5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Tight stability performance
(+/-0.3 ppm) over Industrial Temperatures (-40 °C to +85 °C)
(+/-0.2ppm) over Commercial Temperatures (0 to 70C)
Available in both 10 and 4/5 pads configurations
3.0 V, 3.3 V and 5.0 V versions
Low phase noise and Excellent G-Sens performance: 1.5ppb/G
Tri-state Function available
N (10 Pad)
Package Option
Product Description
MtronPTI’s M611x Series TCXO’s and TCVCXO’s provide design engineers with low voltage, surface mount products
with extremely tight stability (to ±0.2 ppm) over temperature and time. Specially processed crystals enable the M611x to
achieve consistent long-term stability and minimal frequency shift after reflow. This processing also achieves excellent
g-sensitivity (1.5 ppb/g). The low phase noise (-155 dBc/Hz at 100 kHz) makes the M611x ideal for those design
engineers working on all types of systems as the reference timing source. With two standard package configurations,
MtronPTI can support the original industry standard 10 pad as well as the newer 4/5 pad topology (4 pad is without
Tristate function and 5 pad is with Tristate function).
Product Applications
The M611x Series is ideally suited for a wide range of applications such as GPS, military, avionics, test and measurement,
WLAN, WiMax base stations (see Fig 2.), point to point/multi-point radios, medical equipment, frequency synthesis, frequency
translation and land mobile radio. Standard output for the M611x series is HCMOS compatible or clipped sinewave. The
product is ideally suited for battery and remote applications where it draws as little as 1.5 mA of current with a 3.3 volt supply
at 13 MHz. This low power consumption provides an advantage over similarly specified ovenized oscillators for power-
sensitive applications. The M611x series offers ±9.2 ppm minimum pull range with excellent tuning linearity performance for
critical PLL applications. This series is available in frequencies from 8 to 40MHz and selectively to 52 MHz.
Product Ordering Information
M6110Sxxx, M6111Sxxx & M6112Sxxx - Contact factory for datasheets.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Revision: 1-5-11
M611x Series
Performance Characteristics
Parameter
Frequency Range
Operating Temperature
Storage Temperature
Frequency Tolerance @ +25°
C
Frequency Stability
Stability Vs. Reflow
Frequency Vs. Supply
Frequency Vs. Load
Aging (First Year)
Aging (First Year)
Aging (10 Year)
Aging (10 Year)
Supply Voltage Tolerance
Supply Current (I
D
)
Symbol
F
O
T
A
T
STG
Min.
8
-40
-55
-1.0
-1.0
Typ.
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Max.
52
+85
+125
+1.0
Units
MHz
°
C
°
C
ppm
Conditions/Notes
Contact factory above 40 MHz
See Ordering Information
For TCXO only
(Fmax – Fmin)/2
For 5% supply voltage variation
For 5% load variation
F
0
< 20 MHz
F
0
> 20 MHz
F
0
< 20 MHz (Includes first year)
F
0
> 20 MHz (Includes first year)
See Ordering Information
HCMOS output at 13 MHz
HCMOS output at 26 MHz
HCMOS output at 52 MHz
Clipped sinewave output at 13 MHz
Clipped sinewave output at 26 MHz
Clipped sinewave output at 52 MHz
I
OH
/I
OL
= ± 4 mA, Vs = +3.0 V
I
OH
/I
OL
= ± 4 mA, Vs = +3.0 V
F
o
< 40 MHz
F
o
> 40 MHz
Ref. to ½ V
S.
HCMOS only
Ref. 10% to 90%. HCMOS only
HCMOS output
Clipped sinewave output
Over Control Voltage Range
For V
S
= 3.0
For V
S
= 3.3
For V
S
= 5.0
-1.0
-2.0
-3.0
-5.0
-5.0
Output Logic Levels
(HCMOS)
Output Level
(Clipped Sinewave)
Waveform Symmetry
Rise/Fall Time
Output Load
Frequency Adjustment
Control Voltage Range
V
OL
V
OH
80
1.0
0.8
40
Input Leakage Current
Input Resistance
Linearity
Modulation Bandwidth
Tristate Function
Tristate Leakage Current
Phase Noise
(Typical 10 MHz CMOS)
±9.2
0.3
0.3
0.5
-50
100
2 kHz
70
-100
See Ordering Information
+1.0
ppm
±0.02
±0.1
ppm
±0.02
±0.1
ppm
+1.0
ppm
+2.0
ppm
+3.0
ppm
+5.0
ppm
+5.0
%
2.2
3.3
mA
3.5
5.0
mA
6.0
9.2
mA
1.5
2.2
mA
1.8
2.7
mA
3.0
4.5
mA
20
%V
S
%V
S
V
pk-pk
V
pk-pk
60
%
8
ns
15
pF
10/10
Kohm/pF
ppm
2.7
Volts
3.0
Volts
4.5
Volts
+50
µA
Kohm
3
%
%V
S
%V
S
µA
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
Electrical Specifications
30
+100
-95
-125
-145
-152
-155
Output enabled. Logic “1” or “Open”
Output disabled. Logic “0” or “GND”
10 Hz Offset
100 Hz Offset
1 KHz Offset
10 KHz Offset
100 kHz Offset
100 g
10 g from 10 to 2000 Hz
RoHS Compliant
Environmental
Shock
Vibration
Solderability
Package
Max Soldering Conditions
MIL-STD-202, Method 213, Condition C
MIL-STD-202, Methods 201 & 204
EIAJ-STD-002
5.0 x 7.0 x 2.0 mm, SMT
See solder profile
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M611x Series
Phase Noise Plot
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Output Waveform (HCMOS Output)
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M611x Series
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Product Dimension & Pinout Information - Package Code N (10 Pad)
Pin Connections
Function
Pad
Vref or N/C*
1
N/C - Do Not Connect
2
N/C - Do Not Connect
3
Ground
4
Output
5
N/C - Do Not Connect
6
N/C - Do Not Connect
7
Tristate
8
Supply Voltage (V
s
)
9
Control Voltage
10
*Vref is not available for stabilities
less than ±1.0 ppm
Part Marking Guide
Line
Description
1
Part family, year,
month of production
2
Frequency
SUGGESTED SOLDER PAD LAYOUT
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M611x Series
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Product Dimension & Pinout Information - Package Code T (4/5 Pad)
Pin Connections
Function
Vcontrol
N/C - Do Not Connect
N/C - Do Not Connect
Ground
N/C - Do Not Connect
Output
Tristate or
N/C - Do Not Connect
Power
N/C - Do Not Connect
Pad
1
A
B
2
C
3
4
5
D
Part Marking Guide
Line
Description
1
Part family, year,
month of production
2
Frequency
SUGGESTED SOLDER PAD LAYOUT
WITHOUT TRISTATE (4 PAD)
SUGGESTED SOLDER PAD LAYOUT
WITH TRISTATE (5 PAD)
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
[i=s]This post was last edited by ljj3166 on 2018-9-30 23:03[/i] 0.Written at the beginningThis DIY project originated from the children's programming education that I came into contact with when I to...
Wearable devices are becoming more and more popular nowadays. How can we apply the knowledge we have learned to them? If we want to develop wearable devices in the future, what preparations should we ...
Please look at the following two functions. When the program executes to (1), if an RTC interrupt occurs suddenly, will it cause dyjc not to be equal to 1190 after the close function is executed?The r...
Single chip control system requirements: 1 input, 3 outputs (2 of which control solenoid valve outputs, 1 control relay output) Function: count the input points, input and output once, solenoid valve ...
Physical display:[b]Circuit Function and Advantages[/b] The circuit shown in the figure is a fully isolated low-power pH sensor signal conditioner and digitizer with automatic temperature compensation...
The TIA Portal software's shift instructions shift the contents of an accumulator bit by bit to the left or right. The number of bits shifted is determined by N. A left shift of N bits multiplies t...[Details]
The core of a machine vision system is image acquisition and processing. All information comes from images, and image quality is crucial to the entire vision system. A good image can improve the st...[Details]
Flip-chip and ball grid array (BGA) are two widely used packaging technologies in the electronics industry. Each has its own advantages and limitations, and in some cases, they can complement each ...[Details]
Reflow soldering, a common soldering method in modern electronics manufacturing, primarily melts solder paste and pads to form solder joints. With technological advancements, soldering equipment ha...[Details]
A parallel inverter consists of two thyristors (T1 and T2), a capacitor, a center-tapped transformer, and an inductor. The thyristors provide a current path, while the inductor L maintains a consta...[Details]
In recent years, many people have switched to new energy vehicles, and this type of vehicle has indeed been highly sought after and is considered the future direction of automobile development, and...[Details]
On August 25th, Apple's expansion in India encountered new troubles. According to Bloomberg, Foxconn Technology Group has recalled approximately 300 Chinese engineers from India, further hindering ...[Details]
According to foreign media reports, BMW has just been granted a patent for a screen that could cover the entire roof. BMW hopes to transform at least a portion of the vehicle's headliner into a dis...[Details]
Overview
As handheld voice communication devices become more and more popular, they are increasingly used in noisy environments, such as airports, busy roads, crowded bars, etc. In such noisy ...[Details]
With the continuous development of the industrial automation industry, we are seeing an increasing number of intelligent devices using flexible, efficient, and precise robotic arms to p...[Details]
Compared to cloud databases, minicomputers are purpose-built for decentralized, rugged computing at the edge of the network. By moving applications, analytics, and processing services closer to the...[Details]
On August 22, the Wall Street Journal reported on the 21st local time that the new US government does not plan to acquire equity in semiconductor wafer foundry giant TSMC and Micron, one of the thr...[Details]
Intel®
Xeon®
6
-
core processors now support the new Amazon EC2 R8i and R8i-flex instances on Amazon Web Services (AWS).
These new instances offer superior performance and fast...[Details]
A pure sine wave inverter has a good output waveform with very low distortion, and its output waveform is essentially the same as the AC waveform of the mains power grid. In fact, the AC power prov...[Details]
Previously, Positive Motion Technology shared with you the firmware upgrade of motion controller, ZBasic program development, ZPLC program development, communication with touch screen and input/out...[Details]
Download Centre
京公网安备 11010802033920号
EEWORLD
