BU-61703F3-120L datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> BU-61703F3-120L

BU-61703F3-120L: DescriptionMil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CQFP72, CERAMIC, QFP-72; CategoryThe embedded processor and controller Microcontrollers and processors; File Size577KB，54 Pages; ManufacturerData Device Corporation

Download Datasheet Parametric View All

BU-61703F3-120L Overview

Mil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CQFP72, CERAMIC, QFP-72

BU-61703F3-120L Parametric

Parameter Name	Attribute value
Is it lead-free?	Contains lead
Is it Rohs certified?	incompatible
Maker	Data Device Corporation
Parts packaging code	QFP
package instruction	QFF,
Contacts	72
Reach Compliance Code	compliant
Address bus width	5
boundary scan	NO
maximum clock frequency	20 MHz
letter of agreement	MIL-STD-1553A; MIL-STD-1553B; STANAG-3838
Data encoding/decoding methods	BIPH-LEVEL(MANCHESTER)
Maximum data transfer rate	0.125 MBps
External data bus width	16
JESD-30 code	S-CQFP-F72
JESD-609 code	e0
length	25.4 mm
low power mode	NO
Number of serial I/Os	2
Number of terminals	72
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	QFF
Package shape	SQUARE
Package form	FLATPACK
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
Certification status	Not Qualified
Filter level	MIL-STD-883
Maximum seat height	3.94 mm
Maximum supply voltage	3.6 V
Minimum supply voltage	3 V
Nominal supply voltage	3.3 V
surface mount	YES
technology	CMOS
Temperature level	MILITARY
Terminal surface	TIN LEAD
Terminal form	FLAT
Terminal pitch	1.27 mm
Terminal location	QUAD
Maximum time at peak reflow temperature	NOT SPECIFIED
width	25.4 mm
uPs/uCs/peripheral integrated circuit type	SERIAL IO/COMMUNICATION CONTROLLER, MIL-STD-1553

Preview

Download Datasheet

View All

Make sure the next

Card you purchase

has...

BU-61703/61705

Simple System RT (SSRT)

FEATURES

•

Complete Integrated Remote

Terminal Including:

Dual Low-Power 5V Only Transceiver

Complete RT Protocol Logic

•

Supports MIL-STD-1553A/B Notice 2,

STANAG-3838 RT, and

MIL-STD-1760 Stores Management

•

1.0 X 1.0 Inch, 72-pin Package

•

Choice of 5V or 3.3V Logic Power

•

Meets 1553A/McAir Response Time

Requirements

•

Internal FIFO for Burst Mode

Capability on Receive Data

DESCRIPTION

The BU-61703/5 Simple System RT (SSRT) MIL-STD-1553 terminals

provide a complete interface between a simple system and a MIL-

STD-1553 bus. These terminals integrate dual transceiver, protocol

logic, and a FIFO memory for received messages in a 1.0 inch square

ceramic package. The SSRT provides multi-protocol support of MIL-

STD-1553A/B, MIL-STD-1760, McAir, and STANAG-3838.

The SSRT's transceivers are completely monolithic, require only a

+5V supply, and consume low power. There are versions of the sim-

ple system RT available with transceivers trimmed for MIL-STD-1760

compliance, or compatible to McAir standards. As a means of further

reducing power consumption, the SSRT is available in versions with

its logic powered by +3.3V, or +5V. The SSRT can operate with a

choice of clock frequencies of 10, 12, 16, or 20 MHz.

The SSRT incorporates a built-in self-test (BIT). This BIT, which is

processed following power turn-on or after receipt of an Initiate self-

test mode command, provides a comprehensive test of the SSRT's

encoders, decoders, protocol, transmitter watchdog timer, and proto-

col. The SSRT also includes an auto-configuration feature.

The SSRT is ideal for stores and other simple systems that do not

require a microprocessor. To streamline the interface to simple sys-

tems, the SSRT includes an internal 32-word FIFO for received data

words. This serves to ensure that only complete, consistent blocks of

validated data words are transferred to a system.

•

16-bit DMA Interface

•

Auto Configuration Capability

•

Comprehensive Built-In Self-Test

•

Direct Interface to Simple

(Processorless) Systems

•

Selectable Input Clock:

10, 12, 16, or 20 MHz

FOR MORE INFORMATION CONTACT:

Data Device Corporation

105 Wilbur Place

Bohemia, New York 11716

631-567-5600 Fax: 631-567-7358

www.ddc-web.com

Technical Support:

1-800-DDC-5757 ext. 7234

2000 Data Device Corporation

Recommended Resources

Multifunctional coded remote control transmitter circuit

LV1010 internal schematic block diagram

217 basic working circuit

Inclination sensor thermal wire circuit diagram d

School bell analog circuit

Use color-changing light-emitting diodes as fuse indicator circuits

【NUCLEO-L552ZE Review】+ Various lighting patterns: The first step of the test is to light up the LED light, which has almost become an unchanging step. I was going to post the lighting and unboxing together, but I encountered the problem of not being ...; hujj stm32/stm8

Summary: About 2.4G NRF24L01 wireless module: Through the study and practice of the 2.4G NRF24L01 wireless module and the reference to the Chinese and English manuals of NRF24L01, the following summary is made. If you want to have a deeper unders...; Aguilera RF/Wirelessly

I opened two PCB files in the same project. Why is one error-free when importing the same netlist while the other has an error?: It reported a package error. I remember that I changed the package in sch yesterday. Today I opened it and found that it has changed back. I don't know what happened. And the problem is that the origi...; 拿得起铁 PCB Design

Single chip microcomputer and TCP/IP network (Ethernet protocol): [size=2]——--[/size][size=4]Ethernet protocol (used for 10MBPS Ethernet. The author refers to 10M Ethernet below, not 100M or 1000M Ethernet) ——There are two types of Ethernet protocols, one is IEEE802...; eeleader Industrial Control Electronics

How to use UART port to simulate SPI communication?: The Fujitsu 8-bit microcontroller I am using does not have a hardware SPI port, but has two UART ports. I would like to use one of them to simulate SPI communication. Is this feasible? How to do it? A...; double.chen Embedded System

How to configure BeagleBone's GPMC?: I recently want to connect BeagleBone to FPGA through the GPMC interface. I am not sure about the configuration process of GPMC. Does anyone have experience in this area?...; chenzhufly DSP and ARM Processors

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components