REVISION FH
DO NOT
SCALE FROM
THIS PRINT
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. PARTS MAY BE CUT TO POSITION.
No OF POSITIONS
3. MAXIMUM CUT FLASH: .015[0.38],
-02 THRU -50
LOOSE FLASH MUST BE REMOVED.
(PER ROW)
4. MINIMUM PUSHOUT FORCE: 1.0 LB.
LEAD STYLE
5. MEASURED AT BEND RADIUS, NOT AT END OF PIN.
6. TUBE ONLY -04 THROUGH -50 POSITIONS (SEE TABLE 2).
-01: .120 [3.05]
7. SHEAR TAILS TO DIMENSION SHOWN.
-02: .075 [1.91]
8. MAXIMUM BURR ALLOWANCE: .003 [0.08]
-03: .065 [1.65]
9. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL.
-04: .150 [3.81]
10. FILL WITH ALIGNMENT PIN HOLES TO TAIL SIDE.
-05 .170 [4.32]
11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, LOCKING CLIPS
-14: .150 [3.81](NOT AVAILABLE
ARE NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
WITH -SM, FM, LM PLATING
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH LOCKING CLIPS.
OPTIONS)
12. VOIDS MAY OR MAY NOT BE PRESENT ON POSITIONS 5 THRU 8 AND CAN
BE MIXED WITHIN AN ORDER.
PLATING SPECIFICATION
13. ON LEAD STYLES -02 THROUGH -03 THE T-1S15-18-XXX CAN
BE SUBSTITUTED FOR T-1S15-16-XXX.
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
14. ON LEAD STYLES -01 AND -04, T-1S15-17 CAN BE
MATTE TIN ON TAIL
SUBSTITUTED FOR T-1S15-15-XXX.
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
15. NO TIN PLATING ALLOWED ON THE POST FOR
MATTE TIN ON TAIL
LEAD STYLES -01, -02, -03 & -04 IN COMBINATION WITH THE
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
T-1S15-XX-XXX TERMINAL.
MATTE TIN ON TAIL
16. MAXIMUM HEIGHT VARIATION .005[0.13] BETWEEN ROWS.
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
C
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
+.005 +0.13
No OF POS x .0500
-.010
[
-0.25
]
MATTE TIN ON TAIL
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
(No OF POS x .0500[1.27]) - .050[1.27]
MATTE TIN ON TAIL
02
50
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,
TIN/LEAD (90/10+/-5%) TAIL
-G: 10µ" GOLD IN CONTACT AREA,
.135 3.43
3µ" GOLD ON TAIL
REF
FTSH-1XX-XX-XXX-DV-XXX-XXX
*
-P: PICK & PLACE PAD (4 POS MIN)
(SEE FIG 11, SHT 4 & TABLE 5)
-TR: TAPE & REEL PACKAGING
-ES: END SHROUDS (SEE FIG 6, SHT 3)
(MOLDED IN 5 POS MIN; -02 & -03 LEAD STYLE ONLY)
(SNAP SHROUDS 9 POS MIN; -02 & -03 LEAD STYLE ONLY)
-EJ: EJECTOR SHROUDS: SEE FIG 4, SHT 2)
(10 POS MIN; -01 LEAD STYLE ONLY)
-EJM: EJECTOR SHROUDS WITH MOLDED ALIGNMENT PIN
(SEE FIG 5, SHT 2; 10 POS MIN; -01 LEAD STYLE ONLY)
(NOT VALID WITH -A OPTION)
-EJC: EJECTOR SHROUDS WITH LOCKING CLIP
(SEE FIG 5, SHT 2 & NOTE 11)
(10 POS MIN; -01 LEAD STYLE ONLY; NOT VALID WITH -A OPTION)
-EC: LOCKING CLIP (SEE FIG 7, SHT 3 & NOTE 11)
(9 POS MIN; -02 & -03 LEAD STYLE ONLY)
-EP: GUIDE POST (SEE FIG 8, SHT 3; 9 POS MIN; -02 & -03 LEAD STYLE
ONLY)(USE ONLY WHEN MATING WITH CLP)
-EL: BOARD LOCK (SEE FIG 9, SHT 3)
(9 POS MIN; -02 & -03 LEAD STYLE ONLY)
(USE ONLY WHEN MATING WITH CLP)
-EPC: GUIDE POST & LOCKING CLIP
(SEE FIG 10, SHT 3 & NOTE 11; USE ONLY WHEN MATING WITH CLP)
(9 POS MIN; -02 & -03 LEAD STYLE ONLY; NOT VALID
WITH -A OPTION)
-A: ALIGNMENT PIN (MOLDED OR STAKED; SEE FIG 3, SHT 2)
(MOLDED: 3 POS MIN; STAKED: 6 POS MIN)
(SAMTEC DISCRETION ON WHICH -A PIN USED)
-K: KEYING OPTION FOR MATING WITH FFSD
(SEE TABLE 3, SHT 2; 05 THRU 25 AVAILABLE AS STANDARD)
(POSITION 13, 17, 20 & 25 AVAILABLE WITH -EXX OPTION)
(LEAD STYLE -01 ONLY, SEE FIG 2, SHT 2 & NOTE 12)
(ALIGNMENT PIN AVAILABLE WITH -K OPTION BUT MUST BE MOLDED)
(MUST USE FTSH-50-CN-XX-X OR FTSHC-50-CN-XX-X)
-M: METAL PICK & PLACE PAD (5 POS MIN; USE MPP-22-5)
(SEE FIG 12, SHT 4; NOT AVAILABLE WITH -K OPTION)
OPTIONS
TAIL OPTION
-DV: DOUBLE VERTICAL
01
FTSH-50-D
.016 0.41 SQ
REF (TYP)
"B"
CONTACT AREA
(SEE NOTE 9 & TABLE 1)
POLARIZING OPTION
49
2 MAX SWAY
(EITHER DIRECTION)
2 MAX SWAY
(EITHER DIRECTION)
SEE TABLE 1
C
90°±3°
C
.050±.008 1.27±0.20
XXX INDICATES POSITION TO BE OMITTED
(NOT AVAILABLE WITH EXX OPTIONS)
(ONLY AVAILABLE WITH -F, -FM, -L, -LM PLATING OPTIONS)
* = NOT ENGINEERING APPROVED
2 MAX SWAY
(EITHER DIRECTION)
"A"
C
(SEE NOTE 16)
SEE NOTE 3
(2 PLCS)
.099 2.51
REF
.004[.10]
.115
- .003
2.92
- 0.08
(SEE NOTE 5)
.23 5.8
(SEE NOTE 7)
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
+.005
+0.13
PATENT NUMBERS
5713755 / 5961339
FTSH-1XX-XX-XXX-DV SHOWN
FIG 1
SEE NOTE 8
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
*
.230 5.84 REF
HAND FILL USING T-1S40
*
PROPRIETARY NOTE
.XX: .01 [.3]
1
.XXX: .005 [.13]
.XXXX: .0010 [.025]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 5:1
INSULATOR: LCP UL 94 VO
TERMINAL: PHOSPHOR BRONZE
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP
* = SEE NOTE 13
*** = SEE NOTE 14
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW
BY:
PURVIS
FTSH-1XX-XX-XXX-DV-XXX-XXX
10/12/1995
SHEET
1
OF
5
REVISION FH
02
.135 3.43
REF
01
C
L
.085 2.16 REF
.200 5.08 REF
.126 3.20 REF
(No OF POS x .0500[1.270])
- .012
[
+.005
+0.13
-0.30
]
USE SUB-FTSH-EJEHA
(2 REQ'D PER ASSEMBLY, EACH
USES 1 EHA-02 & 1 FTSH-EJ)
.222 5.65
REF
.440 11.18
REF
(No OF POS x .050[1.27])+.621[15.77]
±.010[0.25]
C
(No OF POS x .050[1.27])+.772[19.61] REF
FTSH-50-D
.392 9.96
REF
SEE NOTE 12
-K OPTION
(LEAD STYLE -01 ONLY)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(POSITION 13, 17, 20 & 25 AVAILABLE WITH
-EXX OPTION)
C
L
USE SUB-FTSH-EJEHA
(2 REQ'D PER ASSEMBLY, EACH
USES 1 EHA-02 & 1 FTSH-EJ)
FIG 2
FTSH-50-CN-XX-X
OR FTSHC-50-CN-XX-X
-EJ OPTION (SHROUDS OPEN)
.076 1.93 REF
-EJ OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(-01 LEAD STYLE ONLY)
USE SUB-FTSH-EJEHA-A
(2 REQ'D PER ASSEMBLY, EACH
USES 1 EHA-02 & 1 FTSH-EJ-A)
FIG 4
FTSH-50-D
(SEE NOTE 10)
.034 0.86
C
C
L
C
L
(No OF POS - 2)
x .050[1.27]
C
SM-A9H
LC-05-TM
-EJC
.085
- .000
2.16
.034 0.86
.050 1.27 REF
+.005
+0.13
0.00
.035 0.89
REF
(STAKED ALIGNMENT PINS)
2 MAX SWAY
(EITHER DIRECTION)
C
L
FTSH-50-D-XX
.010 0.25 REF
-EJC
.035 0.89
REF
-EJM
.05 1.3
REF
-EJM
-EJC & -EJM OPTIONS
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 4)
(-01 LEAD STYLE ONLY)
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
FIG 5
*
PROPRIETARY NOTE
*
(No OF POS - 2)
x .050[1.27]
FULL R
(MOLDED ALIGNMENT PINS)
.035 0.89
REF
-A OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(6 POSITION MINIMUM FOR STAKED ALIGNMENT PINS)
(3 POSITION MINIMUM FOR MOLDED ALIGNMENT PINS)
FIG 3
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP
DWG. NO.
FTSH-1XX-XX-XXX-DV-XXX-XXX
PURVIS
10/12/1995
SHEET
2
OF
5
BY:
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW
REVISION FH
02
.188 4.78
REF
C
(No OF POS x .050[1.27])+.101[2.57]±.008[0.20]
ES-FTSH
.168 4.27
REF
.194 4.91
FTSH-50-D
(SEE NOTE 10)
.293 7.44
REF
(No OF POS x .050[1.27])+.231[5.87]±.008[0.20]
.265 6.73 REF
.139 3.53
REF
.075 1.91 REF
.120 3.05 REF
(No OF POS x .050[1.27])+.156[3.96] REF
FTSH-EP
C
.032[0.81] REF
CHAMFER
01
.288 7.32
REF
.314 7.96
-EP OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)
(USE ONLY WHEN MATING WITH CLP)
(No OF POS x .050[1.27])+.257[6.53] REF
(No OF POS x .050[1.27])+.153[3.89] REF
FTSH-EL
.125 3.18
REF
FIG 8
(SNAP SHROUDS)
(No OF POS (PER FINISHED ASSEMBLY)
+2) X .050 [1.27] REF
02
.1750 4.445
REF
01
FTSH-49-ES-XX-X
.178 4.51
REF
.0960 2.438
REF
.319 8.09
(No OF POS x .050[1.27])+.223[5.66] .008[0.20]
-EL OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)
(USE ONLY WHEN MATING WITH CLP)
(No OF POS x .050[1.27])+.231[5.87]±.008[0.20]
(No OF POS x .050[1.27])+.156[3.96] REF
C
.032[0.81] REF
CHAMFER
FIG 9
.0990 2.515 REF
.075 1.91 REF
.120 3.05 REF
FTSH-EP
(MOLDED SHROUDS)
-ES OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(USE -02 OR -03 LEAD STYLE ONLY)
(9 POS MIN FOR SNAP SHROUDS)
(5 POS MIN FOR MOLDED SHROUDS)
(No OF POS x .050[1.27])+.131[3.32]±.008[0.20]
.280 7.11
REF
C
FIG 6
.288 7.32
REF
.314 7.96
LC-05-TM
(No OF POS x .050[1.27])+.079[2.01]±.008[.20]
.055 1.40
-EPC OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)
(USE ONLY WHEN MATING WITH CLP)
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
FIG 10
*
PROPRIETARY NOTE
*
.055 1.40
FTSH-EC
LC-05-TM
(No OF POS x .050[1.27])+.079[3.30]±.008[0.20]
-EC OPTION
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
FIG 7
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW
BY:
PURVIS
FTSH-1XX-XX-XXX-DV-XXX-XXX
10/12/1995
SHEET
3
OF
5
REVISION FH
"M" REF
.20 5.1
REF
.13 3.3 REF
.230 5.84
REF
.065 1.65 REF
.060 1.52 REF
.13 3.3
REF
"P"
.16 4.1
REF
PPP-25-KT
PPP-25
"M" REF = OVERALL LENGTH
"P" ={("M" -.200 [508]) / 2} .020 [.51]
-P OPTION
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
FIG 11
-P
.23 5.8 REF
C
L
FTSH-50-CN-XX
FTSH-50-D
PPP-25-NT
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 2)
-K-P-TR
*MOLDED SHROUD ONLY
** USE PPP-25-NT WITH -TR
-P-TR
PACKAGING ONLY
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
.32 8.1
REF
PPP-41
.16 4.1
REF
.32 8.1
REF
NOTE: TAPE & REEL ORIENTATION:
POLARIZATION NOTCH TO THE RIGHT
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIGS 4 & 5)
"M" REF
"P"
.250 6.35
REF
MPP-22-5
"B"
FTSH-50-D
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
-EJ-P & -EJX -P
.100 2.55 REF
USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
TAPE & REEL VIEW
*
PROPRIETARY NOTE
*
"M" REF = OVERALL LENGTH
"P" = {("M" - .250[6.35]) / 2} ± .020[0.51]
*-M: METAL PICK & PLACE PAD
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(NOT AVAILABLE WITH -K OPTION)(5 POS MIN)
* = NOT ENGINEERING APPROVED
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW
FIG 12
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP
DWG. NO.
BY:
PURVIS
FTSH-1XX-XX-XXX-DV-XXX-XXX
10/12/1995
SHEET
4
OF
5
REVISION FH
PT-FTSH004-DV-EX-A-P-M
PT-FTSH002-DV-A-P-M
PT-FTSH002-DV-A-P-M
PT-FTSH006-DV-EJC-K-P
PT-FTSH002-DV-A-P-M
PT-FTSH004-DV-EX-A-P-M
-DV
(NONE)
PT-FTSH007-DV-K-P
PT-FTSH007-DV-K-P
-ES-P, -ES-A-P
-ES, -ES-A
-A, -A-P
PT-FTSH003-DV-EJC-K
-DV, -P
-EJ, EJX AND -EJ-X
-K-P
(FOR -01 LEAD STYLE ONLY)
-K, -K-A
TUBE VIEWS
"A" - .034 0.864
"A" - .034 0.864
"A" - .034 0.864
FIG 13
ALL -EJ-K OPTIONS
"C" REF
(SEE TABLE 1)
.125±.010 3.18±0.25
(SEE NOTE 7)
.050±.005 1.270±0.127
IN PROCESS 2
IN PROCESS 1
W/O A PINS
W/O A PINS
IN PROCESS 3
W/O A PINS
"A" - .084 2.134
"A" - .084 2.134
"A" -.084[2.134]
"C" REF
(SEE TABLE 1)
.175±.010 4.445±0.254
(SEE NOTE 7)
.100±.005 2.540±0.127
IN PROCESS 1
WITH A PINS*
WITH A PINS*
* = FOR -01, -04, -05 AND -14 LEAD STYLES ONLY
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW
IN PROCESS 2
IN PROCESS 3
WITH A PINS*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP
DWG. NO.
IN-PROCESS VIEWS ARE FOR HANDFILL ONLY
FTSH-1XX-XX-XXX-DV-XXX-XXX
PURVIS
10/12/1995
SHEET
5
OF
5
BY:
京公网安备 11010802033920号
EEWORLD
