• Extended guide rails enable accurate and easy card
insertion
• Single row surface mount solder tails facilitate auto
placement and IR soldering
• Optional 2 mm board standoff enables board
population
• Meets CFA standards for known compatibility and
reliability
• Optional ejector and card retainer can be purchased
pre-assembled or separately
• Integral side solder tab with card grounding feature
and also prevent the card from ‘flying’ out of header
during ejection
• See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of
www.3Mconnector.com for compliance
information (RIA E1 & C1 apply)
Date Modified: May 12, 2010
TS-2329-A
Sheet 1 of 4
Physical
Material: High Temperature Thermoplastic
Flammability: UL 94V-0
Color: Beige
Insulation:
Contact:
Terminal Plating:
Material: Copper Alloy
Underplating: 80 µ" [2.03 µm] Min. Nickel
Wiping Area: 15 µ” or 30 µ” [0.38 – 0.76 µm] Min. Gold
Solder Tail: 100 µ” [2.54 µm] Min. Matte Tin
Electrical
Insulation Resistance:
10
3
MΩ at 500 V
AC
Withstanding Voltage:
500 V
AC
for 1 minute
Current Rating:
1.5 A per pin
Environmental
Temperature Rating:
-40°C to 85°C
Process Temperature Rating:
Max. 260°C (per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Connector for CFast
™
Card
40.16±0.1
[1.581±0.004]
7G24 Series
( )
7.62
[.300]
1.27
[.050](22X)PITCH
0.45±0.05
[.018±0.002]
B
S1
( )
( )
39.23
[1.545]
26.23
[1.033]
( )
( )
20.32
[.800]
4.595
[.181]
PC17
4.595
[.181]
PC1
S7
25.38±0.1
[.999±0.004]
( )
( )
( )
20.32
[.800]
7.62
[.300]
33.66±0.08
[1.325±0.003]
C
1.27
[.050](22X)PITCH
0.40±0.05
[.016±0.002]
C0.6(2X)
(
(
47.80
[1.882]
48.50
[1.910]
)
)
43.03±0.08
[1.694±0.003]
1.300
[.051]
A
A
C OF C
L
40.16±0.1
[1.581±0.004]
45.40±0.1
[1.788±0.004]
( )
( )
25.10±0.1
[.988±0.004]
1.40
[.055]
1.650
[.065]
1.0
[.039]
0.900
[.035]
1.250
[.049]
mm
[inch]
Part No.
N7G24-A0B2XX-00-XHT
N7G24-A0B2XX-10-XHT
Dimension ‘A’
mm [inch]
5.70 [.224]
7.70 [.303]
Tolerance Unless Noted
.0
mm
inch
±.25
±.010
.00
±.15
±.006
.000
±.05
±.002
[ ] Dimensions for Reference
Only
TS-2329-A
Sheet 2 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Connector for CFast
™
Card
49.80
[1.961] MIN
7G24 Series
(
40.16
[1.581]
)
24.80
[.976] TYP
41.05
[1.616] MIN
C OF D
L
18.32
[.721] MAX (2X)
51.60
[2.032] MIN
18.15
[.715] MIN (2X)
COMPONENT REFLOW KEEP OUT ZONE
(FOR NO STANDOFF HEIGHT CONNECTOR)
49.80
[1.961] MIN
(
18.32
[.721] MAX (2X)
40.16
[1.581]
)
6.50
[.256] MIN (2X)
6.92
[.272] MIN (2X)
11.50
[.453] MIN (2X)
C OF D
L
32.80
[1.291] MAX
(
24.80
[.976]
TYP
)
14.75
[.581] MIN (2X)
39.23
[1.545] MAX
51.60
[2.032] MIN
COMPONENT REFLOW KEEP OUT ZONE
(FOR 2MM STANDOFF CONNECTOR)
TS-2329-A
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Connector for CFast
™
Card
7G24 Series
40.16
[1.581]
6.80
[.268]
3.00
[.118]
8.105
[.319]
20.32
[.800]
4.595
[.181]
7.62
[.300]
1.27
[.050](22X)
0.80±0.05
[.031±0.002]
0.08
L
D
Ø2.30
[Ø.091](2X)
Ø1.75
[Ø.069](2X)
3.00
[.118](2X)
4.00
[.157](2X)
PC17
25.10 24.80
[.988] [.976]
2.50
[.098]
PC1
S7
C OF D
L
S1
Ø1.35
[Ø.053](2X)
45.40
[1.788]
46.60
[1.835]
RECOMMENDED PCB THICKNESS 1.65 [0.066] NOMINAL
HOLE & PAD PATTERN TOL ±0.05 [0.002]
Ordering Information
Physical Configuration (Total Arm Length)
A = 39.23 mm
Card Polarization
B = Normal
**D = Inverse
Mounting Style
2 = Surface Mount, Right Angle
1.27 mm Tail Pitch
N7G24 - A 0 X X XX - X 0 - X XX
Packaging Option
HT = Hard Tray
**WF = Tape & Reel
Preassembly
0 = No preassembly accessory
3 = Right Dual-Push Ejector
(P/N: 7G24-B5A6-05)
5 = Left Dual-Push Ejector
(P/N: 7G24-B6A6-05)
7 = Latching Retainer
(P/N: 7E50-C016-00)
0 = No Standoff
1 = 2 mm Standoff
Plating Suffix
**EA=15 µ" min. Gold plated at mated end and Gold Flash at soldertail. 80 µ" min.
Nickel underplated all over.
**EB=30 µ" min. Gold plated at mated end and Gold Flash a soldertail. 80 µ" min.
Nickel underplated all over.
RA=15 µ" min. Gold plated at mated end and 100 µ" min. Matte-Tin plated at soldertail.
80 µ" min. Nickel underplated all over.
RB=30 µ" min. Gold plated at mated end and 100 µ" min. Matte-Tin plated at soldertail.
80 µ" min. Nickel underplated all over.
Notes:
** are for future development
TS-2329-A
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
[indent]When I wanted to test the time consumed by a certain section of a Linux program, I used the function clock_gettime(clockid_t clk_id, struct timespec *tp);, and I added #include in the header f...
#ifdef OS_GLOBALS #define OS_EXT #else #define OS_EXT extern #endif The question may be a bit naive, I don't know if this is possible. In a project, many C files call this program, some C files define...
Note: Dual color temperature dimming is mainly achieved by changing the capacitance of C1 and C2, which results in different delays in VDD power-on time. Multiple capacitors are increased in sequence ...
Shouldn't the PN532's IRQ pin generate an interrupt when a card is received? I'm using the serial port mode, but why is it that even though I set the IRQ pin to be enabled, it doesn't work? I can read...
This section is the key content of this chapter. In this section, we need to master the formula method and the graphical method to calculate the Q point.Before learning, let's first understand a conce...
I don't know if you have ever encountered garbled characters in UBOOT when converting serial port to USB? I use the sbc2410 board, which works fine on Vivi, but garbled characters appear when starting...
On August 24th, Tesla CEO Elon
Musk
revealed information about the upcoming FSD V14, claiming it will outperform human drivers. Tesla FSD lead Ashok stated last year that FSD version 12.5, ...[Details]
In recent years, with the application of the IEC61850 standard and the development and deployment of optoelectronic transformers, the concept of digital substations has been put into practical use ...[Details]
Recently,
Xpeng Motors and Xinlian Integrated Circuit jointly announced the mass production of China's first hybrid silicon carbide product.
Designed and developed by Xpeng Motors and joint...[Details]
1. Introduction
Electronic scales are gradually replacing traditional measuring tools like springs and balances in everyday life, such as electronic price computing scales and electronic weigh...[Details]
introduction
Sonar imaging is of great significance in marine resource development and defense. Its long range, intuitive display of the observed area, and target identification make it widely...[Details]
Electric vehicles are becoming increasingly popular, with increasingly longer ranges. There are two ways to charge electric vehicles: slow charging and fast charging. Which is the most suitable? Sl...[Details]
1. Ease of Use: The HMI module should be designed to be simple and clear, allowing users to easily operate and configure the energy storage device.
2. Ease of Maintenance: The HMI module should...[Details]
On August 22, according to CNBC's report today, the National Highway Traffic Safety Administration (NHTSA) is launching an investigation into Tesla, and the latter is questioned whether it has fail...[Details]
Through AI connection technology supported by Qualcomm X85 5G modem and RF and Qualcomm FastConnect 7900 mobile connection system, seamless switching can be achieved between cellular net...[Details]
The 2025 China International Automotive Testing Exhibition will be held at the Shanghai World Expo Exhibition and Convention Center from August 27 to 29, 2025.
Clacton Seafront, UK, ...[Details]
According to Nikkei, Japan has performed poorly in responding to China's power semiconductor challenges.
There are five major companies in Japan's power chip market: Mitsubishi Electric,...[Details]
Speaking of the problem of vehicle spontaneous combustion, whether it is a pure electric vehicle or a fuel vehicle, there will be incidents of spontaneous combustion. For the same spontaneous combu...[Details]
Consumer demand for premium listening experiences has driven rapid evolution in the wireless headphone market in recent years. Hybrid designs, which utilize two drivers per earbud to enhance sound ...[Details]
Puttshack's Trackaball uses the Nordic nRF54L15 system-on-chip (SoC) to monitor sensors and enable Bluetooth low energy connectivity, while the nPM2100 power management integrated circuit (PMIC) ...[Details]
I recently read an article in the Wall Street Journal titled "We need the right to repair our gadgets" (reference original article: ). The author was very angry about the phenomenon of "planned obs...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
