HLMP-DB25, HLMP-KB45
T-1¾ (5 mm), T-1 (3 mm)
Blue LED Lamps
Data Sheet
Description
These blue LEDs are designed in industry standard T-1 and
T-1¾ package with clear and non diffused optics. They are
also available in tape and reel, and ammo-pack option for
ease of handling and use.
These blue lamps are ideal for use as indicators and for
general purpose lighting. Blue lamps offer color differen-
tiation as blue is attractive and not widely available.
Features
x
Popular T-1¾ and T-1 diameter packages
x
General purpose leads
x
Reliable and rugged
x
Available on tape and reel
x
Binned for color and intensity
Applications
x
Status indicators
x
Small message panel
x
Running and decorative lights for commercial use
HLMP-KB45
Package Dimensions
HLMP-DB25
5.08 (0.200)
4.57 (0.180)
3.18 (0.125)
2.67 (0.105)
3.43 (0.135)
2.92 (0.115)
9.19 (0.352)
8.43 (0.332)
6.35 (0.250)
5.58 (0.220)
4.70 (0.185)
4.19 (0.165)
0.89 (0.035)
0.64 (0.025)
23.0
MIN.
(0.90)
0.45 (0.018)
SQUARE NOMINAL
CATHODE
23.0
MIN.
(0.90)
1.02 (0.040)
NOM.
0.45 (0.018)
SQUARE NOM.
1.27 (0.050)
NOM.
6.10 (0.240)
5.59 (0.220)
CATHODE
2.54 (0.100)
NOM.
1.27 (0.050)
NOM.
2.54 (0.100) NOM.
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS.
CAUTION:
Devices are Class I ESD sensitive. Please observe appropriate precautions dur-
ing handling and processing. Refer to Application Note AN-1142 for additional details.
Selection Guide
Luminous Intensity Iv (mcd)
Part Number
HLMP-KB45-A00xx
HLMP-DB25-B00xx
Package
T-1
T-1¾
Viewing Angle
40
25
Min.
30
40
Max.
–
–
Part Numbering System
HLMP - x x xx - x x x x x
Mechanical Option
00: Bulk
02: Tape & Reel, Straight Leads
DD: Ammo Pack
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Viewing Angle
25: 25 degrees
45: 40 degrees
Color Options
B: Blue
Package Options
D: T-1¾ (5 mm)
K: T-1 (3 mm)
Absolute Maximum Ratings at T
A
= 25°C
Parameter
Peak Forward Current
DC Current
[1]
Reverse Voltage
Transient Forward Current
[2]
(10
Psec
Pulse)
LED Junction Temperature
Operating Temperature
Storage Temperature
Wave Soldering Temperature [1.59 mm (0.063 in.) from Body]P
Solder Dipping Temperature [1.59 mm (0.063 in.) from Body]
Blue
70
30
350
115
–20 to +80
–30 to +100
250°C for 3 seconds
260°C for 5 seconds
Units
mA
mA
mA
°C
°C
°C
Not recommended for reverse bias
Notes:
1. Derate linearly from 50°C as shown in Figure 6.
2. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and
wirebond. It is not recommended that this device be operated at peak currents above the Absolute Maximum Peak Forward Current.
2
Optical Characteristics at T
A
= 25°C
Luminous Intensity
I
V
(mcd) @ I
F
= 20 mA
Min.
40
30
Part Number
HLMP-DB25-B00xx
HLMP-KB45-A00xx
Color, Dominant
Wavelength
O
d[1]
(nm)
Typ.
470
470
Peak Wavelength
O
PEAK
(nm)
Typ.
464
464
Viewing Angle
2T
1/2[2]
Degrees
Typ.
25
40
Notes:
1. The dominant wavelength,
O
d
, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the
device.
2.
T
1/2
is the off-axis angle at which the luminous intensity is half of the axial luminous intensity.
Electrical Characteristics at T
A
= 25°C
Forward Voltage
V
F
(Volts)
@ I
F
= 20 mA
Typ.
Max.
3.2
3.2
3.8
3.8
Part Number
HLMP-DB25-B00xx
HLMP-KB45-A00xx
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
380
Speed
Response
W
s
(ns)
Typ.
500
500
30
Capacitance
C (pF), V
F
= 0,
f = 1 MHz
Typ.
97
97
Thermal Resistance
RT
J-PIN
(°C/W)
Junction to
Cathode Lead
Typ.
260
290
I
F
– FORWARD CURRENT – mA
430
480
530
580
WAVELENGTH - nm
630
680
25
20
15
10
5
0
0
1
2
3
V
F
– FORWARD VOLTAGE – V
4
Figure 1. Relative intensity vs. wavelength
RELATIVE INTENSITY
Figure 2. Forward current vs. forward voltage
1.6
RATIO OF PEAK CURRENT TO
TEMPERATURE DERATED DC CURRENT
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
10
1.4
300
3K
Hz
1K
10
KHz
100
Hz
Hz
R
REF
ESH
Hz
1.2
RAT
E
1.0
20
30
40
50
60
70
I
P
– PEAK FORWARD CURRENT – mA
80
1
1.00E-06
1.00E-05
1.00E-04
1.00E-03
PULSE WIDTH (SECONDS)
1.00E-02
Figure 3. Relative intensity vs. peak forward current (300
Ps
pulse width,
10 ms period)
Figure 4. Maximum Tolerable Peak Current vs Pulse Width
3
1.4
35
I
F
– FORWARD CURRENT – mA DC
0
5
10
15
20
25
30
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
1.2
1.0
0.8
0.6
0.4
0.2
0
30
25
20
15
10
5
0
0
10
20
30
40
50
60
70
80
90
T
A
– AMBIENT TEMPERATURE – °C
I
F
– DC FORWARD CURRENT – mA
Figure 5. Relative luminous intensity vs. forward current
Figure 6. Maximum DC forward current vs. ambient temperature. Derating
based on T
J
max. = 115°C
20°
30°
40°
50°
10°
0°
1.0
.8
.6
60°
70°
80°
90°
.4
.2
10° 20° 30° 40° 50° 60° 70° 80° 90° 100°
Figure 7. Relative luminous intensity vs. angular displacement for HLMP-DB25
20°
30°
40°
50°
10°
0°
1.0
.8
.6
60°
70°
80°
90°
.4
.2
10° 20° 30° 40° 50° 60° 70° 80° 90° 100°
Figure 8. Relative luminous intensity vs. angular displacement for HLMP-KB45
4
Soldering/Cleaning
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloro-ethylene, carbon
tetrachloride, etc.) are not recommended for cleaning LED
parts. All of these various solvents attack or dissolve the
encapsulating epoxies used to form the package of plastic
LED parts.
Intensity Bin Limits
Bin
A
B
C
D
E
F
G
H
J
K
L
M
N
Color Bin Limits (nm at 20 mA)
Blue
Bin ID
1
2
3
4
5
Intensity Range (mcd)
Min.
Max.
30.0
40.0
50.0
65.0
85.0
110.0
140.0
180.0
240.0
310.0
400.0
520.0
680.0
40.0
50.0
65.0
85.0
110.0
140.0
180.0
240.0
310.0
400.0
520.0
680.0
880.0
nm @ 20 mA
Min.
460.0
464.0
468.0
472.0
476.0
Max.
464.0
468.0
472.0
476.0
480.0
Tolerance for each bin limit is ±0.5 nm.
Tolerance for each bin limit is ± 15%.
Mechanical Option Matrix
Mechanical
Option Code
00
02
DD
Definition
Bulk Packaging, minimum increment 500 pcs/bag
Tape & Reel, straight leads, minimum increment 1300 pcs/reel
Ammo Pack, straight leads with minimum increment 2000pcs/pack
Note:
All categories are established for classification of products. Products may not be available in all
categories. Please contact your local Avago representative for further clarification/information.
5
京公网安备 11010802033920号
EEWORLD
