Abstract: This design uses the Lingyang 16-bit single-chip microcomputer SPCE061A to control the stepper motor. The square wave with timing output through the IO port is used as the control signal of ...
Recently, I encountered such a problem during debugging: a set of parameters are pre-stored in the on-chip memory of the FPGA; during the operation of the system, some parameters will be read out, mod...
int main(void) { unsigned long ulUser0, ulUser1; unsigned char pucMACAddr[8]; unsigned long ulLoop; // // If running on Rev A2 silicon, turn the LDO voltage up to 2.75V. This is // a workaround to all...