The JDSU SN Series fiberoptic switch is GR-1221 qualified and designed for use
in central office network applications. This reliable, miniature optical component
is available as a 1x1 (on/off), 1x2, and 2x2 switch.
Collimated lenses and a moving mirror minimize insertion loss and improve the
repeatability and stability of the switch parameters. The switch itself is directly
mounted on printed circuit boards (PCBs), and is equipped with status contacts
to provide an electrical readout of the switch position. Latching operation ensures
that the switch remains in position following power loss.
On request, JDSU also provides customized modular assemblies that incorporate
taps, wavelength division multiplexers (WDMs), splitters, and other components.
Compliance
• Telcordia GR-1221-CORE and
GR-1073-CORE
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
SN SERIES FIBEROPTIC SWITCH
2
SN Series Dimensions Diagram
1.904 [48.36]
.714 [18.14]
.349 [8.86]
.230 [5.84]
.100 [2.54]
.730 [18.54]
1.855 [47.12]
.125 [3.18]
.135 [3.43]
.105 [2.67]
.405 [10.29]
.505 [12.83]
.29 [7.4]
.50 [12.7]
Pin #12
.000 [.00]
Pin #1
.300 [7.62]
.400 [10.16]
Ø .040 [1.02]
11 PL
Pin #6
(Specifications in inches [mm] unless otherwise noted.)
.167 [4.24]
1.625 [41.28]
.000 [.00]
.100 [2.54]
.200 [5.08]
.400 [10.16]
.500 [12.70]
PCB
NOTES: RECOMMENDED BOARD THICKNESS .063" [1.59]
SWITCH MOUNTING HOLE PATTERN
Specifications
Parameter
Wavelength range
Insertion loss
1
1x1, 1x2
2x2
Return loss
2
Polarization dependent loss
2
Repeatability
Crosstalk
Optical input power (continuous wave)
Switching time
Cycle rate
Power supply
3
Dimensions (W x H x D)
Weight
Operating temperature
Storage temperature
Humidity (non-condensing)
Qualification
Specification
1290 to 1330 and/or 1525 to 1610 nm
0.8 dB
1.0 dB
55 dB
0.1 dB
±0.05 dB
-60 dB
300 mW
9 ms
10 Hz
5 V DC/40 mA ±10%
48.4 x 8.7 x 18.1 mm
14 g
0 to 65 °C, or -5 to 70 °C short term
4
-40 to 85 °C
<85% RH, or 90% RH short term
4
GR-1221-CORE, GR-1073-CORE
1. Insertion loss is specified for the 1290 to 1330 nm and 1520 to 1570 nm wavelength ranges, all polarization states, and does not include connectors. Add 0.3 dB maximum
over operating temperature range. Add 0.1 dB maximum for extended wavelength operation up to 1610 nm.
2. Excluding connectors.
3. A 5 V DC 40 mA pulse of 20 ms duration is recommended.
4. The switch can be operated over the short term from -5 to 70 °C for 96 consecutive hours or less and a total of 15 days or less over a one year period.
SN SERIES FIBEROPTIC SWITCH
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: SN22+10750FA
SN
Code
11
12
22
+1
Configuration
1x1
1x2 (2x1)
2x2
Code
2
7
Fiber Type
9/125/250 µm
1
9/125/900 µm
Code
1
3
5
D
W
Wavelength
1525
to
1610
nm
1290
to
1330
nm
1525
to
1575
nm
1290
to
1330
nm
and
1525
to
1575
nm
1290
to
1330
nm
and 1525
to
1610
nm
Code
NC
FA
FP
LC
SC
SP
SU
MU
Connector Type
No
connector
FC/APC
FC/HPC
LC/PC
SC/HPC
ST/HPC
SC/APC
MU
Code
0
Control Type
Direct
control
Code
0
5
Fiber Length
1.0 m
1.5 m
1. The 250 µm fiber option is only available with the “no connector” option.
I participated in the Renesas smart car competition and designed a tracking smart car. I am currently using the Huisheng mg996r servo connected to the microcontroller. I would like to know how to desi...
I use the capture unit of 2812 to measure the frequency of square wave, but I can't get the correct and stable frequency value. I can enter the interrupt, but the value of f variable changes disorderl...
The problem originated from my recent attempt to make a simple DC motor driver (I had never done this before, and it was my first attempt, so I didn't think there would be much of a problem at first)....
I would like to ask you a question. When the measured medium is gas, the transmitter should be installed above the pressure point. When the measured medium is liquid, the transmitter should be install...
I've been learning about circuit board relays recently, mainly the three models JQC-3F, T73, and JQX-14FF3. If anyone has the production process flow or operating instructions for one of these models,...
PV DC fuses are safety devices used to protect PV panels, inverters, and DC loads. To ensure their safety and reliability, they must be UL248 certified.
Before applying for UL248 certifi...[Details]
There are many different ways of human-computer interaction. The more common ones are listed below:
Mouse interaction: Using a mouse to operate a computer and interact was the most common human...[Details]
Wave soldering is a crucial electronic component soldering technique used in the production of a wide range of electronic devices, from home appliances to computers to avionics. The process is wide...[Details]
Electric vehicles are currently gaining momentum, but this is just a facade. Fuel-powered vehicles remain unchallenged. While electric vehicles boast unique advantages in environmental emissions an...[Details]
Recently,
Xpeng Motors and Xinlian Integrated Circuit jointly announced the mass production of China's first hybrid silicon carbide product.
Designed and developed by Xpeng Motors and joint...[Details]
With the rapid advancement of automation technology, collaboration between robots is no longer just science fiction. Imagine dozens of machines moving goods in a warehouse without interfering with ...[Details]
As the scale and business applications of national e-government networks continue to expand, the data and services transmitted over them are becoming increasingly sensitive and critical. To protect...[Details]
Normally, we determine our location and where we want to go by comparing our surroundings with observation and simple GPS tools. However, this kind of reasoning is very difficult for self-driving c...[Details]
Electric vehicles are powered by electricity, and charging is a device that supplements the vehicle's energy source. It is common to need to recharge the vehicle when driving. But can you charge th...[Details]
The 2025 China International Automotive Testing Exhibition will be held at the Shanghai World Expo Exhibition and Convention Center from August 27 to 29, 2025.
Clacton Seafront, UK, ...[Details]
In daily life, power transformers have different functions and uses due to different usage scenarios. The most common ones can be divided into: control transformers, isolation transformers, rectifi...[Details]
My career has been closely tied to the semiconductor industry. From product management to content marketing, I've provided countless forecasts and predictions across a variety of roles. Whethe...[Details]
Shenzhen Baowei Power Supply high frequency pure sine wave power, communication inverter power supply has two communication interfaces, RS232 and R485 interfaces, their functions and characteristic...[Details]
Tools/Materials
Yitong Chuanglian MODBUS to PROFIBUS Gateway YT-PB-03
Siemens s7-300
This article describes how to configure the YT-PB-03 MODBUS to PROFIBUS gat...[Details]
Speaking of the problem of vehicle spontaneous combustion, whether it is a pure electric vehicle or a fuel vehicle, there will be incidents of spontaneous combustion. For the same spontaneous combu...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
