TDA18252HN
Cable Silicon Tuner
Rev. 3 — 16 August 2010
Product data sheet
1. General description
The TDA18252HN is a single-chip direct conversion Silicon Tuner IC designed for
digital-only cable applications.
The TDA18252HN integrates a loop-through feature that enables the RF input signal to be
used as an output for another downconverter. This feature simplifies the application and
reduces the Bill Of Materials (BOM).
•
The TDA18252HN ensures a low system cost as:
–
Costly components such as low-noise amplifiers, Surface Acoustic Wave (SAW)
filters and incremental crystal oscillators are eliminated from the system BOM
•
The TDA18252HN high-performance Silicon Tuner meets today’s digital cable TV
reception needs with:
–
Low power consumption
–
High linearity
–
Low noise figure
•
The TDA18252HN ensures ease of use with:
–
Easy on-board integration
–
Efficient and effective PCB design
–
Reduced external components
2. Features and benefits
Single 3.3 V power supply
Low power consumption
Extended frequency coverage of up to 1002 MHz
Digital cable reception for STB
RF loop-through
Fully integrated IF selectivity; eliminating the need for external SAW filters
Alignment free
Fully integrated oscillator with no external components
Integrated wideband gain control
Crystal oscillator output buffer (16 MHz) for single crystal applications
I
2
C-bus provides:
3.3 V and 5 V microcontroller compatibility
Received Signal Strength Indicator (RSSI) data access
Die temperature sensor data access
NXP Semiconductors
TDA18252HN
Cable Silicon Tuner
9. Legal information
9.1
Data sheet status
Product status
[3]
Development
Qualification
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Document status
[1][2]
Objective [short] data sheet
Preliminary [short] data sheet
Product [short] data sheet
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL
http://www.nxp.com.
9.2
Definitions
Draft —
The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet —
A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification —
The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications —
Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values —
Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale —
NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at
http://www.nxp.com/profile/terms,
unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license —
Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control —
This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
© NXP B.V. 2010. All rights reserved.
9.3
Disclaimers
Limited warranty and liability —
Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the
Terms and conditions of commercial sale
of NXP Semiconductors.
Right to make changes —
NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use —
NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
TDA18252HN_SDS
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 16 August 2010
4 of 6
NXP Semiconductors
TDA18252HN
Cable Silicon Tuner
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Quick reference data —
The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Non-automotive qualified products —
Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
9.4
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
I
2
C-bus —
logo is a trademark of NXP B.V.
Silicon Tuner —
is a trademark of NXP B.V.
10. Contact information
For more information, please visit:
http://www.nxp.com
For sales office addresses, please send an email to:
salesaddresses@nxp.com
TDA18252HN_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 3 — 16 August 2010
5 of 6
京公网安备 11010802033920号
EEWORLD
