Optoway
SPB-97120W-1590G
1
***********************************************************************************************************************************************************************
SPB-97120W-1590G
(SC)
(RoHS Compliant)
SPB-97120LW-1590G
(LC)
1590 nm TX / 1510 nm RX , 3.3V / 2.5 Gbps
Digital Diagnostic
Single-Fiber SFP Transceiver
**********************************************************************************************************************************************************************
FEATURES
l
l
l
l
l
l
l
l
l
l
l
l
l
DESCRIPTION
1-Fiber Bi-Directional SFP Optical Transceiver
Simplex
SC
Connector:
SPB-97120W-1590G
Simplex
LC
Connector:
SPB-97120LW-1590G
Tri-rate for OC-48 / STM-16, Gigabit Ethernet
1000BASE & Fibre Channel
SFF-8472 Digital Diagnostic Function
1590 nm DFB LD Transmitter
1510 nm Receiver
Distance Up to 120 km
AC/AC Coupling according to MSA
Single +3.3 V Power Supply
RoHS Compliant
0 to 70
o
C Operation
Class 1 Laser International Safety Standard IEC 60825
Compliant
The SPB-97120W-1590G series is high performance
module for OC-48 / STM-16 and Gigabit Ethernet
1000BASE single fiber communications by using 1590 nm
transmitter and 1510 nm receiver. It is with the SFP 20-pin
connector to allow hot plug capability. Digital diagnostic
functions are available via an I
2
C. The transmitter section
uses a multiple quantum well 1590 nm DFB laser and is a
class 1 laser compliant according to International Safety
Standard IEC 60825. The receiver section is designed to
receive 1510 nm signal. The receiver section uses an
integrated 1510 nm detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
APPLICATIONS
l
WDM OC-48 / STM-16 Links
l
Gigabit Ethernet Interconnect
l
Fibre Channel Links
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
2.5
2.5
Distance
(km)
120
120
TX
(nm)
1590DFB
1590DFB
RX
(nm)
1510
1510
Package
Temp
(
o
C)
0 to 70
0 to 70
TX
Power
(dBm)
4 to 0
4 to 0
RX Sens.
RoHS
(dBm) Compliant
-29
-29
Yes
Yes
SPB-97120W-1590G
SPB-97120LW-1590G
SC SFP with DMI
LC SFP with DMI
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Relative Humidity
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
RH
Vcc
---
Iout
Min
-40
0
0
0
GND
0
Max
85
70
85
3.6
Vcc
30
Units
o
C
o
C
%
V
V
mA
Notes
Non condensing
Recommended Operating Conditions
Parameter
Power Supply Voltage
Power Supply Current
Operating Case Temperature
Data Rate
Symbol
Vcc
I
CC (TX+RX)
Topr
Min
3.13
0
622
Typ
3.3
200
2488
Max
3.47
300
70
2670
Units / Notes
V
mA
o
C
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2008
V1.0
Optoway
Transmitter Specifications (0
o
C < Topr < 70
o
C, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
SPB-97120W-1590G
Units
Notes
2
***********************************************************************************************************************************************************************
Optical
Optical Transmit Power
Po
0
4
dBm
1
Output Center Wavelength
1580
1620
nm
λ
Output Spectrum Width
1
nm
-20 dB width
σ
λ
Side Mode Suppression Ratio
SMSR
30
dB
Extinction Ratio
E
R
8.2
dB
Output Eye
Compliant with Telecordia GR-253-GORE and ITU-T Recommendation G.957
Optical Rise Time
t
r
150
ps
20 % to 80% Values
Optical Fall Time
t
f
150
ps
20 % to 80% Values
Relative Intensity Noise
RIN
-120
dB/Hz
Electrical
Data Input Current
–
Low
I
IL
-350
µA
Data Input Current
–
High
I
IH
350
µA
Differential Input Voltage
V
IH
- V
IL
0.5
2.4
V
Peak-to-Peak
TX Disable Input Voltage
–
Low
T
DIS, L
0
0.5
V
2
TX Disable Input Voltage
–
High
T
DIS, H
2.0
Vcc
V
2
TX Disable Assert Time
T
ASSERT
10
µs
TX Disable Deassert Time
T
DEASSERT
1
ms
TX Fault Output Voltage -- Low
T
FaultL
0
0.5
V
3
TX Fault Output Voltage -- High
T
FaultH
2.0
Vcc+0.3
V
3
Notes: 1. Output power is power coupled into a 9/125
µm
single mode fiber.
2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Receiver Specifications (0
o
C < Topr < 70
o
C, 3.13 V < Vcc < 3.47V)
Parameter
Optical
Sensitivity
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Differential Output Voltage
Output LOS Voltage -- Low
Output LOS Voltage
–
High
Signal Detect Assert Time
Signal Detect Deassert Time
Symbol
---
Pin
Pa
Pd
Min
---
-9
---
-40
1.0
1480
0.6
0
2.0
Typ
---
---
---
---
---
Max
-29
---
-29
---
1520
2.0
0.5
Vcc+0.3
100
300
Units
dBm
dBm
dBm
dBm
dB
nm
V
V
V
µs
µs
Notes
4
Transition: low to high
Transition: high to low
5
V
OH
–
V
OL
V
OL
V
OH
AS
MAX
ANS
MAX
6
6
OFF to ON
ON to OFF
Notes: 4. Minimum sensitivity and saturation levels at BER 1E-10 for a 2
23
-1 PRBS.
5. At least 30 dB optical isolation for the wavelength 1580 to 1620 nm.
6. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2008
V1.0
Optoway
RECOMMENDED CIRCUIT SCHEMATIC
VeeT
Tx_DISABLE
T
x_FAULT
(1,17,20)
3
2
4.7K to 10KΩ
TD +
18
Z=50Ω
TD -
19
Z=50Ω
VccT
16
10nF
1μH
Vcc 3.3V
10μF
10nF
1μH
VccR
15
10nF
10μF
10μF
TD -
TD +
SPB-97120W-1590G
3
***********************************************************************************************************************************************************************
Tx_DISABLE
Tx_FAULT
LD
Driver
100Ω
SerDes
IC
Protocol
IC
RD -
12
Z=50Ω
100Ω
RD -
POST
Amp
RD +
13
Z=50Ω
4.7K to 10KΩ
RD +
depending on SERDES
LOSS OF SINGAL
LOS
VeeR
MOD_DEF(0)
8
(9,10,11,14)
6
5
4
4.7K to 10KΩ
Vcc 3.3V
4.7K to 10KΩ
MODULE DETECT
SCL
SDA
4.7K to 10KΩ
EEPROM
MOD_DEF(1)
MOD_DEF(2)
SFP module
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2008
V1.0
Optoway
CONNECTION DIAGRAM
SPB-97120W-1590G
4
***********************************************************************************************************************************************************************
PIN
1
2
3
4
5
6
7
8
9
10
Signal Name
TX GND
TX Fault
TX Disable
MOD-DFE2
MOD-DEF1
MOD-DEF0
N/C
LOS
RX GND
RX GND
Description
Transmitter Ground
Transmitter Fault Indication
Transmitter Disable (Module disables
on high or open)
Modulation Definition 2
–
Two wires
serial ID Interface
Modulation Definition 1
–
Two wires
serial ID Interface
Modulation Definition 0
–
Ground in
Module
Not Connected
Loss of Signal
Receiver Ground
Receiver Ground
PIN
11
12
13
14
15
16
17
18
19
20
Signal Name
Description
RX GND
Receiver Ground
RX DATA OUT- Inverse Receiver Data Out
RX DATA OUT+ Receiver Data Out
RX GND
Vcc RX
Vcc TX
TX GND
TX DATA IN+
TX DATA IN-
TX GND
Receiver Ground
Receiver Power
–
3.3V±5%
Transmitter Power
–
3.3V±5%
Transmitter Ground
Transmitter Data In
Inverse Transmitter Data In
Transmitter Ground
Module Definition
Module Definition
4
MOD-DEF2
PIN 4
SDA
MOD-DEF1
PIN 5
SCL
MOD-DEF0
PIN 6
LV-TTL Low
Interpretation by Host
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E
2
PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2008
V1.0
Optoway
PACKAGE DIAGRAM
Units in mm
A) SC SFP
SPB-97120W-1590G
5
***********************************************************************************************************************************************************************
B) LC SFP
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2008
V1.0
京公网安备 11010802033920号
EEWORLD
