EEWORLDEEWORLDEEWORLD

Part Number

Search

MIC2779

Description
Voltage Monitor with Adjustable Hysteresis
File Size155KB,7 Pages
ManufacturerMicrochip
Websitehttps://www.microchip.com
Download Datasheet Compare View All

MIC2779 Overview

Voltage Monitor with Adjustable Hysteresis

MIC2779
Micrel, Inc.
MIC2779
Voltage Monitor with Adjustable Hysteresis
General Description
The MIC2779 is a voltage monitor—uniquely designed to
detect two separate voltage thresholds—combined with a
delay generator and logic. It is designed for monitoring the
battery supply of portable digital systems, particularly PDAs,
pagers, and cellular telephones.
High- and low-voltage thresholds can be adjusted inde-
pendently, allowing for wide hysteresis. Voltage detection
thresholds are accurate to 2%.
If the battery voltage falls below the low-voltage threshold,
the output /RST or RST is asserted and latched, preventing
system operation until the battery is replaced or recharged.
Internal logic prevents the output from chattering due to battery
recovery or load removal. The output is asserted for 140ms
(minimum) when a fresh battery is inserted. For applications
requiring open-drain output, see MIC2778/MIC833.
The IC’s power supply input is separate from the detector
inputs, allowing the MIC2779 to be powered from a down-
stream supply, such a boost converter. Supply current is
extremely low (1µA, typical), making it ideal for portable
applications.
A high-precision 1% grade is available. The MIC2779 is sup-
plied in Micrel’s IttyBitty™ 5-pin SOT-23-5 package.
Features
• Optimized for PDAs, cellular telephones, pagers,
and other battery-powered devices
• Independently adjustable high- and
low-voltage thresholds
• Internal logic prevents battery-voltage-fluctuation chatter
• High ±2% voltage threshold accuracy; 1% available
• Built in 140ms (minimum) delay deglitches output
• Extremely low 1µA typical supply current
• For applications requiring open-drain output, see
MIC2778/MIC833
• Immune to brief power supply transients
• 5-pin SOT-23 package
Applications
PDAs
Pagers
Cordless phones
Consumer electronics
Embedded controllers
Personal electronics
Typical Application
MIC5207-3.0BM5
Li-Ion
Cell
604k
1%
56k
1%
340k
1%
MIC2779L
VDD / R S T
LTH
HTH GND
IN
EN
OUT
BYP
GND
V
OU T
3.0V
4.7µF
470pF
V
BAT(hi)
= 3.6V
V
BAT(lo)
= 3.1V
Cellular Telephone Battery Monitor
IttyBitty™ is a trademark of Micrel, Inc.
Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
January 2006
1
MIC2779

MIC2779 Related Products

MIC2779 MIC2779H-1BM5 MIC2779L-1BM5 MIC2779_11 MIC2779H-2BM5 MIC2779L-2BM5
Description Voltage Monitor with Adjustable Hysteresis Voltage Monitor with Adjustable Hysteresis Voltage Monitor with Adjustable Hysteresis Voltage Monitor with Adjustable Hysteresis Voltage Monitor with Adjustable Hysteresis Voltage Monitor with Adjustable Hysteresis
Is it lead-free? - Contains lead Contains lead - Contains lead Contains lead
Is it Rohs certified? - incompatible incompatible - incompatible incompatible
Parts packaging code - SOT-23 SOT-23 - SOT-23 SOT-23
package instruction - LSSOP, TSOP5/6,.11,37 LSSOP, TSOP5/6,.11,37 - LSSOP, TSOP5/6,.11,37 LSSOP, TSOP5/6,.11,37
Contacts - 5 5 - 5 5
Reach Compliance Code - compli compli - compli compli
ECCN code - EAR99 EAR99 - EAR99 EAR99
Adjustable threshold - YES YES - YES YES
Analog Integrated Circuits - Other Types - POWER SUPPLY SUPPORT CIRCUIT POWER SUPPLY SUPPORT CIRCUIT - POWER SUPPLY SUPPORT CIRCUIT POWER SUPPLY SUPPORT CIRCUIT
JESD-30 code - R-PDSO-G5 R-PDSO-G5 - R-PDSO-G5 R-PDSO-G5
JESD-609 code - e0 e0 - e0 e0
length - 2.91 mm 2.91 mm - 2.91 mm 2.91 mm
Humidity sensitivity level - 1 1 - 1 1
Number of channels - 1 1 - 1 1
Number of functions - 1 1 - 1 1
Number of terminals - 5 5 - 5 5
Maximum operating temperature - 85 °C 85 °C - 85 °C 85 °C
Minimum operating temperature - -40 °C -40 °C - -40 °C -40 °C
Package body material - PLASTIC/EPOXY PLASTIC/EPOXY - PLASTIC/EPOXY PLASTIC/EPOXY
encapsulated code - LSSOP LSSOP - LSSOP LSSOP
Encapsulate equivalent code - TSOP5/6,.11,37 TSOP5/6,.11,37 - TSOP5/6,.11,37 TSOP5/6,.11,37
Package shape - RECTANGULAR RECTANGULAR - RECTANGULAR RECTANGULAR
Package form - SMALL OUTLINE, LOW PROFILE, SHRINK PITCH SMALL OUTLINE, LOW PROFILE, SHRINK PITCH - SMALL OUTLINE, LOW PROFILE, SHRINK PITCH SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
Peak Reflow Temperature (Celsius) - 240 240 - 240 240
power supply - 1.5/5.5 V 1.5/5.5 V - 1.5/5.5 V 1.5/5.5 V
Certification status - Not Qualified Not Qualified - Not Qualified Not Qualified
Maximum seat height - 1.45 mm 1.45 mm - 1.45 mm 1.45 mm
Maximum supply current (Isup) - 0.002 mA 0.002 mA - 0.002 mA 0.002 mA
Maximum supply voltage (Vsup) - 5.5 V 5.5 V - 5.5 V 5.5 V
Minimum supply voltage (Vsup) - 1.5 V 1.5 V - 1.5 V 1.5 V
Nominal supply voltage (Vsup) - 1.6 V 1.6 V - 1.6 V 1.6 V
surface mount - YES YES - YES YES
Temperature level - INDUSTRIAL INDUSTRIAL - INDUSTRIAL INDUSTRIAL
Terminal surface - Tin/Lead (Sn85Pb15) Tin/Lead (Sn85Pb15) - Tin/Lead (Sn85Pb15) Tin/Lead (Sn85Pb15)
Terminal form - GULL WING GULL WING - GULL WING GULL WING
Terminal pitch - 0.95 mm 0.95 mm - 0.95 mm 0.95 mm
Terminal location - DUAL DUAL - DUAL DUAL
Threshold voltage nominal - +1.24V +1.24V - +1.24V +1.24V
Maximum time at peak reflow temperature - 30 30 - 30 30
width - 1.625 mm 1.625 mm - 1.625 mm 1.625 mm
Base Number Matches - 1 1 - 1 1
Why can't the three-phase inverter output voltage go up?
I use pure hardware to make a three-phase inverter, with sine waves from LM358 and triangle waves from 555. I use LM358 to compare the SPWM, and the phase difference is 120. But when the input voltage...
刘123 Power technology
Can this circuit for improving LCR measurement accuracy be used?
Some time ago, I posted a thread about the LCR measurement circuit, and I have some ideas. https://bbs.eeworld.com.cn/thread-476594-1-1.html Under normal circumstances, LCR measurement should use two ...
littleshrimp Analog electronics
Application of an Improved UML in Embedded Systems
Abstract In the post-PC era, more and more fields require the support of embedded systems. Traditional embedded system development methods can no longer meet the growing complexity and quality require...
cchengxu Embedded System
Which technology is best? Wi-Fi 6 (802.11ax) or 5G?
Every time a new mobile phone standard is released, we see new claims about the “end of Wi-Fi.” When 3G was announced, there were promises that the advent of the technology would lead to the rise of W...
兰博 RF/Wirelessly
Question: When routing in protel DXP, when clicking on the pad to be routed, only the pad of the network is displayed
I would like to ask you: When I am routing in Protel DXP, when I click on the pad to be routed, only the pad of this network is displayed, and the pads of other networks disappear. When I exit the rou...
crdxq PCB Design
[Evaluation and experience of Zhongke Yihaiwei EQ6HL45 development platform] +03. Flowing light simulation and board test (zmj)
[Evaluation and experience of Zhongke Yihaiwei EQ6HL45 development platform] +03. Flowing light simulation and board test (zmj) The Zhongke Yihaiwei EQ6HL45 development platform provides a very rich i...
卿小小 Domestic Chip Exchange

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1680  1761  226  2379  1788  34  36  5  48  39 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号