SOURIAU brings to market a lightweight, robust and reliable 8STA High
Density solution from the smallest to the largest size with #26 contact.
A reliable & robust solution
LAY
14
-
68
Well proven design as standard 8STA: derived
from MIL-DTL-38999 & JN1003.
Provides flexibility according to your application.
From shell size 02 to 14.
Designed for 24 to 30 AWG wire, smaller
diameter tubing and boots.
PC tail pin and socket contacts for box design.
High Density layout 14-68 example:
Twice the number of contacts - a size smaller
shell can be used for the same application.
NEW
OUT
7 shell sizes available
Lightweight & flexible
Significant space saving
14-35
14-68
18-35
37 contacts
#22D
68
contacts
#26
66 contacts
#22D
8STA Series
|
High Density
Description
• Derived from MIL-DTL-38999 & JN1003
standard
• Rugged aluminium body to ensure long service
life in the harshest environment
• 100% scoop proof
• Available in 6 shell sizes:
02-05; 04-06; 06-09; 08-12; 10-26; 12-43; 14-68
• Contacts #26 for AWG 24 to 30
Technical features
Mechanical
• Shell:
Aluminium alloy
• Shell plating:
Conductive black zinc
Nickel (F)
• Insulator:
Thermoplastic
• Shell continuity:
≤10mΩ
• Grommet & seal:
Liquid silicone rubber
• Contact:
Copper alloy
• Contact plating:
Gold
• Endurance:
500 mating cycles
• Shock:
300g for 3ms and EIA-364-27
• Vibration:
147m/s², 10 to 2000Hz
Electrical
• Contact resistance:
Size 26: 16mΩ
• Insultation resitance:
≥5000MΩ (at 500Vdc)
• Contact rating:
Size 26: 3 Amp
Environmental
• Operating temperature:
-55°C to +175°C
• Sealing mated connectors:
IP67 (1 metre for 30 min minimum)
• Salt spray:
48 hours
Dimensions, Orientations, Contacts, Tooling and Accessories
Please see ‘‘8STA/8TA Series’’ Catalog.
2
8STA Series
|
High Density
Ordering information
Basic series
Shell type:
0:
Oval flange receptacle
1:
In line receptacle
2:
Oval Flange receptacle with PCB contacts
6:
Plug
7:
Jam nut receptacle
Shell size:
02, 04, 06, 08, 10, 12, 14
Contact layout:
See below
Type of contact:
P:
Pin
S:
Socket
Orientation:
N:
Red,
A:
Yellow,
B:
Blue,
C:
Orange,
D:
Green,
E:
Grey (shell size 02 only),
U:
Universal
Specification:
None :
Standard crimp version
499:
Integrated clinch nut on the flange:
. M2 insert (shell type 0 & 2 only for shell sizes 04 & 06)
. M3 insert (shell type 0 & 2 only for shell sizes 08, 10 & 12)
523:
Light weight in line receptacle - for shell sizes 08 to 12 (shell type 1 only)
528:
Integrated clinch nut on the flange: M2.5 insert (shell type 0 & 2 only for shell sizes 04 & 06)
566:
Rackable plug - for shell sizes 10 & 12 (shell type 6 only)
8STA
6
12
43
P
N
Contact layouts
(viewed from front face of male insulator)
02
05
04
06
06
09
08
12
5#26
6#26
9#26
12#26
10
26
12
43
14
68
26#26
43#26
68#26
3
8STA Series
|
High Density
PCB drilling information
- Viewed from front face of male insulator.
02-05
+Y
04-06
+Y
06-09
+Y
08-12
+Y
10-26
+Y
-X
+X -X
+X -X
+X
-X
+X
-X
+X
All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing.
Introduction to SPCE061A Article source: Lingyang University of Science and Technology Project Author: Lingyang University of Science and Technology Project Release time: 2005-5-26 15:25:54 [b]1.2.1 O...
I just started to get in touch with switching power supplies recently. I am going to make a single-ended flyback switching power supply. After reading the information, I found that the key to the desi...
I'm learning about interrupt drivers recently, and I don't understand a few things. I'd like to ask you guys: 1. In WinCE interrupts, the logical interrupt number is associated with an event, so how i...
input b; reg a; if(i) a = b; assign c = a; if i=0; then what is the value of c, should it be no value, or 0? c is of wire type, so it is not saved, so there is no output value, is this correct?...
I often hear that FPGAs have tens of thousands of gates, but isn't the size of an FPGA measured in logic units? Is there any relationship between the two? How do you estimate tens of thousands of gate...
According to foreign media reports, Ford Motor has applied to the U.S. Patent and Social Security Administration (USPTO) for a patent for a remote vehicle control system that may be used in future ...[Details]
Reflow soldering is a critical process in electronics assembly production, and the cleanliness of the reflow oven has a direct impact on product quality. Dust and residue accumulation within the ov...[Details]
In the electronics manufacturing industry, surface mount technology (SMT) placement machines are core equipment for production lines. However, with many different models available on the market, ch...[Details]
Civilian internal combustion engines operate in the range of approximately 1000-4000 rpm. This results in the engine's kinetic energy being ineffective at low or high rpm, making starting difficult...[Details]
Puttshack's Trackaball uses the Nordic nRF54L15 system-on-chip (SoC) to monitor sensors and enable Bluetooth low energy connectivity, while the nPM2100 power management integrated circuit (PMIC) ...[Details]
When American cartoonist Chester Gould sketched the watch on Dick Tracy's wrist, he had no idea that science fiction would become reality 70 years later. As a comic strip artist, Gould imagined fut...[Details]
On August 20, it was reported that the specifications of Intel's upcoming Panther Lake mobile processor appeared on the Intel GFX CI website, which mainly focuses on Intel's open source Linux drive...[Details]
1. Static Balance
Static balancing is performed on one correction surface of the rotor. The remaining unbalance after correction is used to ensure that the rotor is within the specified range ...[Details]
Shenzhen RF Star's Bluetooth smart e-cigarette solution, by embedding a BLE module in the third-generation e-cigarette tube and coordinating it with the development of a smartphone APP, bring...[Details]
Samsung Display has recently signed a contract with Tesla (US) to supply OLED (organic light-emitting diode) panels for the facial display of Tesla's humanoid robot, Optimus Prime. According to Pho...[Details]
Sometimes an IAR project is closed abnormally. When you open the IAR project again, the project will not be displayed in the Workspace column, as shown in the following figure:
C...[Details]
On August 18, domestic EDA manufacturer HuaDa JiuTian launched the advanced packaging design platform Storm for the first time in the world at the end of July. It claims that the chiplet wiring eff...[Details]
Just how popular are humanoids? Let's take a look.
Humanoid robots' performance capabilities are driving booming orders.
Robots were undoubtedly a major highlight at the 2025 World A...[Details]
Simulation is an essential tool to help robots learn new skills such as perception (understanding the world from camera images), planning (developing a sequence of actions to solve a problem), and ...[Details]
Elevators are the primary means of transport for people and goods. Modern people are pursuing an increasingly high quality of life, placing higher demands on the overall aesthetics, safety, comfort...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
