This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it
other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
1. Proper current derating must de observed to maintain junction temperature below the maximum.
2. All products not sensitive to ESD damage (6000 Volts by HBM condition).
3. Be careful with powered up current limited power supply, because of current spikes during power up and / or connection. Best practice is to
connect the LED then turn up the voltage gradually. People building their own power supplies should design for minimum current spikes
during power up and connection.
4. For best results the customer needs to provide proper control of the thermal path, protect against electrical overstress conditions and ensure
the emitters are properly attached to the mcpcb / heat sink.
Important Notice:
This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it
other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
703-0150_3W RGB High Power LED | 13 July 2012 9:22 AM
3W RGB High Power LED
Red Characteristics at If=350mA (Ta=25°C):
Parameter
Luminous Flux
Dominant Wavelength
Forward Voltage
View Angle
Thermal resistance Junction to Case
Symbol
Φv¹
λd
Vf
2θ½
Rθ
j
-
c
Value
Min.
-
620
2.0
120
13
Typ.
38
625
2.5
Max.
-
630
3.0
Unit
lm
nm
V
deg
°C
/ W
Green Characteristics at If=350mA (Ta=25°C):
Parameter
Luminous Flux
Dominant Wavelength
Forward Voltage
View Angle
Thermal resistance Junction to Case
Symbol
Φv¹
λd
Vf
2θ½
Rθ
j
-
c
Value
Min.
-
520
3.0
120
10
Typ.
71
525
3.5
Max.
-
530
4.0
Unit
lm
nm
V
deg
°C
/ W
Blue Characteristics at If=350mA (Ta=25°C):
Parameter
Luminous Flux
Dominant Wavelength
Forward Voltage
View Angle
Thermal resistance Junction to Case
Symbol
Φv¹
λd
Vf
2θ½
Rθ
j
-
c
Value
Min.
-
460
3.0
120
10
Typ.
21
465
3.5
Max.
-
475
4.0
Unit
lm
nm
V
deg
°C
/ W
Important Notice:
This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it
other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
703-0150_3W RGB High Power LED | 13 July 2012 9:22 AM
3W RGB High Power LED
Electrical & Optical Bin Group
Flux Ranks
Colour
Group
L
M
N
P
Red, Green & Blue
Q
R
S
T
U
Flux (lm)
10.7 ~ 13.9
13.9 ~ 18.0
18.0 ~ 23.5
23.5 ~ 30.5
30.5 ~ 39.6
39.6 ~ 51.5
51.5 ~ 67.0
67.0 ~ 87.0
87.0 ~ 113.0
Wavelength Ranks
Colour
Red
Green
Group
W
15
16
17
3
Blue
4
5
WD (nm)
620 ~ 630
520 ~ 525
525 ~ 530
530 ~ 535
460 ~ 465
465 ~ 470
470 ~ 475
Important Notice:
This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it
other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
703-0150_3W RGB High Power LED | 13 July 2012 9:22 AM
3W RGB High Power LED
Forward Voltage Ranks
Colour
Group
V01
V02
Red
V03
V04
V05
V01
V02
Green
V03
V04
V05
V01
V02
Blue
V03
V04
V05
Vf (V)
1.8 ~ 2.0
2.0 ~ 2.2
2.2 ~ 2.4
2.4 ~ 2.6
2.6 ~ 2.8
3.0 ~ 3.2
3.2 ~ 3.4
3.4 ~ 3.6
3.6 ~ 3.8
3.8 ~ 4.0
3.0 ~ 3.2
3.2 ~ 3.4
3.4 ~ 3.6
3.6 ~ 3.8
3.8 ~ 4.0
Important Notice:
This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it
other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
I am designing a VGA image display, and I am using a custom ROM. Now the problem is the pixel acquisition, that is, how to get the pixel points in the .MIF or .HEX file when customizing the ROM. I hop...
I'm just looking for something to share. On May 25, Datang issued a notice announcing the establishment of Lingsheng with Qualcomm. However, there have been a lot of debates online in the past two day...
[size=4]1) The basic units of reading and writing flash memory chips are different [/size] [size=4] The application program uses "word" as the basic unit for NOR chip operations. In order to facilitat...
[font=新宋体][size=4]As a student, I often came into contact with Altera's FPGA and CLONE series during my undergraduate studies. Later, my friend said that Xilinx's FPGA has better performance. [/size][...
Current-mode PWM is developed on the basis of voltage-mode PWM. It adds a current feedback link to the original voltage loop to form a voltage-current dual closed-loop control. The current-mode contro...
1. Background
In the DIY power supply, the project I am working on now is based on TI's PFC+ACI, removing its ACI part and adding our BUCK power supply part. The original BUCK output uses CLA, which h...
Today's computer peripherals are pursuing high speed and high versatility. In order to meet user needs, seven companies led by Intel launched the USB (Universal Serial Bus) bus protocol in 1994, wh...[Details]
Hardware designers have begun to adopt FPGA technology in high-performance DSP designs because it can provide 10-100 times faster computing than PC-based or microcontroller-based solutions. Previou...[Details]
The solidification and modularization of intelligent video analysis algorithms are the current trends in the application of intelligent video analysis technology. It perfectly combines intelligent ...[Details]
1 Introduction
Intelligent control instruments are one of the most commonly used controllers in industrial control. They are mainly aimed at a specific parameter (such as pressure, tempera...[Details]
VP2188 is a color STN LCD module produced by Jingdian Pengyuan. This module is a dot matrix transmissive color STN display screen with a color scale of 65 k colors and white LED backlight. Its core...[Details]
OC faults may be the most frequent and the most frequent of all faults in the inverter. They alarm during the startup process, during the shutdown process, during operation, and even when powered o...[Details]
Preface
In recent years, white light LEDs have gradually replaced incandescent bulbs and fluorescent lamps because they have unparalleled advantages over traditional light sources in terms...[Details]
With the widespread application of new services and technologies in the communications industry, the scale and capacity of operators' network construction are getting larger and larger, and the ris...[Details]
Traditional
virtual instruments
consist of a data acquisition
board
based on PCI bus and
corresponding software. However, with
the rapid development of
computer
network techno...[Details]
0 Introduction
With the rapid development of social economy and science and technology, electric locomotives, subways and electric vehicles will be widely used. The power conversion and cont...[Details]
1 Embedded Systems
Embedded System refers to a collection of computer hardware and software with specific functions or purposes, which is divided into embedded software system and embe...[Details]
In recent years, with the increasing maturity of LED technology, LED light sources have been increasingly widely used due to their advantages of using low-voltage power supply, low energy consumpti...[Details]
1. Project Introduction
Beijing Benz-Daimler Chrysler Co., Ltd. is a joint venture between Beijing BAIC Group and Benz-Daimler Chrysler. In October 2005, it started to build a new automobile ...[Details]
Synchronous buck designs are becoming increasingly difficult, and the selection of suitable ICs is becoming quite narrow. This Design Idea combines a current-mode PWM IC used in a flyback regulator...[Details]
Some people think: as long as the program runs well, it doesn't matter how the original program is written. But this is absolutely not the case. Software is not completed in one go, and it is neces...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
