5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Tight stability performance
(+/-0.3 ppm) over Industrial Temperatures (-40 °C to +85 °C)
(+/-0.2ppm) over Commercial Temperatures (0 to 70C)
Available in both 10 and 4/5 pads configurations
3.0 V, 3.3 V and 5.0 V versions
Low phase noise and Excellent G-Sens performance: 1.5ppb/G
Tri-state Function available
N (10 Pad)
Package Option
Product Description
MtronPTI’s M611x Series TCXO’s and TCVCXO’s provide design engineers with low voltage, surface mount products
with extremely tight stability (to ±0.2 ppm) over temperature and time. Specially processed crystals enable the M611x to
achieve consistent long-term stability and minimal frequency shift after reflow. This processing also achieves excellent
g-sensitivity (1.5 ppb/g). The low phase noise (-155 dBc/Hz at 100 kHz) makes the M611x ideal for those design
engineers working on all types of systems as the reference timing source. With two standard package configurations,
MtronPTI can support the original industry standard 10 pad as well as the newer 4/5 pad topology (4 pad is without
Tristate function and 5 pad is with Tristate function).
Product Applications
The M611x Series is ideally suited for a wide range of applications such as GPS, military, avionics, test and measurement,
WLAN, WiMax base stations (see Fig 2.), point to point/multi-point radios, medical equipment, frequency synthesis, frequency
translation and land mobile radio. Standard output for the M611x series is HCMOS compatible or clipped sinewave. The
product is ideally suited for battery and remote applications where it draws as little as 1.5 mA of current with a 3.3 volt supply
at 13 MHz. This low power consumption provides an advantage over similarly specified ovenized oscillators for power-
sensitive applications. The M611x series offers ±9.2 ppm minimum pull range with excellent tuning linearity performance for
critical PLL applications. This series is available in frequencies from 8 to 40MHz and selectively to 52 MHz.
Product Ordering Information
M6110Sxxx, M6111Sxxx & M6112Sxxx - Contact factory for datasheets.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Revision: 1-5-11
M611x Series
Performance Characteristics
Parameter
Frequency Range
Operating Temperature
Storage Temperature
Frequency Tolerance @ +25°
C
Frequency Stability
Stability Vs. Reflow
Frequency Vs. Supply
Frequency Vs. Load
Aging (First Year)
Aging (First Year)
Aging (10 Year)
Aging (10 Year)
Supply Voltage Tolerance
Supply Current (I
D
)
Symbol
F
O
T
A
T
STG
Min.
8
-40
-55
-1.0
-1.0
Typ.
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Max.
52
+85
+125
+1.0
Units
MHz
°
C
°
C
ppm
Conditions/Notes
Contact factory above 40 MHz
See Ordering Information
For TCXO only
(Fmax – Fmin)/2
For 5% supply voltage variation
For 5% load variation
F
0
< 20 MHz
F
0
> 20 MHz
F
0
< 20 MHz (Includes first year)
F
0
> 20 MHz (Includes first year)
See Ordering Information
HCMOS output at 13 MHz
HCMOS output at 26 MHz
HCMOS output at 52 MHz
Clipped sinewave output at 13 MHz
Clipped sinewave output at 26 MHz
Clipped sinewave output at 52 MHz
I
OH
/I
OL
= ± 4 mA, Vs = +3.0 V
I
OH
/I
OL
= ± 4 mA, Vs = +3.0 V
F
o
< 40 MHz
F
o
> 40 MHz
Ref. to ½ V
S.
HCMOS only
Ref. 10% to 90%. HCMOS only
HCMOS output
Clipped sinewave output
Over Control Voltage Range
For V
S
= 3.0
For V
S
= 3.3
For V
S
= 5.0
-1.0
-2.0
-3.0
-5.0
-5.0
Output Logic Levels
(HCMOS)
Output Level
(Clipped Sinewave)
Waveform Symmetry
Rise/Fall Time
Output Load
Frequency Adjustment
Control Voltage Range
V
OL
V
OH
80
1.0
0.8
40
Input Leakage Current
Input Resistance
Linearity
Modulation Bandwidth
Tristate Function
Tristate Leakage Current
Phase Noise
(Typical 10 MHz CMOS)
±9.2
0.3
0.3
0.5
-50
100
2 kHz
70
-100
See Ordering Information
+1.0
ppm
±0.02
±0.1
ppm
±0.02
±0.1
ppm
+1.0
ppm
+2.0
ppm
+3.0
ppm
+5.0
ppm
+5.0
%
2.2
3.3
mA
3.5
5.0
mA
6.0
9.2
mA
1.5
2.2
mA
1.8
2.7
mA
3.0
4.5
mA
20
%V
S
%V
S
V
pk-pk
V
pk-pk
60
%
8
ns
15
pF
10/10
Kohm/pF
ppm
2.7
Volts
3.0
Volts
4.5
Volts
+50
µA
Kohm
3
%
%V
S
%V
S
µA
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
Electrical Specifications
30
+100
-95
-125
-145
-152
-155
Output enabled. Logic “1” or “Open”
Output disabled. Logic “0” or “GND”
10 Hz Offset
100 Hz Offset
1 KHz Offset
10 KHz Offset
100 kHz Offset
100 g
10 g from 10 to 2000 Hz
RoHS Compliant
Environmental
Shock
Vibration
Solderability
Package
Max Soldering Conditions
MIL-STD-202, Method 213, Condition C
MIL-STD-202, Methods 201 & 204
EIAJ-STD-002
5.0 x 7.0 x 2.0 mm, SMT
See solder profile
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M611x Series
Phase Noise Plot
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Output Waveform (HCMOS Output)
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M611x Series
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Product Dimension & Pinout Information - Package Code N (10 Pad)
Pin Connections
Function
Pad
Vref or N/C*
1
N/C - Do Not Connect
2
N/C - Do Not Connect
3
Ground
4
Output
5
N/C - Do Not Connect
6
N/C - Do Not Connect
7
Tristate
8
Supply Voltage (V
s
)
9
Control Voltage
10
*Vref is not available for stabilities
less than ±1.0 ppm
Part Marking Guide
Line
Description
1
Part family, year,
month of production
2
Frequency
SUGGESTED SOLDER PAD LAYOUT
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M611x Series
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Product Dimension & Pinout Information - Package Code T (4/5 Pad)
Pin Connections
Function
Vcontrol
N/C - Do Not Connect
N/C - Do Not Connect
Ground
N/C - Do Not Connect
Output
Tristate or
N/C - Do Not Connect
Power
N/C - Do Not Connect
Pad
1
A
B
2
C
3
4
5
D
Part Marking Guide
Line
Description
1
Part family, year,
month of production
2
Frequency
SUGGESTED SOLDER PAD LAYOUT
WITHOUT TRISTATE (4 PAD)
SUGGESTED SOLDER PAD LAYOUT
WITH TRISTATE (5 PAD)
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Table of Contents: Part 1 Basics Example 1 A BUG worth "three days" 2 Example 2 Flexible use of increment (decrement) operators 5 Example 3 Arithmetic operator calculator 7 Example 4 Logical operator ...
Send one byte of data from SPI:
void SPI_Set_SD_Byte(unsigned char txData)
{
UCB0TXBUF = txData; // Write to the transmit buffer
while ((UCB0IFGUCTXIFG) == 0); // Waiting for sending to complete
}
Ana...
The 802.11 standard has now evolved to Wi-Fi 6 and Wi-Fi 6E , providing services in the frequency band range above 5 GHz to 6 GHz (up to 7125 GHz ). This higher frequency range increases the video cap...
I am using a mini2440 board, and now I want to add an SDIO wireless network card to the SD slot on it. I added the corresponding SDIO components in PB: SDIO Standard Host Controller SDIO WiFi (SyChip)...
PV DC fuses are safety devices used to protect PV panels, inverters, and DC loads. To ensure their safety and reliability, they must be UL248 certified.
Before applying for UL248 certifi...[Details]
There are many different ways of human-computer interaction. The more common ones are listed below:
Mouse interaction: Using a mouse to operate a computer and interact was the most common human...[Details]
On August 24th, Jin Yuzhi, CEO of Huawei's Intelligent Automotive Solutions BU, announced the first automotive application of Huawei Qiankun's unique Limera technology. This technology eliminates t...[Details]
A vacuum eutectic furnace is a critical piece of equipment used in the manufacturing and processing of various materials, particularly in the fields of microelectronics and nanotechnology. One of t...[Details]
The jammer is a signal blocker, mainly composed of a chip and a radio transmitter. When the car owner presses the remote control lock button, the jammer interferes with the electronic lock receivin...[Details]
Electric vehicles are currently gaining momentum, but this is just a facade. Fuel-powered vehicles remain unchallenged. While electric vehicles boast unique advantages in environmental emissions an...[Details]
Current Development Status of DVR Market
A DVR, or digital video recorder, uses a hard disk for recording, unlike traditional analog video recorders. It's often called a DVR because it's a com...[Details]
With the rapid advancement of automation technology, collaboration between robots is no longer just science fiction. Imagine dozens of machines moving goods in a warehouse without interfering with ...[Details]
In the summer of 2025, BlueOval SK, a joint venture between Ford and SK On, officially started production at its first battery factory in Kentucky.
According to the original plan, this w...[Details]
According to foreign media reports, Nissan Motor has recently reached a cooperation with US battery technology company LiCAP Technologies to jointly promote the research and development of next-gen...[Details]
As the scale and business applications of national e-government networks continue to expand, the data and services transmitted over them are becoming increasingly sensitive and critical. To protect...[Details]
1 Source of creativity
With the further development of electronic technology, electronic pets have gradually entered people's family life. At present, there are two main categories of relative...[Details]
With the development of science, the use of variable frequency technology is becoming more and more widespread, and it is used in both industrial equipment and household appliances. Inverter air co...[Details]
Laird Thermal Systems has introduced the HiTemp ET series Peltier cooler modules, which can operate at high temperatures and provide on-site cooling for sensitive electronic devices.
Dig...[Details]
Normally, we determine our location and where we want to go by comparing our surroundings with observation and simple GPS tools. However, this kind of reasoning is very difficult for self-driving c...[Details]
Talking
京公网安备 11010802033920号
EEWORLD
