The reference level for the relative attenuation arel of the TFS 2140D is the maximum attenuation in the pass band. The maximum attenuation in the pass
band is defined as the insertion loss ae. The nominal frequency
f
N
is fixed at 2140,0 MHz without any tolerance or limit. The values of relative attenuation
arel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the
production tolerance scheme.
Data
Insertion loss
Nominal frequency
Passband
Pass band ripple
Pass band variation
Relative attenuation
0,3
2290,0
MHz
MHz
… 2000,0
… 3000,0
MHz
MHz
p-p
*
typ. value
ae
f
N
PB
p-p
p-p
arel
32
35
4
8,5
-
OTR
TCf **
-
-
-78
ppm/K
dB
dB
ns
dB
3,5
-
-
0,39
0,44
MHz
MHz
f
N
MHz
tolerance / limit
max.
5,0
2140,0
±
34,0
1,0
1,5
dB
MHz
MHz
dB
dB
max.
max.
min.
min.
max.
min.
max.
27
27
8
7
10
dB
dB
ns
dB
dBm
Group delay ripple within PB
Return loss
Input power level
Operating temperature range
Storage temperature range
- 40 °C ... + 85 °C
- 40 °C ... + 85 °C
-
Temperature coefficient of frequency
*) target is typ 5ns p-p ripple within passband after 3rd order detrend
**)
∆
f(Hz) =TC
f
(ppm/K) x(T-T
0
) x f
To
(MHz)
Generated:
Checked / Approved:
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail:
tft@vectron.com
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.
Filename: tfs 2140d.doc
Version 1.1
18.12.2008
Vectron International
Filter characteristic
0
Filter specification
TFS 2140D
2/5
0
-1.4
9
-10
-2.8
-4.2
-20
m a g n itu d e in d B
magnitude in dB
-5.6
6
-30
-7
-8.4
-40
-9.8
3
-11.2
-50
-12.6
-60
115
520
925
1330
1735
frequency in MHz
2140
2545
2950
-14
2060
2076
2092
2108
2124
2140
2156
frequency in MHz
2172
2188
2204
0
2220
Construction and pin connection
(All dimensions in mm)
6
5
4
1
2
3
4
5
6
Ground
Input
Ground
Ground
Output
Ground
P40D
●
W51
1,2 Max.
1
2
3
Date code
0,1
3 ±0,15
1,5
1
3
0,75
0,6
6
0,6
4
Date code:
W
X
A
...
Year + week
2008
2009
2010
50 Ohm Test circuit
L1
2
5
L2
SAW
1, 3, 4, 6
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail:
tft@vectron.com
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.
VSWR
Filename: tfs 2140d.doc
Version 1.1
18.12.2008
Vectron International
Stability characteristics, reliability
Filter specification
TFS 2140D
3/5
After the following tests the filter shall meet the whole specification:
1. Shock:
2. Vibration:
3. Change of
temperature:
4. Resistance to
solder heat (reflow):
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
reflow possible: three times max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
Pull Off Direction
9000
min. 300 mm
min. 500 mm
min. 300 mm
Tape (all dimensions in mm)
W
: 8,00 ± 0,3
Po
: 4,00 ± 0,1
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,1
F
: 3,50 ± 0,05
G(min)
: 0,75
P2
: 2,00 ± 0,05
P1
: 4,00 ± 0,1
D1(min)
: 1,50
Ao
: 3,25 ± 0,1
Bo
: 3,25 ± 0,1
Ct
: 5,5 ± 0,1
P1
Date Code
t
Do
Po
P2
E
G
Ct
Bo
F
Ko
Typ
PIN Marker
D1
Ao
W 2
Reel (all dimensions in mm)
A
: 330
W1
: 8,4 +1,5/-0
W2(max) : 14,4
N(min)
: 50
C
: 13,0 +0,5/-0,2
C
A
N
W 1
The minimum bending radius is 45 mm.
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail:
tft@vectron.com
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.
G
W
Filename: tfs 2140d.doc
Version 1.1
18.12.2008
Vectron International
Air reflow temperature conditions
Filter specification
TFS 2140D
4/5
Conditions
Average ramp-up rate (30°C to 217°C)
> 100°C
> 150°C
> 217°C
Peak temperature
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
Exposure
less than 3°C/second
between 300 and 600 seconds
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
max. 300 s
10 ... 30 s
30 ... 150 s
Time / s
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail:
tft@vectron.com
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.
Filename: tfs 2140d.doc
Version 1.1
18.12.2008
Vectron International
History
Version
1.0
1.1
Reason of Changes
Filter specification
TFS 2140D
5/5
Name
Strehl
S.Springfeldt
Date
18.01.2008
18.12.2008
- Generation of development specification
- Generation of filter specification
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail:
tft@vectron.com
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
京公网安备 11010802033920号
EEWORLD
