EEWORLDEEWORLDEEWORLD

Part Number

Search

PH1-MLHLC292N

Description
Transponder, 10709Mbps(Tx), 10709Mbps(Rx), LC/SPC Connector,
CategoryWireless rf/communication    Optical fiber   
File Size240KB,6 Pages
ManufacturerLumentum Operations LLC
Download Datasheet Parametric View All

PH1-MLHLC292N Overview

Transponder, 10709Mbps(Tx), 10709Mbps(Rx), LC/SPC Connector,

PH1-MLHLC292N Parametric

Parameter NameAttribute value
MakerLumentum Operations LLC
Reach Compliance Codecompliant
Other featuresIT ALSO OPERATE FROM 1280NM TO 1600NM
body height13.2 mm
Body length or diameter84.1 mm
Connection TypeLC/SPC CONNECTOR
Data rate (receive)10709 Mbps
Data rate (send)10709 Mbps
Emitter/Detector TypeAVALANCHE PHOTODIODE
Fiber optic equipment typesTRANSCEIVER, TRANSPONDER
Nominal operating wavelength1535 nm
Nominal optical power output2.511 mW
minimum return loss-27 dB
Sensitivity-24 dBm
COMMUNICATIONS MODULES & SUBSYSTEMS
10 Gb/s TDM/DWDM 300 Pin SFF MSA SR2/IR2/LR2 Transponder
PH1 Series
Key Features
• Three configurations supporting SR2/IR2/LR2 applications
• Supports dense wavelength division multiplexing
(DWDM) applications (without wavelocker)
• Microprocessor controls to support I2C
• Integrated 16:1/1:16 mux/demux
• Small form factor package (2.2" x 3.0" x 0.53") for high
density applications
• Low power consumption: 4.8 W typical, 6.8 W maximum
for TDM applications
• 70 °C maximum operating temperature
• High sensitivity PIN or APD receivers
• SONET, FEC, Ethernet and Multirate Capable Versions
• Forward, counter and line timing clocking modes
Applications
Telecommunications
Metropolitan Area Networks
Subscriber loop
Intra-office SONET/SDH
High bit-rate data communications
JDSU 10 Gb/s PH1 Series transponders are intended for 1550 nm system
applications with reaches of up to 80 km. The series includes three different
transponders for SR2 (25 km), IR2 (40 km), and LR2 (80 km) TDM or DWDM
applications. Each transponder accepts 16 bits of parallel digital data and converts
it to a 10 Gb/s NRZ modulated optical signal. It also accepts a 10 Gb/s NRZ
modulated optical signal and converts it into 16 bit wide parallel digital data.
The PH1 series offers low DC power dissipation and is available in either a small
form factor package (2.2 x 3 x 0.53 inches) or in a larger footprint (3.5 x 4.5 x 0.53
inches) package, depending on system thermal performance requirements. The
transmit design uses an Electro-Absorptive Modulated Laser (EML) which,
depending on the configuration, produces an average output power of between
-4 dBm to 2 dBm (EOL). A PIN (-17 dBm typical sensitivity) or APD (-24 dBm
typical sensitivity) receiver is available, based on system configurations.
JDSU PH1 Series transponders are designed to support the following data rates:
9.953 Gb/s (SONET), 10.3125 Gb/s (Ethernet), 10.664 Gb/s (FEC Encoded),
10.709 Gb/s FEC, or 11.09 Gb/s EFEC. They meet all applicable SONET/SDH standards.
Compliance
• Telcordia GR-253-Core
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
485 infrared communication problem
PPC has not done any development in this area. After reading some information, I feel that it can only be operated using the original IR method. It is easy to read and write data to the ordinary seria...
qiuliang012 Embedded System
MSP430 Tutorial 16: MSP430 MCU Development Summary
1. #i nclude<> means to be in the editor setting directory, #i nclude "" means to be in the current project directory. 2. To call a function in another file, put the function file in the current proje...
qinkaiabc Microcontroller MCU
I would like to ask a question about synplify comprehensive constraints?
XD I am using FPGA to verify the design and using synplify primer to synthesize the design (first time using). Now I have found such a problem. Please help me analyze it:There are two clocks in my des...
eeleader-mcu FPGA/CPLD
74HC164 and 74HC138 drive digital tubes together
I want to use a 74hc164 to drive 4 8-bit digital tubes and use a 38 decoder to select segments! ! I wonder if this is feasible? Does anyone have any suggestions? Thanks for sharing! ! !...
fefefe MCU
PIC16F877 and ds1302 driver? ? ? ? Use 12864 display, protues simulation
#include#define uchar unsigned char #define uint unsigned int #define nop() asm("nop") #define ds1302_sec_add 0x80 //Seconds data address #define ds1302_min_add 0x82 //Minutes data address #define ds1...
liujun00 Microchip MCU
Ask a question about ARM interrupt!!!
;/* EXCEPTION HANDLER VECTOR TABLE */ MAP DRAM_BASE HandleReset # 4 HandleUndef # 4 HandleSwi # 4 HandlePrefetch # 4 HandleAbort # 4 HandleReserv # 4 HandleIrq # 4 HandleFiq # 4 Then define a continuo...
xuxu123456 Embedded System

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 950  1659  66  857  1580  20  34  2  18  32 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号