74AUP1G374 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > 74AUP1G374

Preview

74AUP1G374: DescriptionLow-power D-type flip-flop; positive-edge trigger; 3-state; File Size85KB，20 Pages; ManufacturerNXP; Websitehttps://www.nxp.com

Download Datasheet Compare View All

74AUP1G374 Overview

Low-power D-type flip-flop; positive-edge trigger; 3-state

Preview

Download Datasheet

View All

74AUP1G374

Low-power D-type ﬂip-ﬂop; positive-edge trigger; 3-state

Rev. 04 — 26 June 2009

Product data sheet

1. General description

The 74AUP1G374 provides the single D-type ﬂip-ﬂop with 3-state output. The ﬂip-ﬂop will

store the state of data input (D) that meet the set-up and hold times requirements on the

LOW-to-HIGH CP transition. When pin OE is LOW, the contents of the ﬂip-ﬂop is available

at the (Q) output. When pin OE is HIGH, the output goes to the high-impedance

OFF-state. Operation of input pin OE does not affect the state of the ﬂip-ﬂop.

Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall

times across the entire V

range from 0.8 V to 3.6 V. This device ensures a very low

static and dynamic power consumption across the entire V

range from 0.8 V to 3.6 V.

This device is fully speciﬁed for partial power-down applications using I

OFF

The I

OFF

circuitry disables the output, preventing the damaging backﬂow current through

the device when it is powered down.

2. Features

Wide supply voltage range from 0.8 V to 3.6 V

High noise immunity

Complies with JEDEC standards:

JESD8-12 (0.8 V to 1.3 V)

JESD8-11 (0.9 V to 1.65 V)

JESD8-7 (1.2 V to 1.95 V)

JESD8-5 (1.8 V to 2.7 V)

JESD8-B (2.7 V to 3.6 V)

ESD protection:

HBM JESD22-A114E exceeds 5000 V

MM JESD22-A115-A exceeds 200 V

CDM JESD22-C101C exceeds 1000 V

Low static power consumption; I

= 0.9

µA

(maximum)

Latch-up performance exceeds 100 mA per JESD 78 Class II

Inputs accept voltages up to 3.6 V

Low noise overshoot and undershoot < 10 % of V

OFF

circuitry provides partial Power-down mode operation

Multiple package options

Speciﬁed from

−40 °C

to +85

°C

and

−40 °C

to +125

°C

74AUP1G374 Related Products

	74AUP1G374	74AUP1G374GF	74AUP1G374GW	74AUP1G374GM
Description	Low-power D-type flip-flop; positive-edge trigger; 3-state	Low-power D-type flip-flop; positive-edge trigger; 3-state	Low-power D-type flip-flop; positive-edge trigger; 3-state	Low-power D-type flip-flop; positive-edge trigger; 3-state
Is it lead-free?	-	Lead free	Lead free	Lead free
Is it Rohs certified?	-	conform to	conform to	conform to
Parts packaging code	-	SON	SOT-363	SON
package instruction	-	1 X 1 MM, 0.50 MM HEIGHT, PLASTIC, SOT-891, SON-6	PLASTIC, SOT-363, SC-88, SMT-6	1 X 1.45 MM, 0.50 MM HEIGHT, PLASTIC, MO-252, SOT-886, SON-6
Contacts	-	6	6	6
Reach Compliance Code	-	compli	compli	compli
series	-	AUP/ULP/V	AUP/ULP/V	AUP/ULP/V
JESD-30 code	-	S-PDSO-N6	R-PDSO-G6	R-PDSO-N6
JESD-609 code	-	e3	e3	e3
length	-	1 mm	2 mm	1.45 mm
Load capacitance (CL)	-	30 pF	30 pF	30 pF
Logic integrated circuit type	-	D FLIP-FLOP	D FLIP-FLOP	D FLIP-FLOP
Maximum Frequency@Nom-Su	-	70000000 Hz	70000000 Hz	70000000 Hz
MaximumI(ol)	-	0.0017 A	0.0017 A	0.0017 A
Humidity sensitivity level	-	1	1	1
Number of digits	-	1	1	1
Number of functions	-	1	1	1
Number of terminals	-	6	6	6
Maximum operating temperature	-	125 °C	125 °C	125 °C
Minimum operating temperature	-	-40 °C	-40 °C	-40 °C
Output characteristics	-	3-STATE	3-STATE	3-STATE
Output polarity	-	TRUE	TRUE	TRUE
Package body material	-	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY
encapsulated code	-	VSON	TSSOP	VSON
Encapsulate equivalent code	-	SOLCC6,.04,14	TSSOP6,.08	SOLCC6,.04,20
Package shape	-	SQUARE	RECTANGULAR	RECTANGULAR
Package form	-	SMALL OUTLINE, VERY THIN PROFILE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SMALL OUTLINE, VERY THIN PROFILE
method of packing	-	TAPE AND REEL	TAPE AND REEL	TAPE AND REEL
Peak Reflow Temperature (Celsius)	-	260	260	260
power supply	-	1.2/3.3 V	1.2/3.3 V	1.2/3.3 V
Prop。Delay @ Nom-Su	-	21.6 ns	21.6 ns	21.6 ns
propagation delay (tpd)	-	21.6 ns	21.6 ns	21.6 ns
Certification status	-	Not Qualified	Not Qualified	Not Qualified
Maximum seat height	-	0.5 mm	1.1 mm	0.5 mm
Maximum supply voltage (Vsup)	-	3.6 V	3.6 V	3.6 V
Minimum supply voltage (Vsup)	-	0.8 V	0.8 V	0.8 V
Nominal supply voltage (Vsup)	-	1.1 V	1.1 V	1.1 V
surface mount	-	YES	YES	YES
technology	-	CMOS	CMOS	CMOS
Temperature level	-	AUTOMOTIVE	AUTOMOTIVE	AUTOMOTIVE
Terminal surface	-	Tin (Sn)	Tin (Sn)	Tin (Sn)
Terminal form	-	NO LEAD	GULL WING	NO LEAD
Terminal pitch	-	0.35 mm	0.65 mm	0.5 mm
Terminal location	-	DUAL	DUAL	DUAL
Maximum time at peak reflow temperature	-	30	30	30
Trigger type	-	POSITIVE EDGE	POSITIVE EDGE	POSITIVE EDGE
width	-	1 mm	1.25 mm	1 mm
minfmax	-	360 MHz	360 MHz	360 MHz

Recommended Resources

Bookshelf active speaker 01

Light, sound and touch three-control stair delay switch circuit

LA4500 power amplifier circuit diagram

Circuit diagram of adding four one-touch dial memory keys to the telephone

Clever use of LM386 as music lantern controller circuit diagram

CMOS system power interface-AC switch circuit diagram

There was an error installing protel99, I hate it: I use protel99se under Thunder, and other people can use it, but my computer can't. After setup, it gets stuck after entering 3 grids. After waiting for a long time, the server fails to run. I checked...; zyh215 PCB Design

STM32F013 AC signal acquisition: 1. STM32F103RCT6 12-bit ADC; 2. ADC is configured with 4 channels and one ADC module, scanning is non-continuous, software is started, and DMA is triggered; 3. Input AC voltage signal 50HZ 1V, bias vo...; 胡贤峰 stm32/stm8

Can someone please teach me how to read the PLC program?: Can someone please teach me how to read the PLC program? I am a layman... I hope the experts can give me some advice and send me any information..............Thank you!!! wj2008hf@163.com QQ:215127089...; wjhf TI Technology Forum

Pengpaiwei PT32L033 series overview and features: 1. Overview of the Pengpaiwei PT32L033 series PT32L033 is a 32 -bit high-performance MCU based on the Cortex-M0 core , supporting an operating voltage of 1.8~3.6V and an operating temperature of -40~+...; 虹芯侠客 51mcu

SIM card reading and writing problem?: Has anyone made a sim card read/write driver ? Please give me an example, thanks. I also have a question : when sending a select command to a sim card, the following data is sent : 0xA0, 0xA4, 0x00, 0...; dianzijie5 Embedded System

Weird tricks to deal with text message scammers~~~~: I have always been depressed. I have never received any text messages from scammers, so I always feel discriminated against. Today, I finally received a text message from a scammer. It is the most pop...; huchuan987 Talking

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components