EEWORLDEEWORLDEEWORLD

Part Number

Search

LK1001-9ERV3

Description
AC-DC Regulated Power Supply Module, 1 Output, 150W, HEAT SINK, METAL, CASE K02, MODULE
CategoryPower/power management    The power supply circuit   
File Size640KB,27 Pages
ManufacturerBel
Websitehttp://www.belfuse.com
Download Datasheet Parametric View All

LK1001-9ERV3 Overview

AC-DC Regulated Power Supply Module, 1 Output, 150W, HEAT SINK, METAL, CASE K02, MODULE

LK1001-9ERV3 Parametric

Parameter NameAttribute value
Brand NamePower-One
Is it lead-free?Contains lead
Is it Rohs certified?incompatible
MakerBel
Parts packaging codeMODULE
package instruction,
Manufacturer packaging codeCASE K02
Reach Compliance Codecompliant
ECCN codeEAR99
Other featuresIT ALSO OPERATES WITH 85 VAC TO 264 VAC INPUT VOLTAGE
Analog Integrated Circuits - Other TypesAC-DC REGULATED POWER SUPPLY MODULE
Maximum input voltage372 V
Minimum input voltage88 V
Nominal input voltage310 V
JESD-30 codeR-MXMA-X
JESD-609 codee0
Maximum load regulation0.392%
Number of functions1
Output times1
Maximum operating temperature71 °C
Minimum operating temperature-40 °C
Maximum output voltage5.5 V
Minimum output voltage0.5 V
Nominal output voltage5.1 V
Package body materialMETAL
Package shapeRECTANGULAR
Package formMICROELECTRONIC ASSEMBLY
Peak Reflow Temperature (Celsius)NOT SPECIFIED
Certification statusNot Qualified
surface mountNO
Temperature levelOTHER
Terminal surfaceTIN LEAD
Terminal formUNSPECIFIED
Terminal locationUNSPECIFIED
Maximum time at peak reflow temperatureNOT SPECIFIED
Maximum total power output150 W
Fine-tuning/adjustable outputYES
K-Family
DC-DC Converters >100 W
Rugged Environment
150 W DC-DC (AC-DC) Converters
Input to output isolation
Single output: AK...LK 1000
Double output: AK...LK 2000
Extremely wide input voltage range
Input over- and undervoltage lock-out
Efficient input filter and built-in surge and transient
suppression circuitry
4 kV
rms
input to output isolation test voltage
Fully isolated outputs
Outputs open- and short-circuit proof
No derating over entire operating temperature range
Safety according to IEC 950
V
DE
C
K-Family
Table of Contents
Page
8.1
Description .................................................................. 8 - 2
Type Survey ................................................................ 8 - 3
Safety and Installation Instructions ............................. 8 - 4
Functional Description ................................................. 8 - 6
Electrical Input Data .................................................... 8 - 7
Electromagnetic Compatibility EMC ............................ 8 - 9
Electrical Output Data ............................................... 8 - 11
Supplementary Data ................................................. 8 - 19
Description of Options ............................................... 8 - 19
Immunity to Environmental Conditions ...................... 8 - 26
Mechanical Data ....................................................... 8 - 27
Type Key and Product Marking ................................. 8 - 28
Description
The K-family of DC-DC (AC-DC) converters represents a
broad and flexible range of power supplies for use in ad-
vanced electronic systems. Features include high effi-
ciency, high reliability, low output voltage noise and excel-
lent dynamic response to load/line changes.
The converter inputs are protected against surges and tran-
sients occuring on the source lines. Input over- and
undervoltage lock-out circuitry disables the outputs if the
input voltage is outside the specified ranges. Certain types
include an inrush current limitation preventing circuit break-
ers and fuses from being damaged at switch-on.
All outputs are open- and short-circuit proof and are pro-
tected against overvoltages by means of a built-in suppres-
sor diode. The outputs can be inhibited by a logic signal ap-
plied to the connector pin i. If the inhibit function is not used
pin 18 must be connected with pin 14 to enable the outputs.
LED indicators display the status of the converter and allow
visual monitoring of the system at any time.
Full input to output, input to case, output to case and output
to output isolation is provided. The modules are designed
and built according to the international safety standards
IEC 950 and have been approved by the safety agencies
VDE (Germany) and UL (USA). The UL Mark for Canada
has been officially recognized be regulatory authorities in
provinces across Canada.
The case design allows operation at nominal load up to
71°C in a free air ambient temperature. If forced cooling is
provided, the ambient temperature may exceed 71
°C
but
the case temperature must remain below 95
°C
under all
conditions.
A temperature sensor generates an inhibit signal which
disables the outputs if the case temperature
T
C
exceeds the
limit. The outputs are automatically re-enabled when the
temperature drops below the limit.
Various options are available to adapt the converters to in-
dividual applications.
The modules may either be plugged into 19 inch rack sys-
tems according to DIN 41494, or be chassis mounted.
Case: Aluminium, black finish, self cooling.
8-2
MELCHER
The Power Partners.
Edition 2/96 - © Melcher AG
Who can help me get this thing? I'm so anxious. It's due tomorrow. Not enough time.
Who can help me with this? I am so anxious.. The application of PROFIBUS protocol in frequency converter. I need to search for information on the Internet.. I don't think I have enough time. Can you h...
pyy1980 MCU
The problem of balanced resistance at the input of the common-mode proportional amplifier
[size=5] The circuit prototype of the common-mode proportional amplifier is as follows. The diagram is taken from the Internet (please contact us to delete if there is any infringement. See Note 1 for...
Jacktang Analogue and Mixed Signal
Does anyone know the ST technical support phone number?
It's too slow to find the answer on the Internet. It will be faster to contact technical support directly. If anyone knows the phone number, please tell me...
moneyhui19 stm32/stm8
2. Simulate switch lights
2. Simulate the switch light 1. Experimental task As shown in Figure 4.2.1, monitor the switch K1 (connected to the P3.0 port) and use the light-emitting diode L1 (connected to the P1.0 port of the mi...
liuyong1989 Power technology
How to read mpu9250 acceleration in FPGA
I am a beginner. I want to use FPGA to read the acceleration of mpu9250 in iic mode. I am using nexys3 development board. I have encountered problems with the board connection. I am here to ask for ad...
QD_aun34 FPGA/CPLD
Looking for someone to develop: driver implemented by Libusb
Background: The USB device is implemented by STM32 microcontroller; The driver on Linux is implemented by Libusb; The program data communication is completely fine; The following functions are impleme...
havefun9120 Linux and Android

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 2298  2660  1726  2820  1899  47  54  35  57  39 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号