The Simplex MFM Fibre Optic range has been specifically designed to operate in Harsh Environments.
The rugged, anti-vibration, corrosion resistant design ensures high environmental and optical
performance in a variety of applications in the air, on land, and above / below sea.
Key Features are:
•
•
•
•
•
•
•
•
Ceramic PC ferrule and alignment sleeve providing optimum performance for
Multimode and Singlemode
Lightweight, minimal panel footprint
Anti-vibration coupling mechanism
Keyed shells and ferrules for optimum repeatability.
Environmentally sealed
Keyway polarisation.
RFI Receptacle gasket
Manufactured in ARCAP for corrosion resistance.
Amphenol
MFM Series – Singleway Fibre Optic
Technical Information
MFM Series – Singleway Fibre Optic
Performance
Optical
Attenuation
Repeatability
Fibre types
Cable types
Typically 0.25 with 62.5/125 cable
<0.1dB
9/125 50/125 62.5/125
100/140 200/280
-001 50/125 or 62.5/125 2.75mm OD
-002 50/125 or 62.5/125 6.2mm OD
-003 50/125 or 62.5/125 2.75mm OD
-004 200/280 2.5mm OD EFA Spec
-005 100/140 1.6mm OD
-006 9/125 2.75mm OD
-007 8/125 6.mm2 OD
-008 50/125 or 62.5/125 2.75mm TJ
-017 50/125 or 62.5/125 5.4mm OD
-039 50/125 or 62.5/125 1.6mm OD
-054 50/125 or 62.5/125 1.8mm OD
Many other cable types are available - contact factory for details
Termination method
Environmental
Temperature range
Temperature Endurance
Gunfire Vibration
Shock
Salt Mist
Sand & Dust
Humidity
Note: Tests based on -001 variant
-65
º
C to +155
º
C
1000hrs @ 150
ºC
as per EN2591 Test FC1 C1 Method B
Ruggedised
Ruggedised
Loose Tube
Ruggedised
Ruggedised
Ruggedised
Ruggedised
Santaprene boot
-7 Crimp ferrule and
heatshrink
Ruggedised
Ruggedised
Epoxy/polish
As per pr EN2519 Test D3 Method A
As per EN2591 Test FD2 D2 Method A
500hrs as per EN2591 Test FC7 C7
As per EN2591 Test C8
95% RH for 6hrs as per EN2591 C21
Mechanical
Durability
Materials
>500 matings
Shell
Ferrule
Alignment Sleeve
‘O' ring (seals)
Boot
ARCAP
PC Zirconia ceramic
Zirconia ceramic
Silicone
Silicone
Amphenol
MFM Series – Singleway Fibre Optic
Part Number Information
MFMXXEX
Series
00 Square Flange Receptacle
01 Free Receptacle
06 Plug
07 Jam Nut Receptacle
20 2-Hole Fixing Receptacle
-
XXX
Cable Variant
See Previous Page
Orientation
N, A, B, C, D, E, U
Connector Sub-Assembly
MFMXX
Series
21 2-Hole Fixing Receptacle
29 Square Flange Receptacle
39 Plug
69 Jam Nut Receptacle
79 Free Receptacle
-
EX
Orientation
N, A, B, C, D, E, U
Ferrule Sub-Assembly
MFMXX
Series
09 All Receptacles
19 Plug
-
XXX
Cable Variant
See previous page
Protective Caps
960-164-1000
960-164-1007
960-194-1000
Receptacle
Receptacle
Plug
Small 3.7mm Eyelet
Large 14.8mm Eyelet
Large 11.5mm Eyelet
Termination tools and Consumables
Basic termination kit
Add on kit
Consumable pack (50 terminations approximately)
Torque Fixture
927 - 100 - 3000
927 - 100 - 3500
927 - 100 - 6000
927-1174
Other items of tooling may be purchased separately, please contact your Distributor for details
Torque Settings
MFM Plug
MFM Receptacle (All)
MFM Jam Nut Receptacle
Rear Nut
Ferrule Assembly
Panel Nut
15 lbf/in
15 lbf/in
33 lbf/in
Notice: Products are sold subject to Amphenol’s conditions of sale (“the standard conditions.”) All specifications and statements contained herein are believed to be correct at
the time of printing but no representation or warranty, express or implied, is given as to any specification or statement contained herein. Product specifications including
performance characteristics are typical only and subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety measures
are indicated or that other measures may not be required. No representation or warranty, express or implied, is given that any use of products (including any stated or suggested
use) does not infringe any patent, registered design or other third party rights and no stated or suggested use of products can be taken to recommend any such infringement.
[i=s]This post was last edited by paulhyde on 2014-9-15 09:03[/i] The first Grand Prix received a good response, and Beijing Times Minxin Technology Co., Ltd. will continue to fund the second competit...
Teacher EEWORLD:I refer to TI's documents and use MCBSP to configure a standard serial port, which is to receive a frame header and 8 bits of data. I can receive the data completely by querying. After...
Abstract: The current-doubling synchronous rectification topology has been widely used in low-voltage and high-current converters. Its working principle is analyzed and explained in detail, and the co...
[font=微软雅黑][size=3] [size=4]The haze has been particularly severe in recent days, and today it is even closer to the extreme value of the measurable range:cold: The mobile phone display has exceeded t...
The TMS320C5402 has a total of 192K bytes of addressable storage space. This 192K bytes of storage space is divided into three independent selectable spaces: (1) 64K bytes of program storage space; (2...
The code in the attachment is the MSP430x11x1, MSP430F21x1 sample code provided by TI, which can be used as the most reliable code reference in the use of MSP430[[i] This post was last edited by wstt ...
Nios II is a configurable 16-/32-bit RISC processor. Combined with a rich set of peripheral-specific instructions and hardware acceleration units, it provides a highly flexible and powerful SOPC sy...[Details]
1. Project Overview
1.1 Introduction
Currently, most music files are saved in MP3 format, a lossy audio compression format that cannot perfectly reproduce the original music. With the exp...[Details]
In June 2014, the Ministry of Industry and Information Technology issued 4G FD-LTE licenses to China Unicom and China Telecom. Together with the 4G TD-LTE licenses issued to China Mobile, China Uni...[Details]
introduction
The concept of the smart home is gradually developing and gaining market acceptance. We believe its ultimate form lies in the interconnection of all home appliances through open i...[Details]
Laird Thermal Systems has introduced the HiTemp ET series Peltier cooler modules, which can operate at high temperatures and provide on-site cooling for sensitive electronic devices.
Dig...[Details]
Methods of DC motor speed regulation:
1. The voltage regulator can be used to change the input voltage and speed directly, which is often used for large kilowatt-level motors.
2. Thyristo...[Details]
Wearable technology is taking off, with applications evolving rapidly, from smartwatches to fitness trackers and even smart wigs! Bluetooth Smart is at the center of this revolution. This is the se...[Details]
Analog Devices held a third-quarter fiscal 2025 earnings conference call. Vincent T. Roche, CEO and Chairman of the Board, and Richard C. Puccio, Executive Vice President and Chief Financial Office...[Details]
introduction
As core electronic components used in vastly different fields, automotive-grade chips and mobile/consumer-grade chips exhibit significant differences in their...[Details]
Most cameras on the market use chips manufactured by Japanese companies like Sony, Sharp, Panasonic, and LG. South Korea now has the capability to produce chips, but the quality is somewhat inferio...[Details]
Hair dryer structure and working principle: It is mainly used for drying and shaping hair, but it can also be used for local drying, heating and treatment in laboratories, physiotherapy rooms, ind...[Details]
introduction
A common voltage regulator is a three-terminal one. Its function is to step down the voltage and stabilize it at a fixed output value. Voltage regulators are commonly available in...[Details]
I believe everyone has heard of memory. If your computer is slow, your experts may recommend upgrading it to a larger capacity. But what exactly is computer memory used for? Why does memory capacit...[Details]
As the power density of modern electronic systems continues to increase, effective thermal management has become critical to ensuring system performance, reliability, and longevity—especially in hi...[Details]
The automotive driveshaft is a crucial connecting component in the automotive mechanical system. It is a circular component that allows for connection or assembly, as well as movement and rotation....[Details]