P
RELIMINARY
C
USTOMER
P
ROCUREMENT
S
PECIFICATION
1
Z0220100ZCO
M
ODEM
E
VALUATION
K
IT
FEATURES
s
1
Supported Devices
Part Number
Z02201
Z02205
Package Type
44-Pin PLCC
28-Pin SOIC
s
s
–
–
–
–
Shipped with North America-style DAA
Socket for DAA Module Allows User-Defined DAA
Eye Pattern Port
One RS-232C Serial Port with DB25 Connectors
User Manual for Demonstration Board
“Diplomat” PC-based Configuration Utility to Allow
Configuration of Modem Controller Code for Worldwide
Country Support
Object Code to be Modified by the Diplomat
Configuration Utility
s
Z02201 Modem Evaluation Board Includes:
– Supported Protocols: V.22bis, V.22, V.21, V.23, Bell
103, Bell 212A
– AT Commands for Modem Control and
Configuration
s
GENERAL DESCRIPTION
The Modem Evaluation Kit (Z0220100ZCO) is a general-
purpose platform that allows users to evaluate the capabil-
ities and operation of the Z02201 Modem DSP and Analog
Front End, and the Z02205 Modem controller. The kit con-
tains an assembled circuit board, software, and documen-
tation to support software and hardware development for
low speed embedded modem applications.
The demonstration board provides connections to the
phone network (RJ11) and to a PC (RS232). Eye pattern
output allows the display of the modem signal on an X-Y
oscilloscope. LED indicators provide a visual display of
various modem signals. A speaker provides an audible
monitor of modem handshake and dialing tones.
The Diplomat PC-based Configuration utility allows the
user to configure modem controller code to meet the re-
quirements in various countries. Look-up tables are provid-
ed that enable modification of dial modifiers and call
progress parameters to accommodate the needs of vari-
ous phone networks.
SPECIFICATIONS
Dimensions
Approximately 5 inches by 7 inches
Power Requirements
+12V AC
±
5%, 1 A (typical)
Serial Interface
RS-232C
Environmental Operating Conditions
Operating Temperature: +20
°
C
±
10
°
C
Relative Humidity: 10-90%, non-condensing
CP97FMO0501
PRELIMINARY
1
Z0220100ZCO
Modem Evaluation Kit
Zilog
KIT CONTENTS
Hardware
– Modem Evaluation Card including modem DSP
code in on-chip ROM, and modem controller code
in on-chip ROM
– 12VAC power converter (110V wall supply).
Connector is 2.1mm (inner diameter) by 5.5mm
(outer diameter) female type
– RJ11 Phone Cord (6 feet length)
3.5” High Density Floppy Disk
– Utility Program for configuring modem controller
code for use in different countries
–
Hex Object Code to be Modified
Sample Datapump Driver Code Written in C
read.me file includes instructions for using the eval
kit
Documentation
– Evaluation Kit User Manual
– Low Speed Embedded Modem Chipsets
DataBook
– Schematics of the demonstration board in OrCAD
for Windows
– “Print files” of board schematic
–
–
Net list of evaluation board
Registration Card
–
–
ADDITIONAL REQUIRED AND OPTIONAL ITEMS
Required Items Not Supplied with Kit
– IBM PC (or compatible) with the following
minimum
1
recommended configuration:
–
–
–
–
–
–
–
386 CPU, 33 MHz
4 MB of RAM
Hard disk drive (1 MB free space)
2
VGA video adapter
3.5-inch high-density floppy disk drive
RS-232C communications port
Windows
®
3.1 or Windows 95
Optional Items Not Supplied with Kit
– CP Clare DAA Modules
CP Clare Corporation
78 Cherry Hill Drive
Beverly, MA 01915-1048
TEL: 978-524-6700
FAX: 978-524-4700
1-800-CP-CLARE
NET: www.cpclare.com
Z89C50 ICEBOX Z8 Emulator for modifications to
modem controller code and to program Z02205
Modem Controller
Additional jumper wires and shunts
C-compiler for modem controller code -- Z8C
Code Development System (available from
Bytecraft Limited):
Bytecraft Limited
421 King Street North
Waterloo, Ontario, Canada N2J 4E4
TEL: 1-519-888-6911
FAX: 1-519-746-6751
NET: www.bytecraft.com
Notes:
1. For increased performance we recommend a 486- or
Pentium-based machine operating at 66 MHz or fast-
er with 8 MB of RAM.
2. Additional disk space may be required for terminal
emulator program(s), C compiler, and user-generat-
ed source files.
–
–
–
–
–
–
A terminal emulator program such as Windows
Terminal, HyperTerm™ or ProComm™ running on
the PC
RS-232C cable to connect the card to the host PC
25-pin to 9-pin adaptor
2
PRELIMINARY
CP97FMO0501
Zilog
Z0220100ZCO
Modem Evaluation Kit
PRECAUTIONS AND LIMITATIONS
There are no known anomalies with the Evaluation Card it-
self. However, there a small number of anomolies with the
Z02201 device included on the board. The errata is listed
below.
The Z02201 chip on the card is mounted in a socket to al-
low replacement with newer versions of the device as they
become available. For ease of replacement, Zilog recom-
mends the use of the AMP extraction tool noted above.
Known Anomalies With Z02201 R3470
There is only one currently known problem on the Z02201,
ROM code R3470:
1. DPBUSY bit is not properly set during timed DTMF
operation. As this is a new feature in the R3470 code
set, it is not a problem for those users that are used to
the feature set of previous ROM codes. A
microcontroller workaround is available.
1
Development Projects:
Customer is cautioned that while reasonable efforts will be
employed to meet performance objectives and milestone
dates, development t is subject to unanticipated problems
Pre-Characterization Product:
The product represented by this CPS is newly introduced
and Zilog has not completed the full characterization of the
product. The CPS states what Zilog knows about this
product at this time, but additional features or non-
conformance with some aspects of the CPS may be found,
Low Margin:
Customer is advised that this product does not meet
Zilog's internal guardbanded test policies for the
specification requested and is supplied on an exception
basis. Customer is cautioned that delivery may be
uncertain and that, in addition to all other limitations on
© 1998 by Zilog, Inc. All rights reserved. No part of this
document may be copied or reproduced in any form or by
any means without the prior written consent of Zilog, Inc.
The information in this document is subject to change
without notice. Devices sold by Zilog, Inc. are covered by
warranty and patent indemnification provisions appearing
in Zilog, Inc. Terms and Conditions of Sale only.
ZILOG, INC. MAKES NO WARRANTY, EXPRESS,
STATUTORY, IMPLIED OR BY DESCRIPTION,
REGARDING THE INFORMATION SET FORTH HEREIN
OR REGARDING THE FREEDOM OF THE DESCRIBED
DEVICES
FROM
INTELLECTUAL
PROPERTY
INFRINGEMENT. ZILOG, INC. MAKES NO WARRANTY
OF MERCHANTABILITY OR FITNESS FOR ANY
PURPOSE.
Zilog, Inc. shall not be responsible for any errors that may
appear in this document. Zilog, Inc. makes no commitment
to update or keep current the information contained in this
document.
and delays. No production release is authorized or
committed until the Customer and Zilog have agreed upon
a Customer Procurement Specification for this project.
either by Zilog or its customers in the course of further
application and characterization work. In addition, Zilog
cautions that delivery may be uncertain at times, due to
start-up yield issues.
Zilog liability stated on the front and back of the
acknowledgment, Zilog makes no claim as to quality and
reliability under the CPS. The product remains subject to
standard warranty for replacement due to defects in
materials and workmanship.
Zilog’s products are not authorized for use as critical
components in life support devices or systems unless a
specific written agreement pertaining to such intended use
is executed between the customer and Zilog prior to use.
Life support devices or systems are those which are
intended for surgical implantation into the body, or which
sustains life whose failure to perform, when properly used
in accordance with instructions for use provided in the
labeling, can be reasonably expected to result in
significant injury to the user.
Zilog, Inc. 210 East Hacienda Ave.
Campbell, CA 95008-6600
Telephone (408) 370-8000
FAX 408 370-8056
Internet: http://www.zilog.com
CP97FMO0501
PRELIMINARY
3
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
