EEWORLDEEWORLDEEWORLD

Part Number

Search

MAX8982A

Description
Power-Management ICs for ICERA E400 Platform 16 Programmable Voltage
File Size2MB,74 Pages
ManufacturerMaxim
Websitehttps://www.maximintegrated.com/en.html
Download Datasheet Compare View All

MAX8982A Overview

Power-Management ICs for ICERA E400 Platform 16 Programmable Voltage

19-5472; Rev 2; 4/11
TION KIT
EVALUA BLE
AVAILA
Power-Management ICs for
ICERA E400 Platform
Features
S
4 High-Efficiency Buck Converters
0.9V at 1.2A (1.3 for MAX8982P) for CORE with
DVS Function (0.6V
to 1.2V in 25mV Steps) and Slew Rate Control
1.8V at 600mA for System IO
3.2V at 600mA for All LDO Inputs (2.9V to 3.65V
in 50mV Steps) (MAX8982A/MAX8982P Only)
3.4V at 1.8A for GSM/WCDMA PA (3.0V to 3.75V
in 50mV Steps) (MAX8982A/MAX8982P Only)
S
9 LDO Linear Regulators
2.7V at 300mA on LDO1 for RF Transceiver
1.8V at 150mA on LDO2 for RF Transceiver
2.8V at 150mA on LDO3 for Analogue BB
0.9V at 50mA on LDO4 for BB PLL with the
Separate Input for a Higher Efficiency
3.0V at 150mA on LDO5 for SD Card
2.7V at 150mA on LDO6 for TCXO
1.8V or 3.0V at 150mA on LDO7 for SIM
3.0V at 150mA on LDO8 for USB with the
Separate Input (MAX8982A/MAX8982P Only)
0.9V at 50mA on LDO9 for BB with the Separate
Input for a Higher Efficiency
S
32 Programmable Voltage Options and External
Input on BUCK1 (0.9V Default) for DVS
S
16 Programmable Voltage Options for BUCK3
(MAX8982A/MAX8982P Only)
S
16 Programmable Voltage Options on BUCK4
(MAX8982A/MAX8982P Only)
S
Programmable Voltage Options for All LDOs
(LDO8 for MAX8982A/MAX8982P Only)
S
BUCK2, BUCK3 (MAX8982A/MAX8982P Only),
LDO3, and Internal 32kHz Clock Default On at
Initial Startup
S
All Buck Converters and LDOs are Enabled by
Either I
2
C or Power Request Control (PWR_REQ)
After Power-Up
S
3 Current Regulators with 8 Dimming Current
Options Up to 24mA with Embedded Flash Timer
General Description
The MAX8982A/MAX8982P/MAX8982X are complete
power-management ICs for the latest LTE/WCDMA/GSM/
GPRS/EDGE data card based on the new ICERA platform
(E400). The MAX8982A operates from a 4.1V to 5.5V
supply and contains four efficient step-down converters,
nine low dropout linear regulators (LDOs) to power all
RF and baseband circuitry, three current regulators with
programmable current up to 24mA and embedded flash
timers, and an I
2
C serial interface to program individual
regulator output voltages as well as on/off control for flex-
ibility. The linear regulators provide greater than 60dB
PSRR, less than 45FV of output noise, and minimal cross
coupling noise between LDOs.
The MAX8982X/MAX8982P operates from a 2.9V to 5.5V
supply. The MAX8982X has the same features as the
MAX8982A, except it does not have BUCK3, BUCK4,
and LDO8. The MAX8982P has the same features as the
MAX8982A.
All buck converters and LDOs are enabled/disabled by
either I
2
C or PWR_REQ control signal after power-up.
This feature provides more flexibility in system design.
MAX8982A/MAX8982P/MAX8982X
Applications
GSM, GPRS, EDGE, WCDMA, and LTE
Data Card with New ICERA Platform (E400)
Ordering Information
PART
MAX8982AEWO+T
MAX8982PEWO+T
MAX8982XEWO+T
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
42 WLP
42 WLP
-40°C to +85°C 42 WLP
+Denotes
a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel. These devices have a minimum order inc-
rement of 1k pieces.
_______________________________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.

MAX8982A Related Products

MAX8982A MAX8982XEWOT MAX8982AEWOT MAX8982PEWOT
Description Power-Management ICs for ICERA E400 Platform 16 Programmable Voltage Power-Management ICs for ICERA E400 Platform 16 Programmable Voltage Power-Management ICs for ICERA E400 Platform 16 Programmable Voltage Power-Management ICs for ICERA E400 Platform 16 Programmable Voltage
How to solve PIR false triggering
Dear forum elder brothers and sisters, I am recently making a light with photosensitive control + PIR human body induction, powered by three AA batteries connected in series. Recently, I have encounte...
风吹过北纬 MEMS sensors
Can you please help me see if the current is too small?
I want to ask if the current of the voltage-dividing optocoupler will be too small. I have simulated this circuit and manually soldered the board, and the results are consistent with the simulation re...
huzl Analog electronics
Vlogic pin problem of analog chip
The analog chip is powered by positive and negative 15V, but it needs a Vlogic power supply. How should this Vlogic be handled? Because the digital ground and analog ground are separated, how should t...
mazzz Analog electronics
New version forum, win8.1 trial report
[i=s]This post was last edited by Sur on 2013-12-23 10:20[/i] Let me first talk about the good things. The @ function has been added. Haha, I'll try it first@@Sur, the advanced mode is better than bef...
Sur Suggestions & Announcements
f2812 programming problem please help!
Dear brother, I have the same problem as you. After installing the Flash programming plug-in, when I used tools>Flash Programming to program, erase, programming, and verify were all successful, but th...
fuan1981 Microcontroller MCU
EEWORLD University ---- Reference Design for Industrial System Applications
Reference design for industrial system applications : https://training.eeworld.com.cn/course/176...
dongcuipin Talking

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 743  946  2820  2479  777  15  20  57  50  16 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号