Q-SERIES 12mmØ Panel Mounting LED Indicator
Q-SERIES Ø6mm Panel Mounting LED Indicator
Product Specification
Distinctive Features and Specifications
•
•
•
•
•
•
•
•
12mm panel mounting LED indicator
8mm coloured diffused epoxy lens or 8mm water clear super bright LEDs
Bright chrome, black chrome or satin grey bezel finish
Prominent bezel style
2VDC – 220VAC
(2.8 x 0.8) terminals, pins or (200mm long) wire terminations
IP67 sealing option (EN60529)
Supplied with fixing nut and spring washer
Ø 12,00 ±0,1
PANEL CUTOUT
NB: UL Recognised Component
TECHNICAL SPECIFICATIONS
Switch Voltage
2VDC (No Resistor)
12VDC
24VDC
28VDC
110VAC
230VAC
Intensity (Typical) at |op Standard
HE Red
Green
Yellow
Blue
White
Bi-colour (Typical) (Red/Green)
Operating Voltage Vop
(Min to Max)
1.8 to 2.5VDC
10.8 to 13.2VDC
21.6 to 26.4VDC
25.2 to 30.8VDC
99 to 121VAC
207 to 253VAC
Operating Current |op
(Typical All Types)
20mA
20mA
20mA
20mA
6mA
3mA
Prominent
Forward Voltage
(all voltages)
100mcd
1.9V
50mcd
2.2V
50mcd
2.1V
500mcd
3.3V
350mcd
3.3V
80/50mcd
2.0V/2.2V
Bi-colour - The colour is changed by reversing the polarity of the supply voltage.
Tri-colour versions are available upon request, please consult Apem.
Prominent
Forward Voltage
(all voltages)
2,700mcd
1.9V
4,200mcd
3.2V
1,400mcd
2.1V
1,500mcd
3.6V
550mcd
3.3V
Luminous intensity will be reduced with lower operating current.
Super Bright
HE Red
Green
Yellow
Blue
White
Max Reverse Voltage:
5V
Viewing Angle:
60°
Life Expectancy:
100,000 hours
Operating Temperature Range:
–40 to +85°C
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
www.apem.com
7
Q-SERIES 12mmØ Panel Mounting LED Indicator
Order Overview
STANDARD OPTIONS
The Q12 Series is available with a range of standard options, to specify your LED, simply choose one option from each column.
An example is shown below.
Q
SERIES
Q
12
MOUNTING
HOLE
12 = Ø12mm
P
BEZEL
STYLE
P = Prominent
1
TERMINALS
1 = Solder Lug/
Fastons
(2.0 x 0.8)
2 = Pins
3 = Wires
6 = Short body
Pins
7 = Short body
Wires
B
BEZEL FINISH
C = Bright Chrome
B = Black Chrome
G = Satin Grey
XX
TYPE OF
ILLUMINATION
XX = Fixed Light
KK = Flashing Light
(only up to 28VDC)
YY = Bi-colour
ZZ = Tri-colour
G
LED COLOUR
R = Red
G = Green
Y = Yellow
B = Blue
W = White
12
VOLTAGE
02 = 2VDC
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
E
SEALING
(Blank) = Unsealed
E = IP67
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
28 = 28VDC
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
Example Q12P1BXXG12E
Ø12mm, prominent bezel, solder lug terminals,
black chrome finish, fixed light,
green, 12volt DC LED, IP67 Panel Seal
SW = Super Bright White
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 24AWG, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
• For LEDs with alternate voltage consult APEM
• Bi-colour LEDs, by connecting the gold Faston (+) one colour is produced,
by reversing the supply voltage another colour is produced – Bi-colours are available up to 28VDC
• Take care when soldering to the Faston terminals
• Max voltage for pins and wires is 28V
• Maximum panel thickness 7mm
• For behind panel epoxy sealed options please consult APEM
• Tri-colours are only available behind panel epoxy sealed with wires or pins
• 110VAC and 220VAC only available with solder lug/Faston terminals
• We recommend using Superbright LEDs for use at 220VAC
• For resistorless versions (02) please pay attention to the forward voltage
www.apem.com
9
Analog electronics
京公网安备 11010802033920号
EEWORLD
