Hey guys, I use AT command to dial in HyperTerminal, the configuration is as follows: AT+CGCLASS="B" OK AT+CGDCONT=1,"IP","CMNET" OK AT+CGATT=1 OK AT+CGACT=1,1 OK AT+CGPADDR=1 +CGPADDR: 1,"010.206.227...
[i=s]This post was last edited by Shi Yu on 2017-4-1 14:15[/i] [b][color=#5E7384]This content was originally created by EEWORLD forum user [size=3]Shi Yu[/size]. If you need to reprint or use it for c...
[size=12px] Fresh graduates should not work on consumer electronics hardware. Because if you want to change careers in the future, people won’t give you a chance, and your salary won’t go up. If you l...
Abstract: The electromagnetic compatibility (EMC) design of monolithic switching power supply is introduced, including the analysis of electromagnetic interference waveform and circuit model, as well ...
The scalable hardware architecture of the DesignWare ARC EV6x embedded vision processor is used to optimize its algorithm migration and accelerate software. The architecture includes up to four 512-bi...
Abstract: The full digital phase-locked loop implemented in FPGA is very widely used. This paper improves the integrated digital phase-locked loop 74297, designs a phase-locked state detection circuit...