It is recommended that the temperature of the component does not exceed +85°C under worst
case conditions
Operating Temperature
-40 up to +85 °C
< 40 °C ; < 75 % RH
1
V
Scale - 2:1
Storage Conditions (in original
packaging)
Moisture Sensitivity Level (MSL)
Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently
Product Marking:
WE Surge
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
p/n without "820"
cURus, VDE
Date Code - WWY
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
PROJECTION
METHOD
BeBo
DESCRIPTION
005.002
2019-08-16
DIN ISO 2768-1m
WE-VD Disk Varistor
ORDER CODE
820574211
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
7 mm
eiSos
Valid
1/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Rated Current vs. Voltage:
10000
Pulse Lifetime Derating:
10000
1
2
1000
10
1000
No. of Pulses
Voltage [V]
100
1.000
10.000
100.000
1.000.000
100
10
100
1
10
10
1E-5
1E-4
1E-3
1E-2
1E-1
1E+0
1E+1
1E+2
1E+3
1E+4
100
1000
0.1
10000
Pulse Duration [µs]
Current [A]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PROJECTION
METHOD
BeBo
DESCRIPTION
005.002
2019-08-16
DIN ISO 2768-1m
WE-VD Disk Varistor
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
820574211
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
7 mm
eiSos
Valid
2/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
imax [A]
Packaging Specification - Tape and Reel: [mm]
W1
close to center
C
T
P
T1
W2
H1
H
W2
W1
B
W0
W
detail B
Protective Tape
Sprocket Hole
Cover Tape
Embossment
d
D0
P0
P1
F
packaging is refered to the international standard IEC 60286-3:2013
P
±1,0
12.7
P0
±0,3
12.7
P1
±0,7
3,85
F
+0,5/ -0,2
5
W
+1,0/ -0,5
18
W0
min.
10
W1
+0,75/ -0,5
9
W2
max.
3
H
±0,5
20
H1
max.
29
D0
±0,2
4
d
max.
0.6
T
max.
0.7
T1
max.
1.6
Material
Paper
Packaging Unit
pcs.
1000
A
typ.
340,00
C
min.
30,00
N
max.
89,00
W1
± 2,0
43,00
N
W2
max.
51,00
A
W3
± 3,0
43,00
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PROJECTION
METHOD
BeBo
DESCRIPTION
005.002
2019-08-16
DIN ISO 2768-1m
WE-VD Disk Varistor
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
820574211
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
7 mm
eiSos
Valid
3/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
W
IC
H
IC
L
IC
W
C
L
C
L
IC
(mm)
typ.
350,00
W
IC
(mm)
typ.
350,00
H
IC
(mm)
typ.
107,00
Packaging
Unit
pcs.
2000
Material
Paper
L
C
(mm)
typ.
370,00
W
C
(mm)
typ.
370,00
H
C
(mm)
typ.
575,00
No. of
inner Carton
pcs.
5
Packaging
Unit
pcs.
10000
H
Material
Paper
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PROJECTION
METHOD
BeBo
DESCRIPTION
005.002
2019-08-16
DIN ISO 2768-1m
WE-VD Disk Varistor
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
820574211
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
7 mm
eiSos
Valid
C
4/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Wave Soldering Profile:
t
p
T
p
Classification Wave Soldering Profile:
Profile Feature
Preheat Temperature Min
Preheat Temperature Typical
T
s min
T
s max
t
s
ΔT
T
p
t
p
Pb-Free Assembly
100 °C
130 °C
70 seconds
150 °C max.
250 °C - 260 °C
max. 10 seconds
max. 5 seconds each wave
~ 2 K/ second
~ 3.5 K/ second
~ 5 K/ second
4 minutes
T
s typical
120 °C
Sn-Pb Assembly
100 °C
120 °C
130 °C
70 seconds
150 °C max.
235 °C - 260 °C
max. 10 seconds
max. 5 seconds each wave
~ 2 K/ second
~ 3.5 K/ second
~ 5 K/ second
4 minutes
First Wave
Second Wave
Preheat Temperature Max
Preheat Time t
s
from T
s min
to T
s max
Ramp-up Rate
Peak Temperature
Temperature
Time of actual peak temperature
T
s max
T
s typical
T
s min
Ramp-down Rate, Min
Ramp-down Rate, Typical
Ramp-down Rate, Max
Time 25 °C to 25 °C
refer to EN61760-1:2006
Preheat area
Cool down area
Time
typical temperature procedure
min temperature procedure
max temperature procedure
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PROJECTION
METHOD
BeBo
DESCRIPTION
005.002
2019-08-16
DIN ISO 2768-1m
WE-VD Disk Varistor
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
ORDER CODE
820574211
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
7 mm
eiSos
Valid
5/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
As shown above, click here to apply for freeThe DCM is an isolated, regulated DC-DC converter that operates from an unregulated wide range input to produce an isolated output. With its high frequency ...
[i=s] This post was last edited by jiayouhan2011 on 2014-4-28 13:44 [/i] How can I set 3 channels of MSP430149 PWM wave with the same frequency but different phases and different duty cycles? Currentl...
Nowadays, many families will consider choosing some wall stickers to decorate switch boxes and power sockets when decorating, so that the switch boxes do not look so isolated. However, most of the wal...
Wavelet theory and application : https://training.eeworld.com.cn/course/4236This series mainly explains the basic knowledge of wavelet theory, basic theory of wavelet transform and wavelet algorithm a...
ZTE
The communication embargo incident has impacted the communication industry and sounded the alarm for the semiconductor industry. Let's follow the embedded editor to learn more about the r...[Details]
China Energy Storage Network News:
On April 24, State Grid Corporation of China (hereinafter referred to as "SGCC") and China Southern Power Grid Co., Ltd. (hereinafter referred to as "CSGC")...[Details]
When
artificial intelligence
can help humans take on some work, we always divide the responsibilities of both parties very clearly. When humans work, we rarely see
artificial intelligen...[Details]
This part of the code in the void SystemClock_Config(void) function in the main file generated by stm32cubemx RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; This bug occurs, and the f...[Details]
As many companies listed with
the concept of
touch screen
begin to "transform and upgrade", the official voice of the TP industry is getting smaller and smaller. At the same time, the list o...[Details]
The photovoltaic inverter is the core equipment of the photovoltaic system. Its main function is to convert the direct current generated by the photovoltaic modules into alternating current that meets...[Details]
According to foreign media reports, the 2018 GMC Terrain Denali is equipped with multiple collision detection systems, and a recent test verified the safety of the system. Even when driving in a bu...[Details]
This small program is still the use of timer, which is relatively simple. The specific parts are noted in the comments, please refer to the comments. /*********************************************...[Details]
This is also a routine in the development board, with explanations of the key points. The program is as follows: /********************************************************* Program notes: First...[Details]
1. FSMC Brief FSMC, the Flexible Static Storage Controller, is capable of interfacing with synchronous or asynchronous memories and 16-bit PC memory cards. The FSMC interface of STM32 s...[Details]
Note: This STM32 microcontroller is the STM32F103 series. The ADC of Stm32 has DMA function. This is beyond doubt and is what we use most! However, if we want to sample a signal (such as a pulse sign...[Details]
This example sets up a button to adjust the square wave of different frequencies (multiples of 100) from 100-1000hz. In addition, serial port communication is added, and the corresponding frequency c...[Details]
Mixed reality (augmented and virtual reality) is the next computing frontier after the PC in the 1970s, the web in the 1990s, and mobile platforms in the 21st century.
MR
is the most unique...[Details]
For complex calculations, the speed of the microcontroller is too slow. The best way is to manually calculate all the results in advance, store them in ROM in sequence, and then directly check the re...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD
