REVISION FB
DO NOT
SCALE FROM
THIS PRINT
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. PARTS MAY BE CUT TO POSITION.
No OF POSITIONS
3. MAXIMUM CUT FLASH: .015[0.38],
-02 THRU -50
LOOSE FLASH MUST BE REMOVED.
(PER ROW)
4. MINIMUM PUSHOUT FORCE: 1.0 LB.
LEAD STYLE
5. MEASURED AT BEND RADIUS, NOT AT END OF PIN.
6. TUBE ONLY -04 THROUGH -50 POSITIONS (SEE TABLE 2).
-01: .120 [3.05]
7. SHEAR TAILS TO DIMENSION SHOWN.
-02: .075 [1.91]
8. MAXIMUM BURR ALLOWANCE: .003 [0.08]
-03: .065 [1.65]
9. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL.
-04: .150 [3.81]
10. FILL WITH ALIGNMENT PIN HOLES TO TAIL SIDE.
-05 .170 [4.32]
11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, LOCKING CLIPS
-14: .150 [3.81](NOT AVAILABLE
ARE NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
WITH -SM, FM, LM PLATING
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH LOCKING CLIPS.
OPTIONS)
12. VOIDS MAY OR MAY NOT BE PRESENT ON POSITIONS 5 THRU 8 AND CAN
BE MIXED WITHIN AN ORDER.
PLATING SPECIFICATION
13. ON LEAD STYLES -02 THROUGH -03 THE T-1S15-18-XXX CAN
BE SUBSTITUTED FOR T-1S15-16-XXX.
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
14. ON LEAD STYLES -01 AND -04, T-1S15-17 CAN BE
MATTE TIN ON TAIL
SUBSTITUTED FOR T-1S15-15-XXX.
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
15. NO TIN PLATING ALLOWED ON THE POST FOR
MATTE TIN ON TAIL
LEAD STYLES -01, -02, -03 & -04.
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
C
-H: 30µ" GOLD IN CONTACT AREA,
No OF POS x .0500
+.005
[
+0.13
]
3µ" GOLD ON TAIL
-.010 -0.25
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
(No OF POS x .0500[1.27]) - .050[1.27]
MATTE TIN ON TAIL
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
02
50
MATTE TIN ON TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,
.135 3.43
TIN/LEAD (90/10+/-5%) TAIL
-G: 10µ" GOLD IN CONTACT AREA,
REF
3µ" GOLD ON TAIL
FTSH-1XX-XX-XXX-DV-XXX-XXX
01
FTSH-50-D
.016 0.41 SQ
REF (TYP)
"B"
CONTACT AREA
(SEE NOTE 9 & TABLE 1)
49
2 MAX SWAY
(EITHER DIRECTION)
2 MAX SWAY
(EITHER DIRECTION)
SEE TABLE 1
C
"A" C
TAIL OPTION
-DV: DOUBLE VERTICAL
-P: PICK & PLACE PAD (4 POS MIN)
(SEE FIG 11, SHT 4 & TABLE 5)
-TR: TAPE & REEL PACKAGING
-ES: END SHROUDS (SEE FIG 6, SHT 3)
(MOLDED IN 5 POS MIN; -02 & -03 LEAD STYLE ONLY)
(SNAP SHROUDS 9 POS MIN; -02 & -03 LEAD STYLE ONLY)
(MUST USE FTSH-50-D)
-EJ: EJECTOR SHROUDS: SEE FIG 4, SHT 2)
(10 POS MIN; -01 LEAD STYLE ONLY)(MUST USE FTSH-50-D)
-EJM: EJECTOR SHROUDS WITH MOLDED ALIGNMENT PIN
(SEE FIG 5, SHT 2; 10 POS MIN; -01 LEAD STYLE ONLY)
(NOT VALID WITH -A OPTION)(MUST USE FTSH-50-D)
-EJC: EJECTOR SHROUDS WITH LOCKING CLIP
(SEE FIG 5, SHT 2 & NOTE 11)
(10 POS MIN; -01 LEAD STYLE ONLY; NOT VALID WITH -A
OPTION)
(MUST USE FTSH-50-D)
-EC: LOCKING CLIP (SEE FIG 7, SHT 3 & NOTE 11)
(9 POS MIN; -02 & -03 LEAD STYLE ONLY)(MUST USE FTSH-50-D)
-EP: GUIDE POST (SEE FIG 8, SHT 3; 9 POS MIN; -02 & -03 LEAD STYLE
ONLY)
(USE ONLY WHEN MATING WITH CLP)(MUST USE FTSH-50-D)
-EL: BOARD LOCK (SEE FIG 9, SHT 3)
(9 POS MIN; -02 & -03 LEAD STYLE ONLY)
(USE ONLY WHEN MATING WITH CLP)(MUST USE FTSH-50-D)
-EPC: GUIDE POST & LOCKING CLIP
(SEE FIG 10, SHT 3 & NOTE 11; USE ONLY WHEN MATING WITH CLP)
(9 POS MIN; -02 & -03 LEAD STYLE ONLY; NOT VALID
WITH -A OPTION)(MUST USE FTSH-50-D)
-A: ALIGNMENT PIN (MOLDED OR STAKED; SEE FIG 3, SHT 2)
(MOLDED: 3 POS MIN; STAKED: 6 POS MIN)
(SAMTEC DISCRETION ON WHICH -A PIN USED)
(MUST USE FTSH-50-D)
-K: KEYING OPTION FOR MATING WITH FFSD
(SEE TABLE 3, SHT 2; 05 THRU 25 AVAILABLE AS STANDARD)
(POSITION 13, 17, 20 & 25 AVAILABLE WITH -EJ OPTION)
(LEAD STYLE -01 ONLY, SEE FIG 2, SHT 2 & NOTE 12)
(ALIGNMENT PIN AVAILABLE WITH -K OPTION BUT MUST BE MOLDED)
(MUST USE FTSH-XX-CN-XX)
-M: METAL PICK & PLACE PAD (5 POS MIN; USE MPP-22-5)
*
(SEE FIG 12, SHT 4; NOT AVAILABLE WITH -K OPTION)
OPTIONS
POLARIZING OPTION
C
.050±.008 1.27±0.20
XXX INDICATES POSITION TO BE OMITTED
(NOT AVAILABLE WITH EXX OPTIONS)
(ONLY AVAILABLE WITH -F, -FM, -L, -LM PLATING OPTIONS)
2 MAX SWAY
(EITHER DIRECTION)
* = NOT ENGINEERING APPROVED
90°±3°
SEE NOTE 3
(2 PLCS)
.099 2.51
REF
.004[.10]
FTSH-1XX-XX-XXX-DV SHOWN
.115
- .003
2.92
- 0.08
(SEE NOTE 5)
.23 5.8
(SEE NOTE 7)
*
PROPRIETARY NOTE
*
+.005
+0.13
PATENT NUMBERS
5713755 / 5961339
FIG 1
SEE NOTE 8
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
HAND FILL USING T-1S40
.230 5.84 REF
.XX: .01 [.3]
1
.XXX: .005 [.13]
.XXXX: .0010 [.025]
ANGLES
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 5:1
INSULATOR: LCP UL 94 VO
TERMINAL: PHOSPHOR BRONZE
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP
* = SEE NOTE 13
*** = SEE NOTE 14
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW
BY:
PURVIS
FTSH-1XX-XX-XXX-DV-XXX-XXX
10/12/1995
SHEET
1
OF
5
REVISION FB
-K OPTION
(LEAD STYLE -01 ONLY)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(POSITION 13, 17, 20 & 25 AVAILABLE WITH
-EJ OPTION)
((No OF POS x .0500[1.270])
- .003[.08])±.006[0.15]
FIG 2
-EJ OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(-01 LEAD STYLE ONLY)
USE SUB-FTSH-EJEHA
(2 REQ'D PER ASSEMBLY, EACH
USES 1 EHA-02 & 1 FTSH-EJ)
.222 5.65
REF
FIG 4
SCALE 2 : 1
02
.135 3.43
REF
01
C
L
.440 11.18
REF
.085 2.16 REF
.200 5.08 REF
.126 3.20 REF
(No OF POS x .050[1.27])+.621[15.77]
±.010[0.25] C
(No OF POS x .050[1.27])+.772[19.61] REF
FTSH-50-D
.392 9.96
REF
SEE NOTE 12
FTSH-50-CN-XX
-EJ OPTION (SHROUDS OPEN)
.076 1.93 REF
-A OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(6 POSITION MINIMUM FOR STAKED ALIGNMENT PINS)
(3 POSITION MINIMUM FOR MOLDED ALIGNMENT PINS)
C
L
FTSH-50-D
(SEE NOTE 10)
.034 0.86
C
FIG 3
C
L
-EJC & -EJM OPTIONS
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 4)
(-01 LEAD STYLE ONLY)
USE SUB-FTSH-EJEHA-A
USE SUB-FTSH-EJEHA
(2 REQ'D PER ASSEMBLY, EACH
(2 REQ'D PER ASSEMBLY, EACH
USES 1 EHA-02 & 1 FTSH-EJ-A)
C
USES 1 EHA-02 & 1 FTSH-EJ)
L
FIG 5
SCALE 2 : 1
(No OF POS - 2)
x .050[1.27]
C
C
L
SM-A9H
.035 0.89
REF
(STAKED ALIGNMENT PINS)
2 MAX SWAY
(EITHER DIRECTION)
LC-05-TM
-EJC
.085
- .000
2.16
+.005
+0.13
0.00
FTSH-50-D-XX
.034 0.86
.050 1.27 REF
(No OF POS - 2)
x .050[1.27]
FULL R
(MOLDED ALIGNMENT PINS)
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW
.010 0.25 REF
-EJC
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
.035 0.89
REF
-EJM
PROPRIETARY NOTE
*
.05 1.3
REF
-EJM
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
.035 0.89
REF
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP
DWG. NO.
FTSH-1XX-XX-XXX-DV-XXX-XXX
PURVIS
10/12/1995
SHEET
2
OF
5
BY:
REVISION FB
-ES OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(USE -02 OR -03 LEAD STYLE ONLY)
(9 POS MIN FOR SNAP SHROUDS)
(5 POS MIN FOR MOLDED SHROUDS)
.265 6.73 REF
.075 1.91 REF
.139 3.53
REF
.120 3.05 REF
FIG 6
-EP OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)
(USE ONLY WHEN MATING WITH CLP)
(No OF POS x .050[1.27])+.231[5.87]±.008[0.20]
(No OF POS x .050[1.27])+.156[3.96] REF
FTSH-EP
C
.032[0.81] REF
CHAMFER
FIG 8
02
.188 4.78
REF
C
(No OF POS x .050[1.27])+.101[2.57]±.008[0.20]
ES-FTSH
.168 4.27
REF
.194 4.91
01
.288 7.32
REF
.314 7.96
-EL OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)
(USE ONLY WHEN MATING WITH CLP)
(No OF POS x .050[1.27])+.257[6.53] REF
(No OF POS x .050[1.27])+.153[3.89] REF
FTSH-EL
.293 7.44
REF
.125 3.18
REF
FIG 9
(SNAP SHROUDS)
FTSH-50-D
(SEE NOTE 10)
.319 8.09
(No OF POS (PER FINISHED ASSEMBLY)
+2) X .050 [1.27] REF
02
.1750 4.445
REF
01
FTSH-49-ES-XX-X
.0960 2.438
REF
(No OF POS x .050[1.27])+.223[5.66] .008[0.20]
-EPC OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)
(USE ONLY WHEN MATING WITH CLP)
(No OF POS x .050[1.27])+.231[5.87]±.008[0.20]
(No OF POS x .050[1.27])+.156[3.96] REF
C
.032[0.81] REF
CHAMFER
FIG 10
.178 4.51
REF
.075 1.91 REF
.0990 2.515 REF
.288 7.32
REF
.120 3.05 REF
FTSH-EP
(MOLDED SHROUDS)
-EC OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)
(No OF POS x .050[1.27])+.131[3.32]±.008[0.20]
.280 7.11
REF
C
.314 7.96
FIG 7
LC-05-TM
(No OF POS x .050[1.27])+.079[2.01]±.008[.20]
.055 1.40
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
.055 1.40
FTSH-EC
LC-05-TM
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP
(No OF POS x .050[1.27])+.079[3.30]±.008[0.20]
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW
BY:
PURVIS
FTSH-1XX-XX-XXX-DV-XXX-XXX
10/12/1995
SHEET
3
OF
5
REVISION FB
"M"
.20 5.1
REF
.13 3.3 REF
.230 5.84
REF
.065 1.65 REF
.060 1.52 REF
.13 3.3
REF
"P"
.16 4.1
REF
PPP-25-KT
PPP-25
"M" = No OF POSITIONS x .0500 [1.270]
"P" ={("M" -.200 [508]) / 2} .020 [.51]
-P OPTION
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
FIG 11
-P
.23 5.8 REF
C
L
FTSH-50-CN-XX
FTSH-50-D
PPP-25-NT
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 2)
-K-P-TR
*MOLDED SHROUD ONLY
** USE PPP-25-NT WITH -TR
-P-TR
PACKAGING ONLY
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
.32 8.1
REF
PPP-41
.16 4.1
REF
.32 8.1
REF
NOTE: TAPE & REEL ORIENTATION:
POLARIZATION NOTCH TO THE RIGHT
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIGS 4 & 5)
-EJ-P & -EJX -P
"M" REF
*-M: METAL PICK & PLACE PAD
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(NOT AVAILABLE WITH -K OPTION)(5 POS MIN)
* = NOT ENGINEERING APPROVED
"P"
FIG 12
USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
TAPE & REEL VIEW
.250 6.35
REF
.100 2.55 REF
MPP-22-5
"B"
FTSH-50-D
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP
DWG. NO.
"M" = No OF POSITIONS x .0500[1.270]
"P" = {("M" - .250[6.35]) / 2} ± .020[0.51]
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW
SHEET SCALE: 3:1
BY:
PURVIS
FTSH-1XX-XX-XXX-DV-XXX-XXX
10/12/1995
SHEET
4
OF
5
REVISION FB
PT-FTSH004-DV-EX-A-P-M
PT-FTSH002-DV-A-P-M
TUBE VIEWS
FIG 13
PT-FTSH006-DV-EJC-K-P
PT-FTSH002-DV-A-P-M
PT-FTSH002-DV-A-P-M
PT-FTSH004-DV-EX-A-P-M
-DV
(NONE)
PT-FTSH007-DV-K-P
PT-FTSH007-DV-K-P
-ES-P, -ES-A-P
-ES, -ES-A
-A, -A-P
-DV, -P
PT-FTSH003-DV-EJC-K
-EJ, EJX AND -EJ-X
-K-P
(FOR -01 LEAD STYLE ONLY)
-K, -K-A
ALL -EJ-K OPTIONS
"A" - .034 0.864
"A" - .034 0.864
"A" - .034 0.864
"C" REF
(SEE TABLE 1)
.125±.010 3.18±0.25
(SEE NOTE 7)
.050±.005 1.270±0.127
IN PROCESS 2
IN PROCESS 1
W/O A PINS
W/O A PINS
IN PROCESS 3
W/O A PINS
"A" - .084 2.134
"A" - .084 2.134
"A" -.084[2.134]
"C" REF
(SEE TABLE 1)
.175±.010 4.445±0.254
(SEE NOTE 7)
.100±.005 2.540±0.127
IN PROCESS 1
WITH A PINS*
WITH A PINS*
* = FOR -01, -04, -05 AND -14 LEAD STYLES ONLY
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW
IN PROCESS 2
IN PROCESS 3
WITH A PINS*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP
DWG. NO.
IN-PROCESS VIEWS ARE FOR HANDFILL ONLY
FTSH-1XX-XX-XXX-DV-XXX-XXX
PURVIS
10/12/1995
SHEET
5
OF
5
BY:
Embedded System
京公网安备 11010802033920号
EEWORLD
