary, 0.02A, 20VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT

ET27LF1AVBE1 Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Maker	ITT
package instruction	ROHS COMPLIANT
Reach Compliance Code	unknown
ECCN code	EAR99
body width	9.27 mm
body height	8.13 mm
Body length or diameter	10.11 mm
Contact (AC) maximum rated R load	.02A@20VAC
Maximum contact current (AC)	0.02 A
Maximum contact current (DC)	0.02 A
Contact (DC) maximum rated R load	.02A@20VDC
Maximum contact voltage (AC)	20 V
Maximum contact voltage (DC)	20 V
Electrical life	30000 Cycle(s)
JESD-609 code	e4
Manufacturer's serial number	ET
Installation features	THROUGH HOLE-RIGHT ANGLE
Maximum operating temperature	85 °C
Minimum operating temperature	-30 °C
seal	EPOXY TERMINAL SEALED; IP57
surface mount	NO
Switch action	LATCHED AND MOMENTARY
switch function	DPDT
Switch type	TOGGLE SWITCH
Terminal surface	Gold (Au) - with Nickel (Ni) barrier
Termination type	SOLDER

Preview

Download Datasheet

View All

ET Series

Sealed Subminiature Toggle Switches

Features/Benefits

•

Sealed against solder and cleaning

•

process contaminants

ESD protection available

Thru-hole and surface mount models

Compact size and small footprint

save PCB space

RoHS compliant models available

Typical Applications

•

Hand-held telecommunications

•

Instrumentation

•

Medical equipment

Models Available

Specifications

CONTACT RATING: B contact material: 0.4 VA max. @

20 V AC or DC max. See page F-32 for additional ratings.

ELECTRICAL LIFE: ETX1 models: 60,000 make-and-break cycles at

full load. All other models: 30,000 cycles.

CONTACT RESISTANCE: Below 20 m

Ω

typ. initial @ 2-4

V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE: 109

Ω

min.

ELECTROSTATIC DISCHARGE (ESD) RESISTANT OPTION:

M3 & S3 insulating actuator only: 9,000 V DC min. @ sea level,

actuator to terminals. F1 conductive bushing only: Dissipates

up to 20,000 V DC from actuator to ground. M3 & S3 actuator

and F1 bushing options are not recommended for use together.

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

DEGREE OF PROTECTION: IP57; Protection against harmful dust

deposit, full-scale voltage protection, temporary immersion.

PACKAGING: Surface mount switches are shipped in tape and reel

packaging, see page G-35 for drawings and reel information.

Materials

CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat

stabilized (UL 94V-0). SA surface mount: High temperature

material, glass filled 4/6 nylon, flame retardant, heat stabilized

(UL 94V-0). F1 conductive bushing option is impregnated

with carbon fibers.

ACTUATOR: M3 & S3 anti-static actuator: Nylon 4/6, black standard

(UL 94V-0). All other actuators: Brass, chrome plated. Internal

o-ring seal standard with all actuators.

SWITCH SUPPORT: Brass, tin plated.

CONTACTS & TERMINALS: B contact material: Copper alloy,

with gold plate over nickel plate. Q contact material: Copper

alloy, silver plated. See G-35 for additional contact materials.

TERMINAL SEAL: Epoxy.

NOTE:

Any models supplied with Q, B, G, P or R contact material are RoHS compliant

and compatible.

NOTE:

Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and

described on pages G–31 thru G–35. For additional options not shown in catalog, consult our Customer Service Center. All

models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.

Switch Function

ET01

SP, On-None-On

ET02

SPST, Off-None-On

ET03

SP, On-Off-On

ET05

SP, Mom.-Off-Mom.

ET07

SP, On-Off-Mom.

ET08

SP, On-None-Mom.

ET21

DP, On-None-On

ET23

DP, On-Off-On

ET24

DP, On-On-On

ET25

DP, Mom.-Off-Mom.

ET27

DP, On-Off-Mom.

ET28

DP, On-None-Mom.

Actuator

.240" high

Plastic, anti-static,

.240" high

.400" high

.320" high

.540" high

Bushing

.177" High, Unthreaded

.177" high, unthreaded, ESD conductive

Terminations

Right angle, PC thru-hole

Vertical right angle, PC thru-hole

PC Thru-hole

Right angle, surface mount

SA1

Right angle, surface mount rear-facing

Vertical mount, V-bracket

Contact Material

AV3

Vertical right angle, snap-in, PC thru-hole

Gold

V31

Vertical mount, V-bracket, snap-in

Gold, matte tin

Wire wrap

Silver

Silver/matte-tin

Gold over silver

Gold over silver,

matte-tin

Toggle

Seal

Epoxy

Plastic Actuator Color

NONE

No actuator color

Black

White

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

G–30

www.ck-components.com

Recommended Resources

Pulse, triangle wave and sawtooth wave signal generator circuit using 566 02

Slow start 15V power supply circuit diagram

Serial to infrared circuit

555 simple electronic keyboard circuit (1)

Resistor-frequency converter circuit for temperature adjustment

Computer motherboard circuit diagram 815 2_02

Nios II Blink downloader question: I used someone else's Blink program, but when I downloaded it with Flash programmer, it got to this step. I don't know if it was successful, but restarting the FPGA did not work properly. Info: Is Lea...; luooove FPGA/CPLD

Can you tell me about the camera problem under WINCE?: I am currently working on the video display of a camera under WINCE. The input is ITU-R BT656, used on 2450. If the underlying layer provides me with an interface, how should I do it? I have no idea a...; wolf365 Embedded System

Can't enter TI classroom: This interface was not used when I logged in before. After submitting the intermediate exam, this interface appeared. Except for the first text box, I cannot enter any input in other text boxes. What ...; xqzl Microcontroller MCU

AVR microcontroller burning program: When I used ISP to download, the chip could not be erased. I used Zhifeng's software, and then bought a JTAGice downloader, but I couldn't burn it using AVRstudio....; 张彤 Microchip MCU

Reliability Design of Printed Circuit Boards - Decoupling Capacitor Configuration: In a DC power supply circuit, changes in load can cause power supply noise. For example, in a digital circuit, when the circuit switches from one state to another, a large peak current will be generat...; yfee FPGA/CPLD

Regarding the issue of using 12864 LCD screen (half screen) as a pointer clock: I have no idea at all. The limitation is that I have to use 51 series chips, and I only have AT89S52 on hand. If all the possibilities of displaying the pointer on half screen are stored in the on-chi...; autumn Embedded System

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components