EEWORLDEEWORLDEEWORLD

Part Number

Search

ROS-EDR6473/1+

Description
Voltage Controlled Oscillator, 91MHz Min, 101MHz Max
CategoryPassive components    oscillator   
File Size93KB,1 Pages
ManufacturerMini-Circuits
Websitehttps://www.minicircuits.com
Environmental Compliance  
Download Datasheet Parametric Compare View All

ROS-EDR6473/1+ Overview

Voltage Controlled Oscillator, 91MHz Min, 101MHz Max

ROS-EDR6473/1+ Parametric

Parameter NameAttribute value
Is it lead-free?Lead free
Is it Rohs certified?conform to
MakerMini-Circuits
Reach Compliance Codeunknown
Other featuresTAPE AND REEL
Maximum control voltage5 V
Minimum control voltage0.5 V
JESD-609 codee4
Modulation sensitivity4.5 MHz/V
Installation featuresSURFACE MOUNT
offset frequency1 kHz
Maximum operating frequency101 MHz
Minimum operating frequency91 MHz
Maximum operating temperature85 °C
Minimum operating temperature-55 °C
Oscillator typeVOLTAGE CONTROLLED OSCILLATOR
Output Power5 dBm
phase noise-98 dBc/Hz
physical size12.7mm x 12.7mm x 4.572mm
Maximum slew rate25 mA
Nominal supply voltage5 V
surface mountYES
Terminal surfaceGold (Au) - with Nickel (Ni) barrier

ROS-EDR6473/1+ Preview

Engineering Development Model
Voltage Controlled Oscillator
Important Note
This model has been designed, built and tested in our engineering
department. Performance data represents model capability.
At present it is a non-catalog model. On request, we can supply a
final specification sheet, part number and price/delivery information.
Please click "Back", and then click "Contact Us" for Applications support.
CASE STYLE : CK605
ROS-EDR6473/1
ELECTRICAL SPECIFICATIONS 50Ω
Parameter
Frequency
Tuning
Voltage
Power Output
Min.
91
0.5
Typ.
Max.
101
5
+5
-98
-123
-143
-157
0.05
0.5
4.5 -
-20.5
7000
5
Units
MHz
V
dBm
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
MHz
MHz/V
MHz/V
dBc
kHz
V
mA
Phase Noise
at 1 kHz offset
at 10 KHz offset
at 100 KHz offset
at 1000 kHz offset
Pulling at 12 dBr PK-PK all phases
Pushing at Vcc=5V±0.25V
Tuning Sensitivity
Harmonic Suppression
3 dB Modulation Bandwidth
Supply Voltage
Supply Current
MAXIMUM RATINGS
Operating Temperature
Storage Temperature
Absolute Supply Voltage (Vcc)
Absolute Tuning Voltage (Vtune)
-11
25
-55°C to 85°C
-55°C to 100°C
+7V
+7V
RF OUT
VCC
V-TUNE
GROUND
PIN CONNECTIONS
10
14
2
1,3,4,5,6,7,8,9,11,12,13,15,16
REV. X1
ROS-EDR6473/1
60522

ROS-EDR6473/1+ Related Products

ROS-EDR6473/1+ ROS-EDR6473/1
Description Voltage Controlled Oscillator, 91MHz Min, 101MHz Max Voltage Controlled Oscillator, 91MHz Min, 101MHz Max
Is it lead-free? Lead free Contains lead
Is it Rohs certified? conform to incompatible
Maker Mini-Circuits Mini-Circuits
Reach Compliance Code unknown unknown
Other features TAPE AND REEL TAPE AND REEL
Maximum control voltage 5 V 5 V
Minimum control voltage 0.5 V 0.5 V
JESD-609 code e4 e0
Modulation sensitivity 4.5 MHz/V 4.5 MHz/V
Installation features SURFACE MOUNT SURFACE MOUNT
offset frequency 1 kHz 1 kHz
Maximum operating frequency 101 MHz 101 MHz
Minimum operating frequency 91 MHz 91 MHz
Maximum operating temperature 85 °C 85 °C
Minimum operating temperature -55 °C -55 °C
Oscillator type VOLTAGE CONTROLLED OSCILLATOR VOLTAGE CONTROLLED OSCILLATOR
Output Power 5 dBm 5 dBm
phase noise -98 dBc/Hz -98 dBc/Hz
physical size 12.7mm x 12.7mm x 4.572mm 12.7mm x 12.7mm x 4.572mm
Maximum slew rate 25 mA 25 mA
Nominal supply voltage 5 V 5 V
surface mount YES YES
Terminal surface Gold (Au) - with Nickel (Ni) barrier Tin/Lead (Sn/Pb)
Does anyone know how to solve the DEFECT of AMAT HDP PSG at 0.13LG ILD?
After the 0.13LG ILD PSG PROCESS, a defect with a plain appearance is always detected by YE. After SEM CUT check, it is confirmed that the defect is in the film. I have been solving it for 3 years but...
zhb319 PCB Design
Interface issues
I made an interface using evc programming in wince, and found that the buttons on it are too small. I want to enlarge them, but the width of the combo box control cannot be changed, only the length. D...
gw1300 Embedded System
The battery of my Neo 18V electric drill is running out of power. I want to get a transformer to power it directly. Please help me!!!
As the title says: The battery of the Neo 18V hand drill has no power left. I want to get a transformer to directly power it (I guess my hand drill is fake). The battery shell says 18V. I charged the ...
v115488 Power technology
The continuous operation mode CCM and the interruption mode DCM of the inductor
The continuous operation mode CCM and the interruption mode DCM of the inductorThe continuous operation mode CCM and the interruption mode DCM of the inductor - in what applications should CCM or DCM ...
QWE4562009 Discrete Device
How is the AD of 2812?
It is OK for general use, but you cannot demand better performance than independent AD. When designing, you can carefully study the design documents of TI 2812AD.In addition, the AD performance of 280...
szgaoju Microcontroller MCU
About the Chinese version of wince5.0 English simulator
First of all, thank you very much for your help. My development tool is VS2005 and my handheld device is Casio DT-X7. Its operating system is WinCE5.0 English version. At present, I am using the simul...
yelingxin Embedded System

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 2152  2848  1189  768  1595  44  58  24  16  33 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号