3M
™
DIN R-Form Plug
.100” Inverse Mount, Vertical, Solder Tail or Press-Fit Termination
DIN 41612 Series
• Early mate late break (EMLB) grounding contacts for
hot swapping
• Select load capability
• Expanded pin counts
• Optional press-fit or solder tail termination
• Optional retention clips
• Mates with R-form and C-form sockets
• See Regulatory Information Appendix (RIA) for
chemical compliance information
Date Modified: February 20, 2008
TS-1133-C
Sheet 1 of 4
Physical
Insulation:
Material: Glass Filled Polyester (PCT)
Flammability: UL 94V-0
Color: Gray or Black
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ” [ 1.27 μm ] Min. Nickel
Wiping Area: (See Ordering Information)
Termination Area: (See Ordering Information)
Marking:
Part Number and Date Code
Electrical
Contact Resistance:
Current Rating:
Insulation Resistance:
Withstanding Voltage:
20 mΩ Max.
3.0 A @ 30°C T-rise above ambient
1 x 10³ MΩ min. at 500 V
DC
1 x 10³ V
AC
for 1 minute
Environmental
Temperature Rating:
-55°C to +125°C
Temperature Rating:
260°C per J-STD-020C
Moisture Sensitivity Level:
1 (per J-STD-020C)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
DIN R-Form Plug
.100” Inverse Mount, Vertical, Solder Tail or Press-Fit Termination
DIN 41612 Series
A
D
B
.200
5.08
.437
11.10
POSITION A1
.100
2.54
.343
8.71
.205
5.21
PRESS-FIT OR SOLDER TAIL
.195
4.95
S1 MATE LENGTH
.160
[4.06]
S110 MATE LENGTH
.457
11.61
C
C
TAIL LENGTH
E
WITH OR WITHOUT
RETENTION CLIP
FOR SPECIAL PIN ARRANGEMENTS
CONTACT 3M SALES REPRESENTATIVES
.150
3.80
.200
5.08
Au FINISH
Inch
[mm]
Tolerance Unless Noted
.0
Inch
±.1
.00
±.01
.000
±.005
Feed Thru/Wire Wrap
W, DPWI and DPW2 with
plating finish selected from Table 3,
with precious metal plated on both ends.
[ ] Dimensions for
Reference only
Ordering Information
DIN - XXX RPX - XXXX - XXXX
Contact Quantity
See Table
Contact Loading Pattern:
A = A Row only
B = Rows A & C Filled
C = Rows A, B, & C Filled
D = Rows A & B Filled
E = B Row only
Termination Options:
See Table 2
TS-1133-C
Sheet 2 of 4
Plating and Insulator Color Options:
See Table 3
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
DIN R-Form Plug
.100” Inverse Mount, Vertical, Solder Tail or Press-Fit Termination
Contact
Quantity
016
032
048
032
016
032
064
096
064
032
040
080
120
080
040
050
100
150
100
050
DIN 41612 Series
D
E
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
1.500 [38.10]
3.100 [78.74]
3.100 [78.74]
3.100 [78.74]
3.100 [78.74]
3.100 [78.74]
3.900 [99.06]
3.900 [99.06]
3.900 [99.06]
3.900 [99.06]
3.900 [99.06]
4.900 [124.46]
4.900
4.900
4.900
4.900
[124.46]
[124.46]
[124.46]
[124.46]
Load
Pattern
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
A
2.140 [54.36]
2.140 [54.36]
2.140 [54.36]
2.140 [54.36]
2.140 [54.36]
3.740 [95.00]
3.740 [95.00]
3.740 [95.00]
3.740 [95.00]
3.740 [95.00]
4.540 [115.32]
4.540 [115.32]
4.540 [115.32]
4.540 [115.32]
4.540 [115.32]
5.540 [140.72]
5.540
5.540
5.540
5.540
[140.72]
[140.72]
[140.72]
[140.72]
Table 1
B
1.754 [44.55]
1.754 [44.55]
1.754 [44.55]
1.754 [44.55]
1.754 [44.55]
3.354 [85.19]
3.354 [85.19]
3.354 [85.19]
3.354 [85.19]
3.354 [85.19]
4.154 [105.51]
4.154 [105.51]
4.154 [105.51]
4.154 [105.51]
4.154 [105.51]
5.154 [130.91]
5.154
5.154
5.154
5.154
[130.91]
[130.91]
[130.91]
[130.91]
1.943 [49.35]
1.943 [49.35]
1.943 [49.35]
1.943 [49.35]
1.943 [49.35]
3.543 [89.99]
3.543 [89.99]
3.543 [89.99]
3.543 [89.99]
3.543 [89.99]
4.343 [110.31]
4.343 [110.31]
4.343 [110.31]
4.343 [110.31]
4.343 [110.31]
5.343 [135.71]
5.343
5.343
5.343
5.343
[135.71]
[135.71]
[135.71]
[135.71]
Table 2
Solder Termination Option No
R1
S1
S110
W
Press-fit Termination Option No
DPS
DPW1
DPW2
DIM “C” in (mm)
0.157 (3.99)
0.157 (3.99)
0.110 (2.79)
0.512 (13.00)
0.189 (4.80)
0.512 (13.00)
0.669 (16.99)
Comments
with retention clips
Plating
Suffix
TG30
Insulator
Color
Gray
Press-Fit
Terminations
(RIA E2 & C2
apply)
(RIA E2 & C2
apply)
(RIA E2 & C2
apply)
Table 3
Solder Tail
Terminations
(RIA E3 & C2 apply)
Plating Composition
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au Contact Area
0.18 μm [7 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au over 0.18 μm
[7 μ”] Min. PdNi Contact Area (each end)
2.54 μm [100 μ”] Min. SnPb Term. Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm{3 μ”] Min. Au over 0.18 μm
[7 μ”] Min. PdNi Contact Area
5.08 μm [200 μ”] Min. RoHS
Compliant Whisker Mitigating
Matte Sn Term. Area
1.27 μm [50 μ”] Min. Ni all over
0.76 μm [30 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Reflowed Matte
Whisker Mitigating Sn Term. Area
1.27 μm [50 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au over 0.18 μm
[7 μ”] Min. PdNi Contact Area
5.08 μm [200 μ”] Min. Reflowed Matte
Whisker Mitigating Sn Term. Area
1.27 μm [50 μ”] Min. Ni all over
0.25 μm [10 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Reflowed Matte
Whisker Mitigating Sn Term. Area
1.27 μm [50 μ”] Min. Ni all over
TR
Gray
(RIA E3 & C2 apply)
RR
Gray
N/A
HM
Gray
(RIA E1 & C1
apply)
N/A
MH
Black
(RIA E1 & C1
apply)
(RIA E1 & C1 apply)
HS
Black
(RIA E1 & C1
apply)
(RIA E1 & C1 apply)
KT
Black
(RIA E1 & C1
apply)
(RIA E1 & C1 apply)
TS-1133-C
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
DIN R-Form Plug
.100” Inverse Mount, Vertical, Solder Tail or Press-Fit Termination
DIN 41612 Series
-C-
D
E
.012
.30
C
B
A
1
2
X
.100
2.54
TYP.
.100
2.54
-B-
.200
5.08
O
lO
.110
2.79
0.006
M
A B C
PLATED THRU HOLE
l O
0.004
M
A B C
O
F
.100
2.54
-A-
RECOMMENDED MOUNTING HOLE PATTERN
Hole Plating Table For TG, TR, RR (Press-Fit Leads)
Hole
“F”
Drilled Hole Dia. In (mm)
Cu Thickness in (mm)
SnPb Thickness μin (μm)
Finished Dia. In (mm)
0.037 - 0.043 (0.94 - 1.09)
Hole Plating Table For TG, TR, RR (Solder Tail Leads)
Hole
“F”
Drilled Hole Dia. In (mm)
Cu Thickness in (mm)
SnPb Thickness μin (μm)
Finished Dia. In (mm)
0.041 - 0.049 (1.04 - 1.24)
Hole Plating Table For MH, HS, KT (Press-Fit Leads)
Hole
“F”
Drilled Hole Dia. In (mm)
0.0425-0.044 (1.080-1.118) #57 OR
1.10mm Twist Drill
Cu Thickness in (mm)
0.0010 - 0.0020 (0.025 - 0.045)
Immersion Whisker Mitigating
Matte Sn Thickness μin (μm)
20 - 100 (0.508 - 2.54)
Finished Dia. In (mm)
0.037 - 0.043 (0.94 - 1.09)
Hole Plating Table For MH, HS, KT (Solder Tail Leads)
Hole
“F”
Drilled Hole Dia. In (mm)
Cu Thickness in (mm)
Immersion Matte Sn Thickness
μin (μm))
Finished Dia. In (mm)
0.041 - 0.049 (1.04 - 1.24)
TS-1133-C
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-D
Power technology
京公网安备 11010802033920号
EEWORLD
