LM1601-7RD6AHFU datasheet, PDF

Datasheet> All Categories > Power/power management> The power supply circuit> LM1601-7RD6AHFU

LM1601-7RD6AHFU: DescriptionAC-DC Regulated Power Supply Module, 1 Output, 168.50 X 111.20 MM, 38.70 MM HEIGHT, METAL, CASE M02, MODULE; CategoryPower/power management The power supply circuit; File Size536KB，24 Pages; ManufacturerBel; Websitehttp://www.belfuse.com

Download Datasheet Parametric View All

LM1601-7RD6AHFU Overview

AC-DC Regulated Power Supply Module, 1 Output, 168.50 X 111.20 MM, 38.70 MM HEIGHT, METAL, CASE M02, MODULE

LM1601-7RD6AHFU Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Maker	Bel
package instruction	,
Reach Compliance Code	compliant
ECCN code	EAR99
Analog Integrated Circuits - Other Types	AC-DC REGULATED POWER SUPPLY MODULE
Maximum input voltage	264 V
Minimum input voltage	85 V
Nominal input voltage	220 V
JESD-30 code	R-MXMA-X
JESD-609 code	e0
Maximum load regulation	0.333%
Number of functions	1
Output times	1
Maximum operating temperature	71 °C
Minimum operating temperature	-25 °C
Maximum output voltage	26.4 V
Minimum output voltage	4 V
Nominal output voltage	24 V
Package body material	METAL
Package shape	RECTANGULAR
Package form	MICROELECTRONIC ASSEMBLY
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
Certification status	Not Qualified
surface mount	NO
Temperature level	COMMERCIAL EXTENDED
Terminal surface	Tin/Lead (Sn/Pb)
Terminal form	UNSPECIFIED
Terminal location	UNSPECIFIED
Maximum time at peak reflow temperature	NOT SPECIFIED
Fine-tuning/adjustable output	YES

Preview

Download Datasheet

View All

M-Family

DC-DC Converters <100 W

Rugged Environment

50 W DC-DC (AC-DC) Converters

Class I Equipment

Single output: series AM...LM 1000

Dual output:

series AM...LM 2000

Triple output: series AM...LM 3000

Class II Equipment (double insulation)

Single output: series CMZ/DMZ/LMZ 1000

Dual output:

series CMZ/DMZ/LMZ 2000

Triple output: series CMZ/DMZ/LMZ 3000

• Extremely wide input voltage range suitable for

battery (and AC) operation

• Efficient input filter and built-in surge and transient

suppression circuitry

• 4 kV

rms

input to output electric strength test

• Outputs individually isolated and controlled

• Outputs fully protected against overload

Safety according to IEC 950

LGA

M-Family

Table of Contents

........................................... Page

Description .................................................................. 7 - 2

Type Survey ................................................................ 7 - 3

Safety and Installation Instructions ............................. 7 - 4

Functional Description ................................................. 7 - 6

Electrical Input Data .................................................... 7 - 7

Electrical Output Data ................................................. 7 - 9

EMC and Immunity to Input Transients ..................... 7 - 13

Supplementary Data ................................................. 7 - 15

Description of Options ............................................... 7 - 16

Immunity to Environmental Conditions ...................... 7 - 22

Mechanical Data ....................................................... 7 - 24

Type Key and Product Marking ................................. 7 - 25

7.1

Description

The M-family of DC-DC (AC-DC) converters represents a

broad and flexible range of power supplies for use in ad-

vanced industrial electronic systems. Features include high

efficiency, reliability, low output voltage noise and excellent

dynamic response to load/line changes due to individual

regulation of each output.

The converter inputs are protected against surges and tran-

sients occuring at the source lines. An input over- and

undervoltage cut-out circuitry disables the outputs if the in-

put voltage is outside the specified range. Certain types in-

clude an inrush current limitation preventing circuit break-

ers and fuses from being damaged at switch-on.

All outputs are open- and short-circuit proof and are pro-

tected against overvoltages by means of built-in suppres-

sor diodes. The outputs can be inhibited by a logic signal

applied to the connector pin 2 (i). If the inhibit function is not

used pin 2 should be connected with pin 23 to enable the

outputs.

LED indicators display the status of the converter and allow

visual monitoring of the system at any time.

Full input to output, input to case, output to case and output

to output isolation is provided. The modules are designed

and built according to the international safety standard

IEC 950 and have been approved by the safety agencies

LGA (Germany) and UL (USA). The UL Mark for Canada

has been officially recognized be regulatory authorities in

provinces across Canada.

The case design allows operation at nominal load up to

71°C in a free air ambient temperature. If forced cooling is

provided, the ambient temperature may exceed 71

°C

but

the case temperature should remain below 95°C under all

conditions.

A temperature sensor generates an inhibit signal which

disables the outputs if the case temperature

exceeds the

limit. The outputs are automatically re-enabled when the

temperature drops below the limit.

Various options are available to adapt the converters to in-

dividual applications.

The modules may either be plugged into 19 inch rack sys-

tems according to DIN 41494, or be chassis mounted.

Case: aluminium, black finish, self cooling.

Dimensions: 38.7

111.2

168.5 mm. Weight: 770 g.

7-2

MELCHER

The Power Partners.

Recommended Resources

megaphone circuit

Using constant current source circuit diagram

Electronic acupoint physiotherapy device circuit

Sharp-cut active high-pass filter circuit diagram

Infrared remote control device circuit

Amplitude modulation detector using ULN2209 and MC1496K

First Aid: WM5 registry problem, waiting online!!: The program I wrote with EVC4 can modify the registry of WM5. It is the following program today. After modifying it with my program, I checked it with the registry editor that comes with EVC. It shows...; 10317E Embedded System

PROTEL video tutorial PCB part: It is definitely worth a try, as there are not many free video tutorials nowadays and they are not easy to download....; Yound Analog electronics

Implementation of M430/OS on MSP430F149: M430/OS features and functions M430/OS has the following features: ① It adopts a preemptive kernel, that is, a high-priority task can "grab" the CPU control from a low-priority task; ② Each task has a...; Aguilera Microcontroller MCU

pyboardCN V2 is ready to go: The pyboardCN V2 has been fully tested and the latest official firmware (with threads and double-precision floating points) has been written. The supercapacitor is not soldered, because last time a ne...; dcexpert MicroPython Open Source section

MSP430G2553 serial port problem: Before initializing the serial port, set P1.2 to output and enable pull-up; then set P1.2 to the serial port transmit pin, and the serial port fails to send data. Before initializing the serial port, ...; armcu Microcontroller MCU

Has anyone made a "bank queuing system"?: [i=s]This post was last edited by paulhyde on 2014-9-15 03:53[/i] As the title says, has anyone in the forum done this before? I'm working on this with my classmates recently. I hope those who have do...; wfarlen Electronics Design Contest

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components