P4KE6.8 thru P4KE400CA, e3
400 Watt Transient Voltage Suppressor
SCOTTSDALE DIVISION
DESCRIPTION
This 400 W Transient Voltage Suppressor (TVS) series is an economical
molded axial-leaded package to protect voltage-sensitive components from
destructive or partial degradation. They are available in both unidirectional
or bi-directional configurations as well as RoHS Compliant (annealed
matte-Tin finish) with an e3 suffix added to the part number. They have a
peak pulse power rating of 400 watts for a 10/1000 µs as depicted in
Figures 1 and 2. The nominal breakdown voltages (V
BR
) in this series
extend from 6.8 to 400 volts. Microsemi also offers a broad spectrum of
additional TVSs to meet your needs.
IMPORTANT:
For the most current data, consult
MICROSEMI’s
website:
http://www.microsemi.com
APPEARANCE
WWW .
Microsemi
.C
OM
DO-41
(DO-204AL)
FEATURES
•
Economical series for thru-hole mounting
•
Available in both unidirectional and bi-directional (add C
or CA suffix to part number for bidirectional)
•
Voltages from 6.8 to 400 V Breakdown (V
BR
)
•
Fast Response
•
Optional 100%
screening for avionics grade
is
available by adding MA prefix to part number for added
100% temperature cycle -55
o
C to +125
o
C (10X) as well
as surge (3X) and 24 hours HTRB with post test V
Z
&
I
R
(in the operating direction for unidirectional or both
directions for bidirectional)
•
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, or JANTXV are available by
adding MQ, MX, or MV prefixes respectively to part
numbers
•
RoHS Compliant devices avaialbe by adding “e3” suffix
•
Surface mount equivalents available as SMAJP4KE6.8
to SMAJP4KE400CA
•
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
APPLICATIONS / BENEFITS
•
Suppresses transients up to 400 watts @ 10/1000
μs
(see Figure 1)
•
Protects sensitive components such as IC’s, CMOS,
2
Bipolar, BiCMOS, ECL, DTL, T L, etc.
•
Protection from switching transients & induced RF
•
Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively
•
Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1: P4KE5.0 to P4KE91A or CA
Class 2: P4KE5.0 to P4KE47A or CA
Class 3: P4KE5.0 to P4KE24A or CA
Class 4: P4KE5.0 to P4KE12A or CA
•
Secondary lightning protection per IEC61000-4-5
with 12 Ohms source impedance:
Class 1: P4KE5.0 to P4KE30A or CA
Class 2: P4KE5.0 to P4KE15A or CA
MAXIMUM RATINGS
•
•
•
•
Operating and Storage Temperature: -65°C to +150°C
Peak Pulse Power: 400 Watts at 10/1000
μs
(see Figure
1, 2 and 3 for t
W
, waveform and derating effects)
Impulse repetition rate (duty factor): 0.01%
Thermal Resistance: 50°C/W junction to leads @ 3/8
inch (10 mm) from body, or 110°C/W junction to ambient
when mounted on FR4 PC board with 4 mm
2
copper
pads (1oz) and track width 1 mm, length 25 mm
Steady-State Power: 2.5 Watts @ T
L
=25°C at 3/8 inch
º
(10 mm) from body, or 1.13 W at T
A
= 25 C on FR4 PC
board described for thermal resistance
Forward Voltage at 25°C: 3.5 V @ 30 A with 8.3 ms half-
sine wave (unidirectional only)
Solder temperatures: 260
°C
for 10 s (maximum)
•
•
MECHANICAL AND PACKAGING
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
FINISH: Tin-Lead or RoHS Compliant annealed
matte-Tin plating readily solderable per MIL-STD-
750, method 2026
MARKING: Body marked with part number
POLARITY: Band denotes cathode. Bidirectional
not marked
WEIGHT: 0.3 grams (approximate)
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
See package dimensions on last page
P4KE6.8 thru 400
•
•
•
•
•
•
•
•
Copyright
©
2007
6-20-2007 REV D
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
P4KE6.8 thru P4KE400CA, e3
400 Watt Transient Voltage Suppressor
SCOTTSDALE DIVISION
GRAPHS
WWW .
Microsemi
.C
OM
Test waveform parameters: tr=10
μs,
tp=1000
μs
FIGURE 1
Peak Pulse Power vs. Pulse Time
FIGURE 2
Pulse Waveform for Exponential Surge
Peak Pulse Power (
P
PP
) or continuous
o
Average Power in Percent of 25 C
C – Capacitance - Picofarads
PACKAGE
DIMENSIONS
P4KE6.8 thru 400
Lead or Ambient Temperature C
o
V
(BR)
- Breakdown Voltage – Volts
FIGURE 4
P4KE Typical Capacitance vs.
Breakdown Voltage (Unipolar)
NOTE:
Cathode indicated
by band. All dimensions in
millimeters (inches)
FIGURE 3
Derating Curve
Copyright
©
2007
6-20-2007 REV D
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 4
Talking
京公网安备 11010802033920号
EEWORLD
