The LM1117 is a series of low dropout voltage regulators
with a dropout of 1.2V at 800mA of load current. It has the
same pin-out as National Semiconductor’s industry standard
LM317.
The LM1117 is available in an adjustable version, which can
set the output voltage from 1.25V to 13.8V with only two ex-
ternal resistors. In addition, it is also available in three fixed
voltages, 2.85V, 3.3V, and 5V.
The LM1117 offers current limiting and thermal shutdown. Its
circuit includes a zener trimmed bandgap reference to as-
sure output voltage accuracy to within
±
1%.
The LM1117 series is available in SOT-223, TO-220, and
TO-252 D-PAK packages. A minimum of 10µF tantalum ca-
pacitor is required at the output to improve the transient re-
sponse and stability.
Features
n
n
n
n
n
n
n
Available in 2.85V, 3.3V, 5V, and Adjustable Versions
Space Saving SOT-223 Package
Current Limiting and Thermal Protection
Output Current
800mA
Temperature Range
0˚C to 125˚C
Line Regulation
0.2% (Max)
Load Regulation
0.4% (Max)
Applications
n
n
n
n
n
2.85V Model for SCSI-2 Active Termination
Post Regulator for Switching DC/DC Converter
High Efficiency Linear Regulators
Battery Charger
Battery Powered Instrumentation
Typical Application
Active Terminator for SCSI-2 Bus
Fixed Output Regulator
1
LM1117 800mA Low-dropout Linear Regulator
Ordering Information
Package
3-lead SOT-223
Temperature Range
0˚C to +125˚C
LM1117-ADJ-223
LM1117-2.85-223
LM1117-3.3-223
LM1117-5.0-223
3-lead TO-220
LM1117-ADJ-220
LM1117-2.85-220
LM1117-3.3-220
LM1117-5.0-220
3-lead TO-252
LM1117-ADJ-252
LM1117-2.85-252
LM1117-3.3-252
LM1117-5.0-252
Packing
Tape and Reel
Tape
and Reel
Tape and Reel
Tape and Reel
Rails
Rails
Rails
Rails
Tape and Reel
Tape and Reel
Tape and Reel
Tape and Reel
5 lead available
suffix add 252-5L
5 lead available
suffix add 220-5L
Block Diagram
2
LM1117 800mA Low-dropout Linear Regulator
Connection Diagrams
SOT-223
DS100919-4
Top View
TO-220
DS100919-2
Top View
TO-252
DS100919-38
Top View
3
LM1117 800mA Low-dropout Linear Regulator
Absolute Maximum Ratings
(Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Maximum Input Voltage (V
IN
to GND)
LM1117-ADJ, LM1117-3.3,
LM1117-5.0
Power Dissipation (Note 2)
Junction Temperature (T
J
)
(Note 2)
Storage Temperature Range
Lead Temperature
20V
Internally Limited
150˚C
-65˚C to 150˚C
TO-220 Package
SOT-223 Package
ESD Tolerance (Note 3)
260˚C, 10 sec
260˚C, 4 sec
2000V
Operating Ratings
(Note 1)
Input Voltage (V
IN
to GND)
LM1117-ADJ, LM1117-3.3,
LM1117-5.0
LM1117-2.85
Junction Temperature Range (T
J
)
(Note 2)
15V
10V
0˚C to 125˚C
Electrical Characteristics
Typicals and limits appearing in normal type apply for T
tion temperature range for operation, 0˚C to 125˚C.
Symbol
V
REF
Parameter
Reference Voltage
J
= 25˚C. Limits appearing in
Boldface
type apply over the entire junc-
Min
(Note 5)
1.238
1.225
Typ
(Note 4)
1.250
1.250
Max
(Note 5)
1.262
1.270
Units
V
V
Conditions
LM1117-ADJ
I
OUT
=10mA, V
IN
-V
OUT
=2V, T
J
=25˚C
10mA≤I
OUT
≤
800mA, 1.4V≤
V
IN
-V
OUT
≤10V
LM1117-2.85
I
OUT
=10mA, V
IN
=4.85V, T
J
=25˚C
O≤I
OUT
≤800mA,
4.25V≤ V
IN
≤10V
O≤I
OUT
≤500mA,
V
IN
=4.10V
LM1117-3.3
I
OUT
=10mA, V
IN
=5V T
J
=25˚C
O≤I
OUT
≤800mA,
4.75V≤ V
IN
≤10V
LM1117-5.0
I
OUT
=10mA, V
IN
=7V, T
J
=25˚C
O≤I
OUT
≤
800mA, 6.5V≤ V
IN
≤12V
V
OUT
Output Voltage
2.820
2.790
2.790
3.267
3.235
4.950
4.900
2.850
2.850
2.850
3.300
3.300
5.000
5.000
0.035
1
1
1
0.2
1
1
1
1.10
1.15
1.20
2.880
2.910
2.910
3.333
3.365
5.050
5.100
0.2
6
6
10
0.4
10
10
15
1.20
1.25
1.30
1500
5
V
V
V
V
V
V
V
%
mV
mV
mV
%
mV
mV
mV
V
V
V
mA
mA
∆V
OUT
Line Regulation
(Note 6)
LM1117-ADJ
I
OUT
=10mA, 1.5V≤ V
IN
-V
OUT
≤13.75V
LM1117-2.85
I
OUT
=0mA, 4.25V≤ V
IN
≤10V
LM1117-3.3
I
OUT
=0mA, 4.75V≤ V
IN
≤15V
LM1117-5.0
I
OUT
=0mA, 6.5V≤ V
IN
≤15V
∆V
OUT
Load Regulation
(Note 6)
LM1117-ADJ
V
IN
-V
OUT
=3V, 10≤I
OUT
≤800mA
LM1117-2.85
V
IN
=4.25V, 0≤I
OUT
≤800mA
LM1117-3.3
V
IN
=4.75V, 0≤I
OUT
≤800mA
LM1117-5.0
V
IN
=6.5V, 0≤I
OUT
≤800mA
V
IN
-V
OUT
Dropout Voltage
(Note 7)
Current Limit
Minimum Load
Current (Note 8)
I
OUT
=100mA
I
OUT
=500mA
I
OUT
=800mA
V
IN
-V
OUT
=5V, T
J
=25˚C
LM1117-ADJ
V
IN
=15V
800
I
LIMIT
1200
1.7
4
LM1117 800mA Low-dropout Linear Regulator
Electrical Characteristics
Symbol
Parameter
Quiescent Current
(Continued)
J
Typicals and limits appearing in normal type apply for T
tion temperature range for operation, 0˚C to 125˚C.
= 25˚C. Limits appearing in
Boldface
type apply over the entire junc-
Min
(Note 5)
Typ
(Note 4)
5
5
5
0.01
60
75
60
120
5
Max
(Note 5)
10
10
10
0.1
Units
mA
mA
mA
%/W
dB
µA
µA
%
%
%
˚C/W
˚C/W
˚C/W
˚C/W
˚C/W
˚C/W
Conditions
LM1117-2.85
V
IN
≤10V
LM1117-3.3
V
IN
≤15V
LM1117-5.0
V
IN
≤15V
Thermal Regulation
Ripple Regulation
Adjust Pin Current
Adjust Pin Current
Change
Temperature Stability
Long Term Stability
RMS Output Noise
Thermal Resistance
Junction-to-Case
Thermal Resistance
Junction-to-Ambient
(No heat sink;
No air flow)
T
A
=25˚C, 30ms Pulse
f
RIPPLE
=120Hz, V
IN
-V
OUT
=3V
V
RIPPLE
=1V
PP
10≤ I
OUT
≤
800mA,
1.4V≤ V
IN
-V
OUT
≤
10V
T
A
=125˚C, 1000Hrs
(% of V
OUT
), 10Hz≤f≤10kHz
3-Lead SOT-223
3,5 -Lead TO-220
3,5 -Lead TO-252
3-Lead SOT-223
3,5 -Lead TO-220
3,5 -Lead TO-252(Note 9)
0.2
0.5
0.3
0.003
15.0
3.0
10
136
79
92
Note 1:
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is in-
tended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.
Note 2:
The maximum power dissipation is a function of T
J(max)
,
θ
JA
, and T
A
. The maximum allowable power dissipation at any ambient temperature is P
D
= (T
J-
(max)
–T
A
)/θ
JA
. All numbers apply for packages soldered directly into a PC board.
Note 3:
For testing purposes, ESD was applied using human body model, 1.5kΩ in series with 100pF.
Note 4:
Typical Values represent the most likely parametric norm.
Note 5:
All limits are guaranteed by testing or statistical analysis.
Note 6:
Load and line regulation are measured at constant junction room temperature.
Note 7:
The dropout voltage is the input/output differential at which the circuit ceases to regulate against further reduction in input voltage. It is measured when the
output voltage has dropped 100mV from the nominal value obtained at V
IN
=V
OUT
+1.5V.
Note 8:
The minimum output current required to maintain regulation.
We want to use the AD of STM32F103 to design a touch screen (that is, to save the touch screen driver IC). Is this feasible? Does ST currently have such a design?Thank you!...
I saw it in a newspaper before. It's very simple. A light source, preferably a point light source, and a camera can do it. I originally wanted to use a high-brightness light-emitting tube as the light...
Sunwave Communications Co., Ltd. (hereinafter referred to as Sunwave Communications, stock code: 002115 ) was established in May 1993. Its headquarters is located in Binjiang, Hangzhou. It is a nation...
I just got a sm32l053 nucleo development board through group buying, and found that there was no HSE crystal on the board. I just soldered an 8MHz crystal. I downloaded a few official examples and deb...
[i=s]This post was last edited by lb8820265 on 2019-11-30 22:15[/i]The content shared this time is relatively hardcore and will only be encountered when using the serial port for high-speed data commu...
The core of a machine vision system is image acquisition and processing. All information comes from images, and image quality is crucial to the entire vision system. A good image can improve the st...[Details]
1. Equipment Overview
Shell-and-tube heat exchangers are a common heat exchange device used in chemical evaporation and heating equipment. Currently, the tubesheets of shell-and-tube heat exch...[Details]
On August 25th, SK Hynix announced that it has completed development and entered mass production of its 321-layer, 2Tb QLC NAND flash memory product. This achievement marks the world's first applic...[Details]
On August 22nd, Lantu Motors unveiled a new technology called "Lanhai Intelligent Hybrid" during a live broadcast of CCTV News' "Top Laboratory." The name sounds like another new term, but a closer...[Details]
Robotics
has become
LiDAR
's "second growth curve."
While LiDAR was still battling with its "pure vision" rivals in the automotive field, another field ignited the demand f...[Details]
The all-new MG4 was recently officially announced on the Ministry of Industry and Information Technology's (MIIT) new vehicle announcement. The all-new MG4's semi-solid-state battery version addres...[Details]
introduction
Sonar imaging is of great significance in marine resource development and defense. Its long range, intuitive display of the observed area, and target identification make it widely...[Details]
Since its invention in the mid-1940s, the microwave oven has evolved from a humble beginning to commercial use, entering homes in the 1960s and rapidly gaining popularity. Its basic functionality a...[Details]
Electric vehicles' 12V batteries don't rely on a generator to power them. Only gasoline-powered vehicles rely on the engine to drive a generator to generate electricity while driving, which is used...[Details]
SMT placement machines are important equipment in surface mount technology (Surface Mount Technology). Their performance has a decisive impact on the quality and efficiency of electronic manufactur...[Details]
A multilevel inverter converts a DC signal into a multilevel staircase waveform. Instead of a straight positive-negative output waveform, the output waveform of a multilevel inverter alternates in ...[Details]
Reflow soldering, as an electronics assembly process, has become a vital component of the electronics manufacturing industry. Choosing reflow soldering equipment is crucial for improving production...[Details]
On August 21st, BYD announced the launch of its next-generation "Little White Pile" product, the "Lingchong"
charging
pile
, which is now available for general sale. This charging pile feat...[Details]
Lightweighting of automobiles is still a relatively unfamiliar term for automobiles. With the continuous improvement of environmental protection requirements, relevant regulations have also put for...[Details]
With growing environmental awareness, the continuous improvement of three-electric technology and the increasing deployment of infrastructure such as charging stations, the electrification of new e...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
