EEWORLDEEWORLDEEWORLD

Part Number

Search

PH1-NI2FA4162

Description
Transponder, FC/UPC Connector,
CategoryWireless rf/communication    Optical fiber   
File Size240KB,6 Pages
ManufacturerJDS Uniphase Corporation ( VIAVI )
Websitehttp://www.jdsu.com/index.html
Download Datasheet Parametric View All

PH1-NI2FA4162 Overview

Transponder, FC/UPC Connector,

PH1-NI2FA4162 Parametric

Parameter NameAttribute value
MakerJDS Uniphase Corporation ( VIAVI )
Reach Compliance Codeunknown
Other featuresIT ALSO OPERATE FROM 1280NM TO 1600NM
body width56.1 mm
body height13.2 mm
Body length or diameter76.5 mm
Communication standardsGR-253, OC-192, SONET
Connection TypeFC/UPC CONNECTOR
Fiber optic equipment typesTRANSCEIVER, TRANSPONDER
Nominal operating wavelength1560 nm
Nominal optical power output1.122 mW
minimum return loss-27 dB
COMMUNICATIONS MODULES & SUBSYSTEMS
10 Gb/s TDM/DWDM 300 Pin SFF MSA SR2/IR2/LR2 Transponder
PH1 Series
Key Features
• Three configurations supporting SR2/IR2/LR2 applications
• Supports dense wavelength division multiplexing
(DWDM) applications (without wavelocker)
• Microprocessor controls to support I2C
• Integrated 16:1/1:16 mux/demux
• Small form factor package (2.2" x 3.0" x 0.53") for high
density applications
• Low power consumption: 4.8 W typical, 6.8 W maximum
for TDM applications
• 70 °C maximum operating temperature
• High sensitivity PIN or APD receivers
• SONET, FEC, Ethernet and Multirate Capable Versions
• Forward, counter and line timing clocking modes
Applications
Telecommunications
Metropolitan Area Networks
Subscriber loop
Intra-office SONET/SDH
High bit-rate data communications
JDSU 10 Gb/s PH1 Series transponders are intended for 1550 nm system
applications with reaches of up to 80 km. The series includes three different
transponders for SR2 (25 km), IR2 (40 km), and LR2 (80 km) TDM or DWDM
applications. Each transponder accepts 16 bits of parallel digital data and converts
it to a 10 Gb/s NRZ modulated optical signal. It also accepts a 10 Gb/s NRZ
modulated optical signal and converts it into 16 bit wide parallel digital data.
The PH1 series offers low DC power dissipation and is available in either a small
form factor package (2.2 x 3 x 0.53 inches) or in a larger footprint (3.5 x 4.5 x 0.53
inches) package, depending on system thermal performance requirements. The
transmit design uses an Electro-Absorptive Modulated Laser (EML) which,
depending on the configuration, produces an average output power of between
-4 dBm to 2 dBm (EOL). A PIN (-17 dBm typical sensitivity) or APD (-24 dBm
typical sensitivity) receiver is available, based on system configurations.
JDSU PH1 Series transponders are designed to support the following data rates:
9.953 Gb/s (SONET), 10.3125 Gb/s (Ethernet), 10.664 Gb/s (FEC Encoded),
10.709 Gb/s FEC, or 11.09 Gb/s EFEC. They meet all applicable SONET/SDH standards.
Compliance
• Telcordia GR-253-Core
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
How to display floating point numbers from the serial port of PIC microcontroller?
I want to output the floating point numbers obtained from ADC to a computer through the serial port. The PIC microcontroller is similar to the 51 microcontroller, which does not send data byte by byte...
tiantangii Microchip MCU
EEWORLD University----UCD3138 Digital PWM (DPWM) Module
UCD3138 Digital PWM (DPWM) Module : https://training.eeworld.com.cn/course/5057...
hi5 Power technology
There are more spam posts. Is it possible that the forum user’s account has been infected?
There are so many posts like this on the weekend. I suggest you delete them as soon as possible....
chen8710 Suggestions & Announcements
Talented, Power Engineer
[align=left]Power Engineer:[/align][align=left]Job Responsibilities: 1. Assist IC design engineers to develop product evaluation demo boards 2. Write datasheet, design guide, application note, product...
yilanLED Recruitment
Hardware JPEG decoding in 4412
According to the spec, 4412 supports hardware encoding and decoding, but after searching, it seems that there is no place to use its interface (defined in libhwjpeg/jpeg_hal_unit.c), and most of them ...
dance Embedded System
Ask about EBOOT and VIVI bootloader
I would like to ask the experts: There are two ways to start the kernel in WINCE: bootloader (vivi) and eboot (built-in BSP). Now I want to upgrade from WINCE42 to wince50, but I don’t know much about...
qiquanwei225017 Embedded System

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 2194  891  765  1781  2457  45  18  16  36  50 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号