• Extended guide rails enable accurate and easy card
insertion
• Single row surface mount solder tails facilitate auto
placement and IR soldering
• Optional 2 mm board standoff enables board
population
• Meets CFA standards for known compatibility and
reliability
• Optional ejector and card retainer can be purchased
pre-assembled or separately
• Integral side solder tab with card grounding feature
and also prevent the card from ‘flying’ out of header
during ejection
• See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of
www.3Mconnector.com for compliance
information (RIA E1 & C1 apply)
Date Modified: May 12, 2010
TS-2329-A
Sheet 1 of 4
Physical
Material: High Temperature Thermoplastic
Flammability: UL 94V-0
Color: Beige
Insulation:
Contact:
Terminal Plating:
Material: Copper Alloy
Underplating: 80 µ" [2.03 µm] Min. Nickel
Wiping Area: 15 µ” or 30 µ” [0.38 – 0.76 µm] Min. Gold
Solder Tail: 100 µ” [2.54 µm] Min. Matte Tin
Electrical
Insulation Resistance:
10
3
MΩ at 500 V
AC
Withstanding Voltage:
500 V
AC
for 1 minute
Current Rating:
1.5 A per pin
Environmental
Temperature Rating:
-40°C to 85°C
Process Temperature Rating:
Max. 260°C (per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Connector for CFast
™
Card
40.16±0.1
[1.581±0.004]
7G24 Series
( )
7.62
[.300]
1.27
[.050](22X)PITCH
0.45±0.05
[.018±0.002]
B
S1
( )
( )
39.23
[1.545]
26.23
[1.033]
( )
( )
20.32
[.800]
4.595
[.181]
PC17
4.595
[.181]
PC1
S7
25.38±0.1
[.999±0.004]
( )
( )
( )
20.32
[.800]
7.62
[.300]
33.66±0.08
[1.325±0.003]
C
1.27
[.050](22X)PITCH
0.40±0.05
[.016±0.002]
C0.6(2X)
(
(
47.80
[1.882]
48.50
[1.910]
)
)
43.03±0.08
[1.694±0.003]
1.300
[.051]
A
A
C OF C
L
40.16±0.1
[1.581±0.004]
45.40±0.1
[1.788±0.004]
( )
( )
25.10±0.1
[.988±0.004]
1.40
[.055]
1.650
[.065]
1.0
[.039]
0.900
[.035]
1.250
[.049]
mm
[inch]
Part No.
N7G24-A0B2XX-00-XHT
N7G24-A0B2XX-10-XHT
Dimension ‘A’
mm [inch]
5.70 [.224]
7.70 [.303]
Tolerance Unless Noted
.0
mm
inch
±.25
±.010
.00
±.15
±.006
.000
±.05
±.002
[ ] Dimensions for Reference
Only
TS-2329-A
Sheet 2 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Connector for CFast
™
Card
49.80
[1.961] MIN
7G24 Series
(
40.16
[1.581]
)
24.80
[.976] TYP
41.05
[1.616] MIN
C OF D
L
18.32
[.721] MAX (2X)
51.60
[2.032] MIN
18.15
[.715] MIN (2X)
COMPONENT REFLOW KEEP OUT ZONE
(FOR NO STANDOFF HEIGHT CONNECTOR)
49.80
[1.961] MIN
(
18.32
[.721] MAX (2X)
40.16
[1.581]
)
6.50
[.256] MIN (2X)
6.92
[.272] MIN (2X)
11.50
[.453] MIN (2X)
C OF D
L
32.80
[1.291] MAX
(
24.80
[.976]
TYP
)
14.75
[.581] MIN (2X)
39.23
[1.545] MAX
51.60
[2.032] MIN
COMPONENT REFLOW KEEP OUT ZONE
(FOR 2MM STANDOFF CONNECTOR)
TS-2329-A
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Connector for CFast
™
Card
7G24 Series
40.16
[1.581]
6.80
[.268]
3.00
[.118]
8.105
[.319]
20.32
[.800]
4.595
[.181]
7.62
[.300]
1.27
[.050](22X)
0.80±0.05
[.031±0.002]
0.08
L
D
Ø2.30
[Ø.091](2X)
Ø1.75
[Ø.069](2X)
3.00
[.118](2X)
4.00
[.157](2X)
PC17
25.10 24.80
[.988] [.976]
2.50
[.098]
PC1
S7
C OF D
L
S1
Ø1.35
[Ø.053](2X)
45.40
[1.788]
46.60
[1.835]
RECOMMENDED PCB THICKNESS 1.65 [0.066] NOMINAL
HOLE & PAD PATTERN TOL ±0.05 [0.002]
Ordering Information
Physical Configuration (Total Arm Length)
A = 39.23 mm
Card Polarization
B = Normal
**D = Inverse
Mounting Style
2 = Surface Mount, Right Angle
1.27 mm Tail Pitch
N7G24 - A 0 X X XX - X 0 - X XX
Packaging Option
HT = Hard Tray
**WF = Tape & Reel
Preassembly
0 = No preassembly accessory
3 = Right Dual-Push Ejector
(P/N: 7G24-B5A6-05)
5 = Left Dual-Push Ejector
(P/N: 7G24-B6A6-05)
7 = Latching Retainer
(P/N: 7E50-C016-00)
0 = No Standoff
1 = 2 mm Standoff
Plating Suffix
**EA=15 µ" min. Gold plated at mated end and Gold Flash at soldertail. 80 µ" min.
Nickel underplated all over.
**EB=30 µ" min. Gold plated at mated end and Gold Flash a soldertail. 80 µ" min.
Nickel underplated all over.
RA=15 µ" min. Gold plated at mated end and 100 µ" min. Matte-Tin plated at soldertail.
80 µ" min. Nickel underplated all over.
RB=30 µ" min. Gold plated at mated end and 100 µ" min. Matte-Tin plated at soldertail.
80 µ" min. Nickel underplated all over.
Notes:
** are for future development
TS-2329-A
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
I would like to ask all my colleagues in WinCE development: Is there any successful application that supports WinCE5.0 and uses CF cards, MMC or SD cards as large as 64G?...
TI Precision Labs - Operational Amplifiers: Stability Analysis : https://training.eeworld.com.cn/course/1945Did the circuit you designed to produce a precision DC output end up being an oscillator????...
[align=left]Yesterday, several groups were discussing the continuous price reduction of double-sided board proofing, from 10 yuan to 5 yuan and then to 3 yuan. Of course, the names of two PCB companie...
Basically, I followed the manual, and I was very happy that the operation was successful at the first try! I think that the most thoughtful thing HELPER2416 has done for beginners like me is the detai...
UHF and HF are both general technology categories, but each category has independent supporting protocols. HF is more consistent in the 13.56MHz frequency band, although there are many internation...[Details]
introduction
At the beginning of this century, Veit used Einthoven's galvanometer to record the electrical activity of the human pregnant uterus from the body surface for the first time. In 19...[Details]
The latest C language tools allow you to quickly complete the design of algorithm-intensive applications even if you are not proficient in hardware development.
Hardware designers have b...[Details]
The hardware circuit principle is shown in Figure 1. In the specific design, each part should consider the anti-interference problem to minimize the impact of interference on the performance of the...[Details]
In view of the problems in the actual FPGA development process, such as difficulty in locating faults, long compilation time after repeated code modification, and inability to confirm fault solutio...[Details]
Abstract: Based on the research of the communication process between the reader and the RFID tag, combined with the EPC C1G2 protocol and ISO/IEC18000.6 protocol, a digital circuit of RFID tag appl...[Details]
Overview
Currently, many portable consumer electronic products, such as mobile phones, PDAs, MP3 players, and notebooks, are equipped with display screens. Although the type and size of the di...[Details]
To help improve DC/DC conversion efficiency at lighter loads and higher frequencies, Schottky diodes can be integrated into MOSFET chips to form a single package to reduce power dissipation in the ...[Details]
Some application designs have higher requirements on the speed at which the system's switching power supply can provide voltage output. Figure
1
shows
the
bootstrap
...[Details]
Lifting wavelet transform not only has the advantages of traditional wavelet multi-resolution, but also simplifies the operation and is easy to implement in hardware. Therefore, it is widely used in d...[Details]
introduction
Image compression technology is becoming more and more important in modern life. With the improvement of data processing speed of DSP, a single-chip DSP can achieve good results...[Details]
Abstract: This paper uses the S3C2410 chip GX development board with ARM920T core as the hardware platform and Windows CE operating system to design an embedded system touch screen interactive func...[Details]
Abstract: CC2420 is a 2.4GHz RF chip introduced by Chipcon that complies with the IEEE 802.15.4 specification. It is used to develop ZigBee devices and products for PAN networks such as industrial ...[Details]
The full name of RFID is Radio Frequency Identification, which uses radio frequency to realize data transmission between programmable controller (PLC) or microcomputer (PC) and identification, ther...[Details]
In today’s body control module (BCM) designs, knowledgeable engineers are moving away from electromechanical relays wherever possible. Their next step is to eliminate fuses. But is eliminating ...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
