My board does not have the CPU soldered on it, and the power consumption of the whole board is about 40uA. After soldering the CPU, after entering LPM4, the power consumption of the whole board is abo...
Q: What are the latest improvements to Circuits from the Lab? A:New circuits from the lab include schematics, bill of materials, and layout files.Most new circuits come with evaluation hardware.Linux ...
1 Overview The purpose of this document is to explain the process and precautions of using PADS's PCB design software PowerPCB for PCB design, to provide design specifications for designers in a worki...
Does anyone know which register is used for the data received by the UART in the Laplander 3.1 firmware library? Also, which is the flag bit for entering the middle segment?...
NanoSilicon is mainly engaged in the design of mixed digital and analog and various interface chip IPs, including USB3/PCIe/SATA PHY, MIPI, HDMI, DisplayPort, etc., covering 180nm~16nm mainstream proc...
My machine uses the STM32F101 chip, in which its AD function is used. After testing for several months, I suddenly found that the values read out by AD were all 4095, so I adjusted the frequency of AD...