L64118 MPEG-2 Transport
Controller with
Embedded MIPS CPU (TR4101)
Preliminary Datasheet
LSI Logic’s L64118 MPEG-2 Transport Controller with Embedded MIPS
CPU (TR4101) is a highly integrated set-top box control and
communication device, combining most of the logic needed for a digital
broadcast system (DBS) or cable set-top box onto a single chip. The
L64118’s embedded 32-bit TinyRISC™ MIPS CPU core provides
processing power to support transport and system data, as well as
general-purpose system control.
The L64118 interfaces directly to LSI Logic’s L64704 and L64724
(satellite), and the L64768 (cable) single-chip channel decoders, as well
as to the L64105 MPEG-2 A/V decoder.
The MPEG-2 transport and system demultiplexer can handle 32 Packet
Identifications (PIDs) simultaneously, including audio, video, and general-
purpose data services. It integrates a Digital Video Broadcasting (DVB)-
compliant descrambler block, substantially increasing the security of the
set-top box.
The L64118’s synchronous External System Bus (EBus) communicates
with external peripherals. The L64118 communicates with peripherals
through serial, parallel, SmartCard, and infrared ports. Several general-
purpose I/O pins are provided that let system designers expand the
system’s capabilities.
The L64118 supports industry-standard SDRAM memory of up to
16 Mbytes, using 16 and 64 Mbit SDRAMs. The SDRAM interface
supports PC66/100-compliant SDRAMS.
The L64118 is offered in LSI Logic’s 3.3 V G10
®
-p cell-based technology
and is packaged in a 256-pin PBGA (IF) package.
®
February 1999
Copyright © 1997, 1998 by LSI Logic Corporation. All rights reserved.
1
Figure 1
Typical Set-Top Box Using the L64118
Fast
Parallel
Port
PC
Modem
GP I/Os
Optional 1 Mbyte x 16
SDRAM
IR Blaster/
Receiver
2x
SmartCards
Aux
Port
IEEE1284
Line Driver
3 x RS232
Line Driver
VCXO
27MHz
SDRAM
16 Mbyte
(max.)
27 MHz
16
SDRAM
1 M x 16
16
Satellite/Cable
Tuner
In
L64724
/L64768
TS
L64118
PES
L64105
2
2
External System Bus
I
2
C
2
16/32
2
8
Optional
FLASH
1 Mbyte x 16
16
2
FLASH
1 Mbyte x 16 Teletext
Interface
2
NTSC
PAL
S-VIDEO
L-SPEAKER
R-SPEAKER
PAL / NTSC
Encoder
PCM
DAC
CCIR601VIDEO
ACLK
PCM-AUDIO
The L64118’s embedded 32-bit MIPS CPU (TR4101) runs at 54 MHz.
The chip’s CPU block is 32 bit, while the bus interface to external
memory (through the SDRAM controller) is 16 bit. The CPU can run
MIPS16 and MIPS32 instructions. The 32-bit operations allow
high-performance operation, while 16-bit operations allow for code
optimization and memory savings. Since most transport processing and
filtering is implemented in hardware, much of the CPU’s processing
power can be devoted to system processing.
2
L64118 MPEG-2 Transport Controller with Embedded MIPS CPU (TR4101)
The L64118 processes the transport data packets in the PID Processing
Unit (PPU) according to the MPEG-2 standard draft 13818-1, making
Packetized Elementary Stream (PES), Program Specific Information
(PSI), Service Information (SI), and Private data available to the system.
It also buffers and transfers audio and video PES data packets to the
external decoder device.
The L64118 interfaces directly to LSI Logic’s L64105 MPEG-2 A/V
decoder. It outputs demultiplexed audio and video PES streams for
processing by the L64105. This decoder’s extended channel buffer
feature lets you use part of the L64118 SDRAM space to store A/V PES
data directed to the L64105. One benefit of this is that it lets you free
memory in the L64105 and increases its On-Screen Display (OSD)
capability.
The L64118 also interfaces directly to LSI Logic’s family of single-chip
channel decoders (L64704, L64724, and L64768), which allows channel
data to be transferred in parallel or serial modes. The L64118
implements an automatic sync locking mechanism with a programmable
hysteresis function for reliable locking onto MPEG-2 (0x47) transport
packet sync bytes.
The External System Bus (EBus) is a general-purpose, 32-bit wide
system bus. It is controlled by the L64118 for communication with
external components in the system. This bus provides the system
designer with an interface that permits the glueless connection of devices
such as FLASH, ROMs, and external peripherals.
The L64118’s peripheral interface blocks let you connect external
systems directly to the set-top box. The RS232 ports let you connect a
PC, modem, or terminal directly to the chip. The IEEE1284 parallel port
lets you connect to fast peripheral devices and transfer filtered transport
packets. The IEEE1284 parallel port includes an on-chip DMA controller
for expediting data transfers between memory to, and from, the port.
The L64118 includes an infrared transmitter (blaster) port for applications
such as (remotely) programming a VCR, as well as two independent
infrared receiver ports, which can be used to program the set-top box
using a remote controller.
L64118 MPEG-2 Transport Controller with Embedded MIPS CPU (TR4101)
3
The 27 MHz system clock drives the L64118 internal demultiplexer block,
as well as most of the peripheral modules. The PLL block generates
54 MHz from the 27 MHz system clock to drive the CPU logic.
The L64118 includes four DMA channels (one dedicated to the
IEEE1284 port, three independent) that can be used to transfer data
between peripheral ports and memory, from one memory location to
another, or from memory to an external system device.
Features
The L64118 provides additional system features for a set-top box
application, including:
Channel
•
•
•
Compliance with ISO/IEC 13818-1 (MPEG-2) Transport
specifications
Sustained rates up to 90 Mbits/s serial and up to 13.0 Mbytes/s
parallel transport stream input interface
Direct interface to LSI Logic single-chip channel decoder devices,
such as the L64704, the L64768, and the L64724
Demux
•
PID filtering (32 user-programmable PIDs)
–
–
–
Hardware-assisted section filtering for 30 general-purpose PIDs
(PSI, SI, and Private)
Each filter includes 12 match bytes and 12 mask bytes
Each PID can select up to 32 filters simultaneously
•
•
•
•
•
•
Support of a Program Clock Reference (PCR) PID
CRC32 in parallel to all sections in the filtering process
Descrambler core compliant to DVB common scrambling
specifications
Support for transport-level and PES-level descrambling
Seamless support of scrambled and unscrambled data
Support of up to 12 pairs of 64-bit keys
4
L64118 MPEG-2 Transport Controller with Embedded MIPS CPU (TR4101)
•
•
•
•
•
•
Two 256-byte transport buffers for supporting audio and video PES
streams
32 programmable cyclic buffers in SDRAM memory assignable to a
PID or section filter index
Support for an additional programmable cyclic buffer in SDRAM to
post data to adaptation fields
Program Clock Reference (PCR) recovery and locking
Automatic detecting and switching of audio and video PIDs on splice
points
Audio oversampling (256 or 384 times oversampling) clock
generation
CPU and Subsystems
•
Integration of the CPU system:
–
–
–
–
–
–
–
–
32-bit TR4101 54 MHz TinyRISC CPU
MIPS16 and MIPS-II instruction set compatible
Four Kbyte Data (direct mapped) and Eight Kbyte (two-way set
associative) instruction cache
Basic Bus and Cache Controller unit (BBCC)
Multiply/Divide Unit (MDU)
Debugger Building Module (DBX)
32-bit Timers and Interrupt Controller
In-Circuit Emulator (ICE) port
•
Two interrupt handling modes:
–
Interrupt Compatibility mode supports 12 interrupt ports and six
main interrupt levels. This mode is compatible with the L64108
interrupt structure.
Interrupt Extension mode supports 25 interrupt ports with a
software index to each interrupt source. This new mode can
reduce interrupt latency.
–
L64118 MPEG-2 Transport Controller with Embedded MIPS CPU (TR4101)
5
京公网安备 11010802033920号
EEWORLD
