APPLICATIONS
•
PRESSURE
TRANSDUCERS
•
‘SMART’ VALVES
•
SOLID STATE
PRESSURE SWITCHES
•
PRESSURE
TRANSMITTERS
M
ODEL
SR
• PRESSURE SENSOR
The Model SR is intended for OEM’s requiring
a small pressure sensor with high pressure capability
and superior corrosion resistance. Constructed of
a brazed assembly of 300 series stainless steels, the
SR can tolerate a wide variety of corrosive media
without risk of leaking.
The SR’s design provides high working pressures
and high overload and burst pressures at no extra
cost. The sensing elements are isolated from the
media without using oil-filled isolation technologies.
Unlike other low cost sensors, the SR’s output
is compensated for changes in temperature.
SR S
ERIES
FEATURES
BENEFIT
• High impedance silicon strain gages
• Stainless steel
• 0-15 to 0-2000 psi
• Constant current excitation
• Temperature compensated
• Low current draw allows use with batteries
• Can be used with corrosive media
• Wide range of pressure measurements
• Works with readily available 4-20 mA amplifier IC’s
• Easier, less expensive to use
PRESSURE SENSOR
HOW TO ORDER
SR
Model
100
P
G
T
B
Output
B = 0-100 mV
Range
015
025
050
100
200
300
500
01K
02K
T = Pins
(#22 AWG Solid Wire)
Termination
Unit
P = PSI
G = Gage (PSIG)
Reference
Note: Not all combinations are available. Minimum quantity orders apply. Contact the factory for more details.
SR S
ERIES
TECHNICAL SPECIFICATIONS
RANGE
•
PRESSURE TRANSDUCER
DIMENSIONS
0-15, 25, 50, 100,
0-500, 1000, 2000 psig
200, 300 psig
(0-1, 2, 3, 7, 14, 20 bar g) (0-35, 70, 140 bar g)
(bar values approximate) (bar values approximate)
xx.xx = inches
(xx.x) = mm
5/8" MAX
(15)
.30 MAX
(7.6)
PHYSICAL
Proof Pressure
2 X rated range
without damage
1.5 X rated range
without damage
5 X rated range
without bursting
A
.17 MAX
(4.3)
3/4"
.748/.746
(19.00/18.95) (18.5)
Burst Pressure 10 X rated range
without bursting
Material in Contact
with Media
Shock Resistance
Vibration
Resistance
Weight
4, 22 AWG
TINNED Cu SOLID WIRES
.55 (14) LONG
a
+ Excitation
c
.766 MAX
- Excitation
(19.5)
d
- Signal
b
+ Signal
> 500 psi, 304 SS
<=500 psi, brazed assy of 300 SS
50 g’s peak (5 milliseconds)
O-RING GROOVE
Meets MIL-STD 810B, Figure 514-4, Curve AP,
Time Schedule II, Random Vibration Test
(Overall g rms - 46.3 min)
less than 1 oz (approx. 20 gm)
PRESSURE RANGE (PSI)
Pressure
Range
(PSI)
Bore Dia.
15-500
.500
(12.70)
.375 (9.52)
.375 (9.52)
O-Ring
2-012
2-010
2-010
*A
Sealing
Depth**
.21 (5.33)
.21 (5.33)
.21 (5.33)
Cavity
Depth
.22 (5.58)
.22 (5.58)
.22 (5.58)
ELECTRICAL
Span
Excitation Current
Zero Balance
Input Resistance
Output Resistance
Insulation Resistance
Electrical Connection
25 mV/mA (minimum) at 77
O
F (25
O
C)
4 mA, 5 Vdc max
±5%
F.S. at 77
O
F (25
O
C)
1000 ohms (nominal)
6000 ohms (nominal)
1K megohms at 250 Vdc
four #22 AWG solid wires
1000-1500
2000
PERFORMANCE
Accuracy
±1%
span from best fit straight line including effects of
non-linearity, hysteresis and repeatability
-40
O
to 212
O
F
(-40
O
to l00
O
C)
32
O
to 167
O
F
(0
O
to 75
O
C)
CAUTION:
Contact with sensing surface at bottom of cavity will affect
accuracy and may cause damage. The O-ring groove on 2000 psi unit is
wider to accommodate a backup ring behind the O-ring.
All dimensions in inches (mm).
Operating
Temperature Range
Compensated
Temperature Range
Thermal Effect
Less than
±1%
span -any 90
O
F (50
O
C)
On Zero
change within the compensated temperature range
Thermal Effect
Less than
±1%
span -any 90
O
F (50
O
C)
On Span
change within the compensated temperature range
NOTES: (1) All specifications are measured at 25
°
C and rated excitation unless otherwise
specified.
(2) Includes standard Viton O-ring.
(3) Capsule only. Does not include mounting device.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local
sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell
will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of merchantability and fitness for a particular purpose.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer
to determine the suitability of the product in the application.
Item # 1123700 M.G. 3/01
Sensing and Control
Honeywell
100 Discovery Way
Acton, MA 01720 USA
Tel: (877) 384-1300; Fax: (978) 263-0630
www.honeywell.com/sensing/
Analog electronics
京公网安备 11010802033920号
EEWORLD
