EEWORLDEEWORLDEEWORLD

Part Number

Search

PH1-SS2SC4005

Description
Transponder, SC/UPC Connector,
CategoryWireless rf/communication    Optical fiber   
File Size240KB,6 Pages
ManufacturerJDS Uniphase Corporation ( VIAVI )
Websitehttp://www.jdsu.com/index.html
Download Datasheet Parametric View All

PH1-SS2SC4005 Overview

Transponder, SC/UPC Connector,

PH1-SS2SC4005 Parametric

Parameter NameAttribute value
MakerJDS Uniphase Corporation ( VIAVI )
Reach Compliance Codeunknown
Other featuresIT ALSO OPERATE FROM 1280NM TO 1600NM
body height13.2 mm
Body length or diameter84.1 mm
Communication standardsGR-253, OC-192, SONET
Connection TypeSC/UPC CONNECTOR
Fiber optic equipment typesTRANSCEIVER, TRANSPONDER
Nominal operating wavelength1557 nm
Nominal optical power output0.562 mW
minimum return loss-27 dB
COMMUNICATIONS MODULES & SUBSYSTEMS
10 Gb/s TDM/DWDM 300 Pin SFF MSA SR2/IR2/LR2 Transponder
PH1 Series
Key Features
• Three configurations supporting SR2/IR2/LR2 applications
• Supports dense wavelength division multiplexing
(DWDM) applications (without wavelocker)
• Microprocessor controls to support I2C
• Integrated 16:1/1:16 mux/demux
• Small form factor package (2.2" x 3.0" x 0.53") for high
density applications
• Low power consumption: 4.8 W typical, 6.8 W maximum
for TDM applications
• 70 °C maximum operating temperature
• High sensitivity PIN or APD receivers
• SONET, FEC, Ethernet and Multirate Capable Versions
• Forward, counter and line timing clocking modes
Applications
Telecommunications
Metropolitan Area Networks
Subscriber loop
Intra-office SONET/SDH
High bit-rate data communications
JDSU 10 Gb/s PH1 Series transponders are intended for 1550 nm system
applications with reaches of up to 80 km. The series includes three different
transponders for SR2 (25 km), IR2 (40 km), and LR2 (80 km) TDM or DWDM
applications. Each transponder accepts 16 bits of parallel digital data and converts
it to a 10 Gb/s NRZ modulated optical signal. It also accepts a 10 Gb/s NRZ
modulated optical signal and converts it into 16 bit wide parallel digital data.
The PH1 series offers low DC power dissipation and is available in either a small
form factor package (2.2 x 3 x 0.53 inches) or in a larger footprint (3.5 x 4.5 x 0.53
inches) package, depending on system thermal performance requirements. The
transmit design uses an Electro-Absorptive Modulated Laser (EML) which,
depending on the configuration, produces an average output power of between
-4 dBm to 2 dBm (EOL). A PIN (-17 dBm typical sensitivity) or APD (-24 dBm
typical sensitivity) receiver is available, based on system configurations.
JDSU PH1 Series transponders are designed to support the following data rates:
9.953 Gb/s (SONET), 10.3125 Gb/s (Ethernet), 10.664 Gb/s (FEC Encoded),
10.709 Gb/s FEC, or 11.09 Gb/s EFEC. They meet all applicable SONET/SDH standards.
Compliance
• Telcordia GR-253-Core
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
Is the microcontroller's operating speed determined by the crystal oscillator frequency?
I just finished reading the introductory book on microcontrollers, but I am still confused about the role of crystal oscillators. According to my understanding, the machine cycle occupied by each inst...
weimingqiang Embedded System
cyclone v HPS中 hard processor system ->SDRAM ->PHY setting
Where does the PLL reference clock frequency in the hard processor system -> SDRAM -> PHY setting in cyclone v HPS come from? FPGA TO HPS SDRAM PLL reference clock is not enabled. I saw from the infor...
free_think FPGA/CPLD
What is the embedded operating system Linux (Part 1)
Embedded Linux is an embedded operating system based on Linux. It is widely used in mobile phones, personal digital assistants (PDAs), media players, consumer electronics, and aerospace. The following...
84s DSP and ARM Processors
[FPGA entry to actual combat] Spectrum relocation process in the upsampling process in wireless communication; Source code & Q&A
[FPGA entry to actual combat] Spectrum relocation process in the upsampling process of wireless communication; Students who do not understand the knowledge points in the video can ask questions in the...
尤老师 FPGA/CPLD
How to solve the problem that the digital tube scans slowly and then goes to the main function
#includereg52.h#define uchar unsigned char#define uint unsigned intuchar code Disp[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};unsigned char code Disp_Sel[] = {0xFE,0xFD,0xFB,0xF7,0xEF,0xDF,...
leiming121 MCU
Urgent, help with the serial port receiving overflow problem!
My serial port program has encountered a problem, and I have no idea how to solve it. Please help me. I use a 256-byte buffer to store and access commands sent by users from the terminal. If I enter t...
cinderella_lh Embedded System

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1419  2826  1117  2580  2556  29  57  23  52  43 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号